aboutsummaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2021-06-18ARM64: rockchip: evb_rk3399: add usb ohci definationsArtem Lapkin
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: Add rk3568 architecture coreJoseph Chen
RK3568 is a high-performance and low power quad-core application processor designed for personal mobile internet device and AIoT equipments. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rk3399_common: setup fdtoverlay_addr_r valueArtem Lapkin
fdtoverlay (pxe_utils) require define fdtoverlay_addr_r env variable for example sunxi-common.h meson64.h already have it. Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-17Merge tag 'u-boot-atmel-2021.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for the 2021.10 cycle: This feature set converts the boards pm9261 and pm9263 Ethernet support to DM; enables hash command for all SAM boards; fixes the NAND pmecc bit-flips correction; adds Falcon boot for sama5d3_xplained board; and other minor adjustments.
2021-06-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards - powerpc: Update Maintainers for some boards.
2021-06-17board: freescale: t208xrdb: add Linux fdt fix-ups for rev DCamelia Groza
The T2080RDB boards revisions D and up have updated 10G Aquantia PHYs connected to MAC1 and MAC2. The second Aquantia PHY is located at a different address on the MDIO bus compared to rev C (0x8 instead of 0x1). Fix-up the Linux device tree to update the PHY address for the second Aquantia PHY on boards revisions D and up. Also rename the PHY node to reflect the changes. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17pg-wcom-ls102xa: fix sys counter frequencyAleksandar Gerasimovski
A system clock of 66MHz was chosen for the pg-wcom-ls102xa. Compared to the Evalboard, this corresponds to a reduction of 1/3. The system counter clock should have been reduced accordingly, but that was not the case, so we had a system time that was 1/3 behind the real time. This patch corrects the system counter clock to 8.333MHz = 66.667MHz / 8. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km: ls102x: update device disable configuration acc hw design descAleksandar Gerasimovski
In order to improve power consumption ls102x allows to disable peripherals that are not in use. This patch follows SELI8 HW design description and disables peripherals that are not in use in our designs, the same configuration is applicable and for EXPU1. This patch uses available hwconfig option for updating ls102x device disable configuration. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km: ls102x: set ethrotate envvar to noAleksandar Gerasimovski
The default behavior in the latest u-boot revisions is to rotate the active net device to the next available if the requested link is not established. For our ls102x based devices this would mean that if active debug net device is not available, u-boot will rotate and set the next net device that is one of the estar adapters. To return from this situation manual action to set correct ethact adapter will be needed and this can be annoying when working in debug mode. Setting ethrotate=no will disable net adapter rotation and will make sure that the primary adapter is always used. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km: ls102xa: add missing define for PRAM regionsAleksandar Gerasimovski
In our designs we reserve PRAM area at the end of the RAM, and in order this area to be visible and taken into account by the u-boot memory mgmt CONFIG_PRAM has to be defined. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km/ls102xa: add support for u-boot POST memory testAleksandar Gerasimovski
From production view this is standard test executed during production on all linux based foxmc cards. On CENT2 HW defined memory region is zero means that some DDR accesses are done by memory_post_dataline and memory_post_addrline but pattern tests are skipped that's why mem_regions is fast there. On ls102x for the complete DDR region of 1GiB memory_regions_post_test takes approx. 4min and this is too much for production, so this patch defines only 1MiB region as compromise. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17board/km: add support for expu1 design based on nxpAleksandar Gerasimovski
The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33Yangbo Lu
Drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT is used instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Michael Walle <michael@walle.cc> [for kontron-sl28] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17board: freescale: p2041rdb: use correct EEPROM address lengthMatt Merhar
These boards, according to the schematic and per the board I own, use an M24256-BWDW6TP I2C EEPROM which requires two address bytes. This fixes the 'mac' command which is used to program, among other things, the MAC addresses for the ethernet interfaces on the board. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-16Merge tag 'u-boot-imx-20210616' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-16ls1012a: net: pfe: remove pfe stop from bootcmdMian Yousaf Kaukab
When using bootefi to boot a EFI binary, u-boot is supposed to provide networking service for EFI application. Currently, 'pfe stop' command is called from bootcmd before running bootefi. As a result network stops working for EFI applications and console is flooded with "Rx pkt not on expected port" messages. Implement board_quiesce_devices() for ls1012a boards and call pfe_command_stop() from it instead of calling 'pfe stop' from *_bootcmd and bootcmd. Tested-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> [Fixed checkpatch space error] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-14board: sama5d3_xplained: add Falcon boot supportMichael Opdenacker
This supports Falcon boot support for Microchip SAMA5D3 Xplained, tested on raw MMC, and on raw NAND. spl_start_uboot() is has the simplest possible implementation. It doesn't test the environment because enabling environment support currently causes the SPL to exceed its maximum size (64 KiB). It doesn't check the serial for incoming characters either because this functionality currently doesn't seem to work from the SPL on this board. Settings for Falcon boot from at FAT partition are also added to avoid compile failures when CONFIG_SPL_OS_BOOT is enabled, but this particular case is currently not functional as adding FAT and partition support cause the SPL to be too big again. Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
2021-06-10arm64: mvebu: correct Armada 8K addressesHeinrich Schuchardt
0x04000000- 0x06000000 is reserved memory. We cannot load to anything here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: configs: turris_mox: add fdtfile default env variableMarek Behún
