| Age | Commit message (Collapse) | Author |
|---|
|
Mattijs Korpershoek <mkorpershoek@baylibre.com> says:
Android boot flow is a bit different than a regular Linux distro.
Android relies on multiple partitions in order to boot.
A typical boot flow would be:
1. Parse the Bootloader Control Block (BCB, misc partition)
2. If BCB requested bootonce-bootloader, start fastboot and wait.
3. If BCB requested recovery or normal android, run the following:
a. Get slot (A/B) from BCB
b. Run AVB (Android Verified Boot) on boot partitions
c. Load boot and vendor_boot partitions
d. Load device-tree, ramdisk and boot
The AOSP documentation has more details at [1], [2], [3]
This has been implemented via complex boot scripts such as [4].
However, these boot script are neither very maintainable nor generic.
Moreover, DISTRO_DEFAULTS is being deprecated [5].
Add a generic Android bootflow implementation for bootstd.
For this initial version, only boot image v4 is supported.
This has been tested on sandbox using:
$ ./test/py/test.py --bd sandbox --build -k test_ut
This has also been tested on the AM62X SK EVM using TI's Android SDK[6]
To test on TI board, the following (WIP) patch is needed as well:
https://gitlab.baylibre.com/baylibre/ti/ti-u-boot/-/commit/84cceb912bccd7cdd7f9dd69bca0e5d987a1fd04
[1] https://source.android.com/docs/core/architecture/bootloader
[2] https://source.android.com/docs/core/architecture/partitions
[3] https://source.android.com/docs/core/architecture/partitions/generic-boot
[4] https://source.denx.de/u-boot/u-boot/-/blob/master/include/configs/meson64_android.h
[5] https://lore.kernel.org/r/all/20230914165615.1058529-17-sjg@chromium.org/
[6] https://software-dl.ti.com/processor-sdk-android/esd/AM62X/09_02_00/docs/android/Overview.html
|
|
Rasmus Villemoes <rasmus.villemoes@prevas.dk> says:
This is a followup to the patches that landed in 2024.01 and nearly
made sure that source files for producing .dtbo files use the .dtso
extension. In the same release, a few new .dts files snuck in, and
there was also some test code involving .dtbo -> .dtbo.S -> .dtbo.o I
didn't really know how to handle at the time. This should finish the
job, bring us in sync with linux (at least in this respect), and drop
the .dts -> .dtbo build rule.
|
|
Add a unit test for testing the Android bootmethod.
This requires another mmc image (mmc7) to contain the following partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
- vendor_boot_a: contains a fake vendor_boot image
Also add BOOTMETH_ANDROID as a dependency on sandbox so that we can test
this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc7.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit
81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources, and eventually
eliminating all .dts -> .dtbo instances.
This also matches the documentation update done in commit 4fb7e570d6b.
Cc: Masahisa Kojima <kojima.masahisa@socionext.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
|
|
The tests we currently have expect the firmware update to fail
when OsIndications is not set properly. However, we have a Kconfig flag
that explicitly ignores that variable. Adjust the tests accordingly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The build option to support images of type 'IMAGE_FORMAT_LEGACY' is
CONFIG_LEGACY_IMAGE_FORMAT so update the pytest to check for the correct
option.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
On tests which require "tftpboot" we need to depend not on cmd_net but
rather cmd_tftpboot. And on tests which require cmd_pxe we do not need
to also depend on cmd_net as this should be handled already via Kconfig
logic.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The current test doesn't check anything about the output. If a bug
results in junk before the output, this is not currently detected.
Add a check for the first line being the one expected.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When a driver is not registered properly it is not clear which one it
is. Adjust test_dm_compat() to show this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This setting pads out the function names. Adjust the test to handle
this, since some boards use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Tests for standard boot need disks to be set up, which can only be done
on sandbox, since adjusting disks on real hardware is not currently
supported. Mark the init function as sandbox-only.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The relocation offset can change in some initcall sequences. Handle
this and make sure it is used for all debugging statements in
init_run_list()
Update the trace test to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Some versions of trace-cmd (or some machines?) show one less dot in the
CPU list.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Prepare v2024.07-rc5
|
|
Add tests for booting image using tftpboot/pxe boot commands, tftpboot
boot case loads the FIT image into DDR and boots using bootm command
whereas pxe boot cases downloads the pxe configuration file from the
TFTP server and interprets it to boot the images mentioned in the pxe
configurations file.
This test relies on boardenv_* containing configuration values including
the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
boot log pattern value is matched. For example, if the parameter
'pattern' is defined as 'login:', it will boot till login prompt.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Tested-by: Tom Rini <trini@konsulko.com>
|
|
According to UEFI v2.10 spec section 8.2.6, if a caller invokes the
SetVariables() service, it will produce a digest from hash(VariableName,
VendorGuid, Attributes, TimeStamp, DataNew_variable_content), then the
firmware that implements the SetVariable() service will compare the
digest with the result of applying the signer’s public key to the
signature. For EFI variable append write, efitools sign-efi-sig-list has
an option "-a" to add EFI_VARIABLE_APPEND_WRITE attr, and u-boot will
drop this attribute in efi_set_variable_int(). So if a caller uses
"sign-efi-sig-list -a" to create the authenticated variable, this append
write will fail in the u-boot due to "hash check failed".
