aboutsummaryrefslogtreecommitdiff
path: root/drivers/ddr
AgeCommit message (Collapse)Author
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-14arm: mvebu: drivers/ddr: remove redundant assignmentHeinrich Schuchardt
The value of local variable ecc is immediately overwritten. So we can remove the first assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14ddr: marvell: a38x: Allow boards to specify CK_DELAY parameterChris Packham
For some layouts it is necessary to adjust the CK_DELAY parameter to successfully complete DDR training. Add the ability to specify the CK_DELAY in the mv_ddr_topology_map. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2020-04-10Revert "mpc85xx: ddr: Always start DDR RAM in Self Refresh mode"Biwen Li
This reverts commit 2a5d5d27edfbdb0e02a7fcf05569f92c02ae44ee. The commit breaks uboot boot (hang in ddr init) on many PowerPC boards like P3041DS, P4080DS Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05ddr: altera: Add DDR2 support to Gen5 driverMarek Vasut
Add DDR2 support to Gen5 DRAM driver. As the DDR2 macro names generated by Quartus are named differently than the DDR3 ones, use anon unions to store them in the same structures, without growing their size. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-26arm: mvebu: fix A38x breakage from commit bb872dd930ccJoel Johnson
This function parameter usage of load_addr was incorrectly caught in the clarifying renames of commit bb872dd930cc, which results in boot failures on Marvell A38x. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Patch-to: Simon Glass <sjg@chromium.org>
2020-01-21ddr: marvell: a38x: allow board specific clock out setupBaruch Siach
DDR clock out might be unrelated to the number of active chip-select. For example, the board might have two DDR components, but only one chip-select. The clk_enable mask allows the board to enable DDR clocks regardless of active chip-selects. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move the image globals into image.hSimon Glass
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17image: Rename load_addr, save_addr, save_sizeSimon Glass
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08ddr: imx8m: Add DRAM PLL to generate 1000Mhz outputPeng Fan
We will generate DRAM 4000MT/s as default for i.MX8MP. So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC AccessThor Thayer
The ECC registers in the SDRAM HMC Adapter should always be accessible (both when ECC is enabled and disabled). Currently, the registers are accessible only when ECC is enabled. The ECC Enabled bit is used to determine the status of ECC by later OSes so always allow access. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07ddr: altera: agilex: Add SDRAM driver for AgilexLey Foon Tan
Add SDRAM driver for Agilex SoC. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07ddr: altera: Restructure Stratix 10 SDRAM driverLey Foon Tan
Restructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move firewall code to firewall fileLey Foon Tan
Move firewall related code to new firewall.c, to share code in Stratix 10 and Agilex. SDMMC will transfer data to OCRAM in SPL. So, enable privilege for SDMMC to allow DMA transfer to OCRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07ddr: imx8m: Return error values from LPDDR4 trainingFrieder Schrempf
In cases when the same SPL should run on boards with i.MX8MM, that differ in DDR configuration, it is necessary to try different parameters and check if the training done by the firmware suceeds or not. Therefore we return the DDR training/initialization success to the upper layer in order to be able to retry with different settings if necessary. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2019-12-27imx8m: ddr_init: Move ddr_init() messages to debug levelFabio Estevam
Currently inside ddr_init() there is a mix of printf() and debug() level messages. Since this type of information is useful for debug purposes, convert all of them to debug level for consistency. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-23mpc85xx: ddr: Always start DDR RAM in Self Refresh modeJoakim Tjernlund
Some of t1042 boards fails DDR init with an Automatic calibration error every now and then. Investigations revealed that true Warm boots never failed. Warm boots has some extra steps performed, one being to start DDRC in Self Refresh and then clearing SR right after. Applying this SR method unconditionally made all our boards stable again, regardless of Cold/Warm boot. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20ddr: socfpga: gen5: constify altera_gen5_sdram_opsSimon Goldschmidt
Make the function pointer struct const, as it does not need to be writable. This doesn't really change anything other than moving this variable to a different section. No functional change. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-10-08ddr: imx8m: Fix the ddr init hang on imx8mqJacky Bai
On, i.MX8MQ, the PLL config must be done when ddrmix isolation is released. So move the dram pll init after iso config done. For other i.MX8M SOC, either init pll before or after isolation is ok. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08driver: ddr: Refine the ddr init driver on imx8mJacky Bai
Refine the ddr init driver to make it more reusable for different DDR type(LPDDR4, DDR4 & DDR3L). So we can reduce some redundant code. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8mq: Update the ddrc QoS setting for B1 chipBai Ping
Update the ddrc Qos setting for B1 to align with B0's setting. Correct the initial clock for dram_pll. This setting will be overwrite before ddr phy training. Although there is no impact on the dram init, we still need to correct it to eliminate confusion. Signed-off-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Tested-by: Robby Cai <robby.cai@nxp.com>
2019-10-08ddr: imx8m: Fix ddr4 driver build issueYe Li
Since the parameter of dram_pll_init is changed, update to use new. Also remove non-existed header file. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ddr: imx8m: fix ddr firmware location when enable SPL OFPeng Fan
With CONFIG_SPL_OF_CONTROL, the device tree will be padded to end of the u-boot-spl-nodtb.bin, however we also put the ddr firmware file to this location, so need to adapt the code with SPL OF and align to 4 bytes to ease copy firmware. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-26ddr, fsl: add DM_I2C supportHeiko Schocher
add DM_I2C support for this driver. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22boards: lx2160a: Add support of I2C driver modelChuanhua Han
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used. When DM_I2C_COMPAT is not enabled for compilation, a compilation error will be generated. This patch solves the problem that the i2c-related api of the lx2160a platform does not support dm. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-21dm: ddr: socfpga: fix gen5 ddr driver to not use bssSimon Goldschmidt
This driver uses bss from SPL board_init_f(). Change it to move all the data from bss to a common struct allocated on the stack (64 byte). In addition to saving 28 bytes of bss, the code even gets 264 bytes smaller. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-21mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASEMario Six
CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06ddr: altera: Compile ALTERA SDRAM in SPL onlyLey Foon Tan
Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 15:13:13 +0000