Add default fdtfile environment variable with value marvell/armada-3720-turris-mox.dtb. This can be useful for some boot scenarios. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: add support for board rescue modeMarek Behún
Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-09Nokia RX-51: Enable CONFIG_WDT to remove deprecation warningPali Rohár
Also convert CONFIG_HW_WATCHDOG to CONFIG_WATCHDOG. Signed-off-by: Pali Roh?r <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210309201915.16586-1-pali@kernel.org
2021-06-09configs: am64: Enable configs to support USB host and device modesAswath Govindraju
Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-09configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy ↵Aswath Govindraju
the limitations for USB DFU boot mode For USB DFU boot mode there is a limitation on the load address of boot images that they have to be less than 0x70001000. Therefore, move the SPL_TEXT_BASE address to 0x70000000. Currently ATF is being loaded at 0x70000000, if the SPL is being loaded at 0x70000000 then ATF would overwrite SPL image when loaded. Therefore, move the location of ATF to a latter location in SRAM, past the SPL image. Also rearrange the EEPROM and BSS data on top of ATF. Given below is the placement of various data sections in SRAM ┌──────────────────────────────────────┐0x70000000 │ │ │ │ │ │ │ SPL IMAGE (Max size 1.5 MB) │ │ │ │ │ │ │ ├──────────────────────────────────────┤0x7017FFFF │ │ │ SPL STACK │ │ │ ├──────────────────────────────────────┤0x70192727 │ GLOBAL DATA(216 B) │ ├──────────────────────────────────────┤0x701927FF │ │ │ INITIAL HEAP (32 KB) │ │ │ ├──────────────────────────────────────┤0x7019A7FF │ │ │ BSS (20 KB) │ ├──────────────────────────────────────┤0x7019F7FF │ EEPROM DATA (2 KB) │ ├──────────────────────────────────────┤0x7019FFFF │ │ │ │ │ ATF (123 KB) │ │ │ │ │ ├──────────────────────────────────────┤0x701BEBFB │ BOOT PARAMETER INDEX TABLE (5124 B)│ ├──────────────────────────────────────┤0x701BFFFF │ │ │SYSFW FIREWALLED DUE TO A BUG (128 KB)│ │ │ ├──────────────────────────────────────┤0x701DFFFF │ │ │ DMSC CODE AREA (128 KB) │ │ │ └──────────────────────────────────────┘0x701FFFFF Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-9-a-govindraju@ti.com
2021-06-09mx7d: Add Storopack's SMEGW01 boardFabio Estevam
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09imx8mn: configs: add support for distro boot commandsAndrey Zhizhikin
Supported boot device types in iMX8MN: MMC, DHCP. Add DISTRO_DEFAULTS config option and include the distro boot command header file to enable full support of distro boot on i.MX8M Nano EVK (both DDR and LPDDR derivatives). Drop previous environment, which was targeting customized boot commands and boot order. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09imx: Add SeeedStudio NPI-IMX6ULL SupportNavin Sankar Velliangiri
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09imx: support for conga-QMX8 boardOliver Graute
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09imx: ventana: enable dm support for PCI and FEC ethernetTim Harvey
Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-09Add out4.ru O4-iMX-NANO boardOleh Kravchenko
Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09ARM: imx8m: verdin-imx8mm: Increase bootm size to 64 MiBMarek Vasut
Uncompressed aarch64 kernel Image are rather large, increase the bootm size limit to 64 MiB to cater for that. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-06-08usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and ↵Aswath Govindraju
CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-08net: convert TFTP_TSIZE to proper Kconfig optionTero Kristo
TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-04arm: mvebu: turris_omnia: support invoking rescue boot from consoleMarek Behún
Make it possible to invoke rescue boot from U-Boot console, without having to press the factory reset button. This is needed when accessing the device remotely, for example. Achieve this by putting rescue command into `bootcmd_rescue` default environment variable and setting some distroboot environment variables to their default values when the factory button is pressed. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-25MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck
Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-21configs: sama7g5ek: increase bootm lenEugen Hristev
Increase the BOOTM_LEN to 32M . This would allow a bigger kernel image to be booted, for example the multi_v7_defconfig. Loading Kernel Image Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover resetting ... Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-05-14riscv: Enable AI ram on K210Sean Anderson
We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-13board: pm9263: fix some typos in commentsIlko Iliev
Fix comment typos Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13board: pm9263: switch to use DM_ETHIlko Iliev
Enable CONFIG_DM_ETH in configs/pm9263_defconfig Drop legacy initialization in board/ronetix/pm9263.c Remove network related setting from include/configs/pm9263.h Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-13board: pm9261: remove network supportIlko Iliev
The network support is removed because there is no DM for Davicom DM9000. Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-12Merge tag 'ti-v2021.07-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ti - Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver
2021-05-12include: configs: Update env for selecting right dtbLokesh Vutla
Now that single defconfig can be used for booting AM64 EVM and SK, default device tree will not work for selecting dtb for kernel. Update the env to select right dtb based on eeprom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12include: configs: am64x_evm: Optimize size of SPL BSSLokesh Vutla
Current BSS allocation of SPL is as below: size spl/u-boot-spl text data bss dec hex filename 144572 5484 1752 151808 25100 spl/u-boot-spl But 20KB is allocated currently for BSS. Reduce it to 4KB and save some space for stack. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12include: configs: am64x: Avoid overlap of BSS and stack areaLokesh Vutla
Avoid R5 SPL stack writing into ROM index table. Re-use the same space for storing EEPROM data. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12board: ti: am64x: Add board support for am64x evmDave Gerlach
Add board specific initialization for am64x based boards. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-02ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CMIlko Iliev
Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02imx: Add support for Ronetix's iMX7-CM boardIlko Iliev
Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)Ying-Chun Liu (PaulLiu)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 20:12:08 +0000