aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-06-10arm: mvebu: configs: turris_mox: add fdtfile default env variableMarek Behún
Add default fdtfile environment variable with value marvell/armada-3720-turris-mox.dtb. This can be useful for some boot scenarios. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: add support for board rescue modeMarek Behún
Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04arm: mvebu: turris_omnia: support invoking rescue boot from consoleMarek Behún
Make it possible to invoke rescue boot from U-Boot console, without having to press the factory reset button. This is needed when accessing the device remotely, for example. Achieve this by putting rescue command into `bootcmd_rescue` default environment variable and setting some distroboot environment variables to their default values when the factory button is pressed. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-31riscv: dts: add fu740 supportGreen Wan
Add dts support for fu740. The HiFive Unmatched support is based on fu740 cpu and drivers in following patch set. Signed-off-by: Green Wan <green.wan@sifive.com> [greentime.hu: set fu740 speed to 1.2GHz] Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-28efi_loader: add PE/COFF image measurementMasahisa Kojima
"TCG PC Client Platform Firmware Profile Specification" requires to measure every attempt to load and execute a OS Loader(a UEFI application) into PCR[4]. This commit adds the PE/COFF image measurement, extends PCR, and appends measurement into Event Log. Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Replace CONFIG_HASH_CALCULATE by CONFIG_HASH Fix conversions between pointers and u64. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-05-27Merge tag 'ti-v2021.07-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ti - Fix reset for AM64 platforms - Enable networking PHY driver for AM64 - Fix default R5F cluster setting in J7
2021-05-27ARM: ti: Increase the allocated size for MLO.rawFaiz Abbas
MLO has increased to a size greater than the allocated 128 kB in dfu_alt_info_emmc and _mmc. Therefore, double the allocated size for MLO.raw in the default environment. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210419065027.5834-1-a-govindraju@ti.com
2021-05-26test: Remove duplicate macroSean Anderson
ut_asserteq_strn is defined twice. Remove one definition. Fixes: 33d7edfd5f ("test: Add a way to check part of a console line or skip it") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-25MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck
Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-24sandbox: errno: avoid conflict with libc's errnoMarek Behún
When building with LTO, the system libc's `errno` variable used in arch/sandbox/cpu/os.c conflicts with U-Boot's `errno` (defined in lib/errno.c) with the following error: .../ld: errno@@GLIBC_PRIVATE: TLS definition in /lib64/libc.so.6 section .tbss mismatches non-TLS reference in /tmp/u-boot.EQlEXz.ltrans0.ltrans.o To avoid this conflict use different asm label for this variable when CONFIG_SANDBOX is enabled. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24efi_loader: add macro for const EFI runtime dataMarek Behún
Add macro __efi_runtime_rodata, for const variables with similar purpose as those using __efi_runtime_data. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-24efi_loader: add Sphinx doc for __efi_runtime and __efi_runtime_dataMarek Behún
Document the macros __efi_runtime and __efi_runtime_data in Sphinx style. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-24efi_loader: fix warning when linking with LTOMarek Behún
When linking with LTO, the compiler complains about type mismatch of variables `__efi_runtime_start`, `__efi_runtime_stop`, `__efi_runtime_rel_start` and `__efi_runtime_rel_stop`: include/efi_loader.h:218:21: warning: type of ‘__efi_runtime_start’ does not match original declaration [-Wlto-type-mismatch] 218 | extern unsigned int __efi_runtime_start, __efi_runtime_stop; | ^ arch/sandbox/lib/sections.c:7:6: note: ‘__efi_runtime_start’ was previously declared here 7 | char __efi_runtime_start[0] __attribute__((section(".__efi_run | ^ Change the type to char[] in include/efi_loader.h. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24compiler.h: align the __ADDRESSABLE macro with Linux' versionMarek Behún
Use UNIQUE_ID in the __ADDRESSABLE macro. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20phy: introduce 1000BaseX and 2500BaseX modesStefan Chulski
Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-19arm64: zynqmp: Add pinctrl descriptionMichal Simek
ZynqMP pinctrl Linux driver has been merged to 5.13-rc1 kernel. Based on it DT files can be extended by pinctrl configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-14riscv: Enable AI ram on K210Sean Anderson
We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-14clk: k210: Remove k210_register_pllSean Anderson