This patch resumes writing the EFI_VARIABLE_APPEND_WRITE attr to ensure
that the hash check is correct. And also update the "test_efi_secboot"
test case to compliance with the change.
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
|
|
For pcr_read and pcr_extend commands allow the digest algorithm to be
specified by an additional argument. If not specified it will default to
SHA256 for backwards compatibility.
Additionally update test_tpm2.py for the changes in output in pcr_read
which now shows the algo and algo length in the output.
A follow-on to this could be to extend all PCR banks with the detected
algo when the <digest_algo> argument is 'auto'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The image is not unloaded if a security violation occurs.
If efi_set_load_options() fails, we do not free the memory allocated for
the optional data. We do not unload the image.
* Unload the image if a security violation occurs.
* Free load_options if efi_set_load_options() fails.
* Unload the image if efi_set_load_options() fails.
Fixes: 53f6a5aa8626 ("efi_loader: Replace config option for initrd loading")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add read/write tests for optee_rpmb cmd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Fix typos in test_eficonfig.py: %s/curren/current/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
|
|
Using uclass_get_name() reduces the code size.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Currently, all the capsules for the sandbox platform are generated at
the time of running the capsule tests. To showcase generation of
capsules through binman, generate all raw(non FIT payload) capsules
needed for the sandbox platform as part of the build. This acts as an
illustrative example for generating capsules as part of a platform's
build.
Make corresponding change in the capsule test's configuration to get
these capsules from the build directory.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
|
|
Add a test for reset commands which performs resetting of CPU, It does
COLD reset by default and WARM reset with -w option.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add test case for saveenv command in non-JTAG bootmode which saves the
u-boot environment variables in persistent storage.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-3-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add test cases to verify the different type of secure boot images loaded
at DDR location for AMD's ZynqMP SoC. It also adds tests authentication
and decryption functionality using AES and RSA features for Zynq.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add gpio pins generic test for the set of gpio pin list to test various
gpio related functionality, such as the input, set, clear, and toggle,
it also tests the input and output functionality for shorted gpio pins.
This test depends on boardenv* configuration to define gpio pins names.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Provide a unit test for the smbios command.
Provide different test functions for QEMU, sandbox, and other systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add test cases for bootstage command to print the bootstage report, to
stash the data into memory and to unstash the data from memory.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
With commit 42c0e5bb054d ("test: Find leftovers after clean/mrproper")
we assume that we are performing out of tree builds. test_clean and
test_mrproper fail if the assumption isn't met.
However there are valid scenarios where tests run with in source builds
(i.e., test.py --build-dir=.).
Automatically skip cleanup tests in such scenarios to prevent false
positives.
Signed-off-by: Tobias Deiminger <tdmg@linutronix.de>
Reviewed-by: Harald Seiler <u-boot@rahix.de>
|
|
In practice, as this test defaults to enabled rather than disabled, too
many platforms now fail.
This reverts commit d8364738623ff47dd2321dd68da310abb58fe861.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
With newer versions of trace-cmd the report subcommand will have
different output from before if we do or do not pass -l. However, with
the -l flag passed our put is consistent here. This updates our regular
expressions and comments for this as well now.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add the following memory tests:
memtest_negative - To test mtest command by providing incorrect inputs
memtest_ddr - To test memory write-read-comparision for DDR memory
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add below test cases for i2c commands:
i2c_bus - To show i2c bus info,
i2c_dev - To set or show the current bus,
i2c_probe - To probe the i2c device,
i2c_eeprom - To test i2c eeprom device,
i2c_probe_all_buses - To list down all the buses and probes it
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add below test cases for mii commands:
mii_info -To display MII PHY info
mii_list - To list MII devices
mii_set_device - To set MII device
mii_read - To reads register from MII PHY address
mii_dump - To display data from MII PHY address
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Add below test cases for mdio commands:
mdio_list - To list MDIO buses
mdio_read - To read PHY's register at <devad>.<reg>
mdio_write - To write PHY's register at <devad>.<reg>
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Maxim Uvarov <maxim.uvarov@linaro.org> says:
Add small net fixes prior lwip patches.
|
|
Printing net list is useful in CI log files.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Verifies shell variables are replaced by their values.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
5804ebfeb1ce ("test: hush: Test hush if/else") translated this test to a C test,
so this python file is no more needed.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Commit 51bb33846ad2 ("bootm: Support string substitution in
bootargs") introduced a feature of bootargs string substitution
and changed a flag used in bootm_process_cmdline_env() call
to be either true or false. With this flag value,
condition in bootm_process_cmdline()
`if (flags & BOOTM_CL_SUBST)` is never true
and process_subst() is never called.
Add a simple test to verify if substitution works OK.
Signed-off-by: Piotr Kubik <piotr.kubik@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Recently pylint has started to complain about:
No name 'fs_helper' in module 'tests' (no-name-in-module)
Due to:
from tests import fs_helper
However, we have:
test/py/tests/fs_helper.py
And since we do not want to add a dummy test/py/tests/__init__.py to
silence this warning we instead just disable it as needed.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
