aboutsummaryrefslogtreecommitdiff
path: root/include/phy.h
AgeCommit message (Collapse)Author
2024-06-13net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbolMarek Vasut
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol. This removes one more configuration headers option finalizes its Kconfig symbol conversion. No functional change expected. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-06-13net: phy: Turn default auto-negotiation timeout into Kconfig symbolMarek Vasut
Let users configure default auto-negotiation timeout via Kconfig instead of specifying it in board configuration headers. This is the first step toward converting this to Kconfig fully, so far the legacy PHY_ANEG_TIMEOUT in configuration headers takes precedence. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-03-26net: phy: Factor out PHY GPIO reset codeMarek Vasut
Pull the PHY GPIO reset code into separate function, since this is and will be reused multiple times. Set up default reset assert and deassert timing to generous 20ms and 1ms for maximum compatibility in case those DT properties are missing. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-03-07net: mdio: Handle bus level GPIO ResetRoger Quadros
Some platforms have bus level Reset controlled by a GPIO line. If available then handle bus reset via GPIO. Signed-off-by: Roger Quadros <rogerq@kernel.org>
2024-02-08net: phy: nxp-c45-tja11xx: use local definion of featuresRadu Pirea (NXP OSS)
Use a local definition for the PHY features. PHY_100BT1_FEATURES are not defined using the 100BaseT1 bit, so keep this workaround in the driver. Signed-off-by: "Radu Pirea (NXP OSS)" <radu-nicolae.pirea@oss.nxp.com>
2023-09-14net: phy: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-06-10net: phy: Unpublish phy_connect_dev()Marek Vasut
The phy_connect_dev() is legacy API, now that there are no users, make it internal to phy.c and unpublish it from headers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05net: phy: Make phy_interface_is_rgmii a switch statementNishanth Menon
Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes with Linux") reordered the enum definitions. This exposed a problem in range checking functions to identify the interface type. Though this specific api wasn't impacted (all the RGMII definitions remained within range), this experience should be used to never to have to face this kind of challenge again. While it is possible for the phy drivers to use the enums directly, drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc use this api. Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05net: phy: Drop phy_interface_is_sgmiiNishanth Menon
Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes with Linux") reordered the enum definitions. This caused the range of enums that this api was checking to go bad. There aren't anymore users of phy_interface_is_sgmii, so, just drop it. Also the protocols are so very different that it makes no sense to provide a helper wrapper in the hope of reuse for phy drivers. Reported-by: Tom Rini <trini@konsulko.com> Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Suggested-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/all/20230414103852.38705065@dellmb/ Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Add phy_read_mmd_poll_timeout() from LinuxMarek Vasut
Add phy_read_mmd_poll_timeout() from Linux 5.7.y as of commit bd971ff0b7392 ("net: phy: introduce phy_read_mmd_poll_timeout macro") This is used by the upcoming Marvell 10G PHY driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Add phy_modify_mmd() and phy_modify_mmd_changed() from LinuxMarek Vasut
Add phy_modify_mmd()/phy_modify_mmd_changed() from Linux 5.1.y as of commit b8554d4f7288f ("net: phy: add register modifying helpers returning 1 on change") This is used by the upcoming Marvell 10G PHY driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Drop unused phy_register()Marek Vasut
This function is no longer used, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Drop static phy_drivers listMarek Vasut
The static phy_drivers list is superseded by linker list of struct phy_drivers now that all drivers have been converted to the later. Drop the phy_drivers list as well as list_head from struct phy_driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: gen10g: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: xilinx-gmii2rgmii: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ncsi: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: fixed: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: mscc: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: intel-xway: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: xilinx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: vitesse: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ti: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" This particular PHY driver is slightly more spread out across additional source files. Since the phy_register() calls are no longer necessary, all the registration calls across those source files is dropped. Furthermore, the Makefile can now be updated to only compile generic TI PHY support if matching Kconfig symbol is enabled and the ifdeffery in the generic TI PHY driver can be dropped. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: teranetics: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: smsc: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: realtek: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: nxp-tja11xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: nxp-c45-tja11xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: natsemi: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: meson-gxl: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ksz90x1: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ksz8xxx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: marvell: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: lxt: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: et1011c: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: mv88e61xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: davicom: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: cortina: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ca_phy: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: broadcom: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: b53: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: atheros: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: aquantia: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: adin: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Iterate over both registered PHYs and struct phy_driver linker listMarek Vasut
Introduce U_BOOT_PHY_DRIVER() macro which is used to add struct phy_driver into a new linker list section containing all compiled in struct phy_driver drivers. This is so far empty until PHY drivers are converted over to this macro. Iterate over both drivers registered using soon to be legacy phy_register() as well as drivers in the new linker list when looking up a suitable PHY driver. This way, PHY drivers can be converted over to the new macro one driver at a time. The relocation of callbacks for linker list based drivers now happens in phy_init() call as the drivers are available at that point in time, and phy_register() is not called for those drivers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2022-12-07net: phy: Remove non-DM_ETH codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-28phy: add driver for Intel XWAY PHYTim Harvey
Add a driver for the Intel XWAY GbE PHY: - configure RGMII using dt phy-mode and standard delay properties - use genphy_config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-10-21net: NC-SI setup and handlingSamuel Mendoza-Jonas
Add the handling of NC-SI ethernet frames, and add a check at the start of net_loop() to configure NC-SI before starting other network commands. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-08net: phy: Remove inline definitions from convinience functionsRamon Fried
The convinience functions are not that small and they caused bloated text segments because of their usage. There was no need to inline them in the first place, as they're not part of a fastpath. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-15Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-netTom Rini
- DM9000 DM support - tftp server bug fix - mdio ofnode support functions - Various phy fixes and improvements. [trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c drivers/net/phy/phy.c include/phy.h]
2022-04-12net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driverMichael Trimarchi
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:14:58 +0000