This simplifies the PLL creation process, since we don't have to pass all the parameters individually. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-05-13w1: replace dt detection by automatic detectionKory Maincent
This patch changes the functioning of the detection of w1 devices. The old way was a comparison between detected w1 and the ones described in the device tree. Now it will just look for the driver matching the family id of the w1 detected. The patch is inspired from Maxime Ripard code. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
2021-05-13cmd: add support for a new "extension" commandKory Maincent
This patch adds a new "extension" command, which aims at detecting extension boards connected to the hardware platform, and apply the Device Tree overlays that describe the hardware present on those extension boards. In order to enable this mechanism, board-specific code must implement the extension_board_scan() function that fills in a linked list of "struct extension", each describing one extension board. In addition, the board-specific code must select the SUPPORT_EXTENSION_SCAN Kconfig boolean. Based on this: - "extension scan" makes the generic code call the board-specific extension_board_scan() function to retrieve the list of detected extension boards. - "extension list" allows to list the detected extension boards. - "extension apply <number>|all" allows to apply the Device Tree overlay(s) corresponding to one, or all, extension boards The latter requires two environment variables to exist and set one variable to run: - extension_overlay_addr: the RAM address where to load the Device Tree overlays - extension_overlay_cmd: the U-Boot command to load one overlay. Indeed, the location and mechanism to load DT overlays is very setup specific. - extension_overlay_name: set by the command: the name of the DT which will be load during the execution. When calling the command described in the extension_overlay_cmd variable, the variable extension_overlay_name will be defined. So a typical extension_overlay_cmd will look like this: extension_overlay_cmd=load mmc 0:1 $extension_overlay_addr /boot/$extension_overlay_name Here is an example on how to use it: => run loadfdt => fdt addr $fdtaddr => setenv extension_overlay_addr 0x1000 => setenv extension_overlay_cmd 'load mmc 0:1 ${extension_overlay_addr} /boot/${extension_overlay_name}' => extension scan Found 1 extension board(s). => extension apply 0 519 bytes read in 3 ms (168.9 KiB/s) Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
2021-05-13fdt_support: move fdt_valid from cmd_fdt.c to fdt_support.cKory Maincent
Move the fdt_valid function to fdt_support. This changes allow to be able to test the validity of a devicetree in other c files. Update code syntax. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
2021-05-12Merge tag 'ti-v2021.07-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ti - Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver
2021-05-12soc: ti: k3-navss-ringacc: Remove unused ring modesVignesh Raghavendra
With AM64x supporting only K3_NAV_RINGACC_RING_MODE_RING or the exposed ring mode, all other K3 SoCs have also been moved to this common baseline. Therefore drop other modes such as K3_NAV_RINGACC_RING_MODE_MESSAGE (and proxy) to save on SPL footprint. There is a saving of ~800 bytes with this change for am65x_evm_r5_defconfig. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2021-05-12soc: ti: k3-navss-ringacc: Add AM64 ringacc supportVignesh Raghavendra
AM64 dual mode rings are modeled as pair of Rings objects which has common configuration and memory buffer, but separate real-time control register sets for each direction mem2dev (forward) and dev2mem (reverse). AM64 rings must be requested only using k3_ringacc_request_rings_pair(), and forward ring must always be initialized/configured. After this any other Ringacc APIs can be used without any callers changes. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-05-12firmware: ti_sci: Update ti_sci_cmd_rm_udmap_tx_ch_cfg() API to the latestVignesh Raghavendra
Update struct ti_sci_msg_rm_udmap_tx_ch_cfg_req to latest ABI to support AM64x BCDMA Block copy channels. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-05-12include: configs: Update env for selecting right dtbLokesh Vutla
Now that single defconfig can be used for booting AM64 EVM and SK, default device tree will not work for selecting dtb for kernel. Update the env to select right dtb based on eeprom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12include: configs: am64x_evm: Optimize size of SPL BSSLokesh Vutla
Current BSS allocation of SPL is as below: size spl/u-boot-spl text data bss dec hex filename 144572 5484 1752 151808 25100 spl/u-boot-spl But 20KB is allocated currently for BSS. Reduce it to 4KB and save some space for stack. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12include: configs: am64x: Avoid overlap of BSS and stack areaLokesh Vutla
Avoid R5 SPL stack writing into ROM index table. Re-use the same space for storing EEPROM data. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64Dave Gerlach
Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12board: ti: am64x: Add board support for am64x evmDave Gerlach
Add board specific initialization for am64x based boards. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2021-05-12Revert "fdt: translate address if #size-cells = <0>"Dario Binacchi
This reverts commit d64b9cdcd475eb7f07b49741ded87e24dae4a5fc. As pointed by [1] and [2], the reverted patch made every DT 'reg' property translatable. What the patch was trying to fix was fixed in a different way from previously submitted patches which instead of correcting the generic address translation function fixed the issue with appropriate platform code. [1] https://patchwork.ozlabs.org/project/uboot/patch/1614324949-61314-1-git-send-email-bmeng.cn@gmail.com/ [2] https://lore.kernel.org/linux-clk/20210402192054.7934-1-dariobin@libero.it/T/ Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-11Merge tag 'u-boot-imx-20210502' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210502 ------------------- - mx6: fixes for Ventana - local fixes from maintainer - imx7d: Ronetix's iMX7-CM - imx8: Ronetix iMX8MQ-CM Engicam i.Core MX8M Compulab iot-gate-imx8 - Fixes i.MX8 documentation - Fixes phy usage with fec
2021-05-04fdt_support.c: Allow late kernel cmdline modificationNiko Mauno
By declaring board-specific board_fdt_chosen_bootargs() the kernel command line arguments can be adjusted before injecting to flat dt chosen node. Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
2021-05-04env: allow environment to be amended from control dtbRasmus Villemoes
It can be useful to use the same U-Boot binary for multiple purposes, say the normal one, one for developers that allow breaking into the U-Boot shell, and one for use during bootstrapping which runs a special-purpose bootcmd. Or one can have several board variants that can share almost all boot logic, but just needs a few tweaks in the variables used by the boot script. To that end, allow the control dtb to contain a /config/enviroment node (or whatever one puts in fdt_env_path variable), whose property/value pairs are used to update the run-time environment after it has been loaded from its persistent location. The indirection via fdt_env_path is for maximum flexibility - for example, should the user wish (or board logic dictate) that the values in the DTB should no longer be applied, one simply needs to delete the fdt_env_path variable; that can even be done automatically by including a fdt_env_path = ""; property in the DTB node. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2021-05-04sysinfo: Require that sysinfo_detect be called before other methodsSean Anderson
This has the uclass enforce calling detect() before other methods. This allows drivers to cache information in detect() and perform (cheaper) retrieval in the other accessors. This also modifies the only instance where this sequencing was not followed. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-02ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CMIlko Iliev
Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02imx: Add support for Ronetix's iMX7-CM boardIlko Iliev
Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)Ying-Chun Liu (PaulLiu)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02pci: pci-uclass: Add board_pci_fixup_dev for DM_PCITim Harvey
Add a board_pci_fixup_dev weak function to allow PCI device fixups during enumeration. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02include: configs: ge: avoid shell on boot failureIan Ray
Prevent shell access on boot failure by entering an infinite loop. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02include: configs: ge: simplify default boot commandIan Ray
Minor cosmetic changes to unify `CONFIG_EXTRA_ENV_SETTINGS' indentation between Bx50v3 and PPD to make comparison and review easier and simplify the default boot command. Signed-off-by: Ian Ray Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02include: configs: ge: bx50v3: drop USB bootIan Ray
Remove unsupported USB boot. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-04-29Merge tag 'dm-pull-29apr21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm buildman environment fix binman FMAP improvements minor test improvements and fixes minor dm improvements
2021-04-29Merge tag 'xilinx-for-v2021.07-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
2021-04-29tpm: missing event typesHeinrich Schuchardt
Add a reference for the TPM event types and provide missing constants. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-04-29dm: core: Add size operations on device tree referencesChen Guanqiao
Add functions to add size of addresses in the device tree using ofnode references. If the size is not set, return FDT_SIZE_T_NONE. Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29phy: marvell: add support for SFI1Igal Liberman
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 01:36:36 +0000