aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2021-10-15Convert CONFIG_USB_EHCI_MXS to KconfigMarek Behún
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDIMarek Behún
In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12usb: sandbox: Add gadget callbacksPatrice Chotard
Add usb_gadget_handle_interrupts(), usb_gadget_register_driver() and usb_gadget_unregister_driver() to be able to test binding usb gadget. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12usb: gadget: Add bcdDevice for the DWC2 USB Gadget ControllerPatrice Chotard
Add an entry in usb_gadget_controller_number() for the DWC2 gadget controller. It is used to bind the USB Ethernet driver. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reported-by: Herbert Poetzl <herbert@13thfloor.at> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at>
2021-10-11sunxi: Clean up inclusions of asm/arch/gpio.hSamuel Holland
As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will remove the asm/arch/gpio.h header. In preparation, clean up the various files that include it. Some files did not contain any GPIO code at all, so this header was completely unused. A few files contained only legacy platform-specific GPIO code for setting up pin muxes. They were left unchanged, as that code will be completely removed by the DM_PINCTRL migration. The remaining files contain some combination of DM_GPIO and legacy GPIO code. For those, switch to including asm/gpio.h (if it wasn't included already). Right now, this header provides both sets of functions, because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the right header to include once the DM_GPIO migration is complete and GPIO_EXTRA_HEADER is no longer needed. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-07usb: dwc3: meson-gxl: add AXG compatibleNeil Armstrong
Upstream Linux uses the "amlogic,meson-axg-usb-ctrl" for AXG SoCs. This adds it to the compatible list for this driver. Reported-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
2021-10-01arm: Remove zmx25 board and ARCH_MX25Tom Rini
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01arm: Remove flea3 boardTom Rini
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last mx35 platform, remove that support as well. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-27Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO To do this, we also introduce CONFIG_HAS_CONFIG_OMAP_EHCI_PHYn_RESET_GPIO options to get setting the GPIO number. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27usb: ehci-omap: Drop non-DM_USB legacy codeTom Rini
Now that DM_USB is always enabled, we can drop some legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Convert CONFIG_USB_XHCI_OMAP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_OMAP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27usb: phy: ti: Remove non-DM PHY codeTom Rini
At this point in time, all platforms that had previously used drivers/usb/phy/omap_usb_phy.c have been migrated to DM and related options. Remove this now unused code and some related unused defines. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-22usb: xhci-dwc3: Add support for USB 3.1 controllersMark Kettenis
This adds support for the DWC_sub31 controllers such as those found on Apple's M1 SoC. This version of the controller seems to work fine with the existing driver. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-09-22usb: ehci-mx6: use phy_type from device treeMatthias Schiffer
Allow using different PHY interfaces for multiple USB controllers. When no value is set in DT, we fall back to CONFIG_MXC_USB_PORTSC for now to stay compatible with current board configurations. This also adds support for the HSIC mode of the i.MX7. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-09-22usb: add support for ULPI/SERIAL/HSIC PHY modesMatthias Schiffer
Import usb_phy_interface enum values and DT match strings from the Linux kernel. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-09-22usb: xhci-dwc3: Add support for clocks/resetsSamuel Holland
Some platforms, like the Allwinner H6, do not have a separate glue layer around the dwc3. Instead, they rely on the clocks/resets/phys referenced from the dwc3 DT node itself. Add support for enabling the clocks/resets referenced from the dwc3 DT node. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-09-22usb: xhci-pci: Move reset logic out of XHCI coreSamuel Holland
Resetting an XHCI controller inside xhci_register undoes any register setup performed by the platform driver. And at least on the Allwinner H6, resetting the XHCI controller also resets the PHY, which prevents the controller from working. That means the controller must be taken out of reset before initializing the PHY, which must be done before calling xhci_register. The logic in the XHCI core was added to support the Raspberry Pi 4 (although this was not mentioned in the commit log!), which uses the xhci-pci platform driver. Move the reset logic to the platform driver, where it belongs, and where it cannot interfere with other platform drivers. This also fixes a failure to call reset_free if xhci_register failed. Fixes: 0b80371b350e ("usb: xhci: Add reset controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-09-17Remove #include <version.h> from files which do not need itPali Rohár
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30usb: dwc2: Rename CONFIG_DWC2 namespace to DWC2Tom Rini
There are a number of DWC2 configuration options that are set in dwc2.h and referenced in dwc2.c only. Move these out of the CONFIG_DWC2 namespace and in to the DWC2 namespace. Note that hikey was defining an option that was already always enabled, so we can remove that hunk. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-05pci: usb: ohci: Test on PCI not DM_PCISimon Glass
Now that DM_PCI is always enabled, check on CONFIG_PCI instead. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Update for non-PCI users of this code, reword] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOSTSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-18usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-14usb: musb-new: Add glue driver for ST-Ericsson Ux500Stephan Gerhold
The ST-Ericsson DB8500 SoC contains a MUSB OTG controller which supports both host and gadget mode. For some reason there is nothing special about it - add a simple glue driver for Ux500 that literally just sets up MUSB together with a generic PHY. There are no SoC-specific registers etc needed to make USB work. The new Ux500 glue driver is only tested to work with DM_USB and DM_USB_GADGET. Both host and gadget mode work fine on the u8500 "stemmy" board that is already present in U-Boot. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-07arm: Remove spear600 boards and the rest of SPEAr supportTom Rini
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-06dm: define LOG_CATEGORY for all uclassPatrick Delaunay
Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-24usb: ehci-mx6: Do not fail when 'reg' is not foundFabio Estevam
Unlike imx6, on imx7 the USB PHY is described as: usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX7D_USB_PHY1_CLK>; clock-names = "main_clk"; #phy-cells = <0>; }; which does not have the 'reg' property. Do not return an error when the 'reg' property is not found for the USB PHY. This fixes USB gadget regression on a imx7s-warp board. Successfully tested the "ums 0 mmc 0" command on two boards: imx7s-warp and imx6dl-pico-pi. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-24usb: ehci-mx6: Move fdtdec_get_alias_seq() inside the CONFIG_MX6Fabio Estevam
On a imx7s-warp board the fdtdec_get_alias_seq() function always fails. As priv->portnr is only used on i.MX6, move fdtdec_get_alias_seq() inside the CONFIG_MX6 block. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-16Merge tag 'u-boot-imx-20210616' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-09usb: ehci-mx6: add support for i.MXRTGiulio Benetti
Add support for usb1 and usb2 present on i.IMXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09usb: dwc2: Avoid delay when initializing USB peripheral by dwc2João Loureiro
When `usb start` is called on the terminal, the dwc2 driver will try to start every USB device as host first, even if it is explicitly configured as peripheral in the device tree (dr_mode = "peripheral"). So to avoid an unwanted 15 seconds delay when initializing the usb (one second per channel = 1s x 15), this patch adds a check to the initialization, and will skip host initialization of the device is explicitly set as peripheral. The checking is already done similarly in the `drivers/usb/gadget/dwc2_udc_otg.c` driver. Signed-off-by: João Loureiro <joaofl@gmail.com>
2021-06-08usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct nameKishon Vijay Abraham I
Kernel device tree got updated to use clock name as "ref" instead of "usb2_refclk". Fix cdns3-ti.c to use the correct name. Fixes: 70e167495ab2 ("arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot") Fixes: 6239cc8c4e84 ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-05-16usb: dwc3-generic: Disable host driver definition if gadget onlyKunihiko Hayashi
Even if only USB gadget is defined, dwc3 generic driver enables a definition and probe/remove functions for host driver. This enables the definition if USB_HOST is enabled only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-05-16usb: musb-new: Extend and move Allwinner quirk into KconfigAndre Przywara
All newer Allwinner SoCs (since about 2013) miss the CONFIGDATA register in their MUSB implementation, so they need a quirk to hardcode this. Currently this quirk depends on listing the SoCs affected in musb_reg.h, which means that this list needs to grow with every new chip. Move the quirk feature into Kconfig, next to PIO_ONLY, and change the default to y (for Allwinner builds), while listing the early implementations as exceptions. This fixes USB peripheral operation on some newer SoCs, which were not explicitly listed before. Tested on H6, H616, R40 (which were broken before), and also on the H5 and A20, for regressions. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-05-14usb: dwc3-meson-g12a: skip phy on -ENODATA aswellNeil Armstrong
If the PHY isn't specified in the DT, -ENODATA means it should be skipped, handle it like -ENOENT. With that, devices without USB3 supported can have USB working (Odroid-HC4). Fixes: adb049abf7 ("usb: dwc3: Add Meson G12A USB Glue") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-28usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHYMarek Vasut
For systems which use generic PHY support and implement USB PHY driver, the parsing of PHY properties is unnecessary, disable it. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-22usb: ehci-hcd: Add IAA handshake for removing async QHYe Li
According to EHCI spec, software needs to do handshake with HC for safely removing QH from async list. This handshake is implemented by setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD register and poll the IAA (Interrupt on Async Advance bit) in the USB_USBSTS to ensure the HC has released all on-chip state that may potentially reference one of the data structures just removed. Current codes only check active status of the last QTD, but this can't ensure the QH is released from HC. We can meet unrecoverable "EHCI timed out on TD" errors when running UEFI SCT tests on USB disk. The USB_ASYNCLISTADDR register is changed to a invalid address when the issue happens. It is fixed after adding the IAA handshake. Steps to reproduce the issue: 1. Build the UEFI SCT from https://github.com/tianocore/edk2-test 2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2 3. Copy SCT files and Shell.efi to USB disk FAT partition 4. Load the Shell.efi from USB FAT, and run bootefi to execute it 5. After booting into Shell, enter the SCT directory and run "sct -a" to execute all tests. 6. Tests run about 1 hour and stop with many EHCI timeout errors like EHCI timed out on TD - token=0x801f8c80 Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-18usb: ehci-mx6: Add iMX8M supportMarek Vasut
The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Fix aarch64 build warningsMarek Vasut
Fix cast from pointer to integer of different size by casting the pointer to uintptr_t instead of uint32_t, the former has correct size on both 32bit and 64bit architectures. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Add fsl,imx7d-usb compatible stringMarek Vasut
Add new compatible string, used by some more up-to-date DTs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Set default CONFIG_MXC_USB_PORTSC if not definedMarek Vasut
There is now multiple copies of CONFIG_MXC_USB_PORTSC in configs set to PORT_PTS_UTMI | PORT_PTS_PTW, which is in fact the default register value for MX6, MX7 and MX7ULP. Define the default value of CONFIG_MXC_USB_PORTSC in the driver and use it in case CONFIG_MXC_USB_PORTSC is not defined in config, to reduce the duplication. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Add generic EHCI PHY supportMarek Vasut
In case PHY support is enabled, use the generic EHCI PHY support to start and stop the PHY. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Use portnr from DT in DM caseMarek Vasut
In case the platform uses DM, determine port number, which is used as offset in USBMISC registers, from PHY node DT aliases, just like Linux does. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18usb: ehci-mx6: Pass MISC address to usb_oc_config()Marek Vasut
Instead of passing ad-hoc sequence number to usb_oc_config(), pass in the USB MISC address itself. The USB MISC address comes from DT in DM case, and from the old method using controller index in non-DM case. Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 10:00:31 +0000