| Age | Commit message (Collapse) | Author |
|---|
|
Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Drop the now-unused Python 2 code to keep code coverage at 100%.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update this test to use Python 3 to meet the 2020 deadline.
Also make it executable while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update this test to use Python 3 to meet the 2020 deadline.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Since the state module holds references to all the device trees used by
binman, it must be updated when the device trees are updated. Add support
for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present EnsureCompiled() uses an file from the 'output' directory (in
the tools module) when compiling the device tree. This is fine in most
cases, allowing useful inspection of the output files from binman.
However in functional tests, _SetupDtb() creates an output directory and
immediately removes it afterwards. This serves no benefit and just
confuses things, since the 'official' output directory is supposed to be
created and destroyed in control.Binman().
Add a new parameter for the optional temporary directory to use, and use a
separate temporary directory in _SetupDtb().
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function currently fails if the root node is requested. Requesting
the root node is sometimes useful, so fix the bug.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is confusing when something goes wrong with a device tree which was
created from data rather than a file, since there is no identifying
filename. Add an option to provide this. Use the filename as the name,
where available
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present a Python exception is raised which does not show the node
information. Add a more helpful exception in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present 'dtoc -t' return a success code even if some of the tests fail.
Fix this by checking the test result and setting the exit code. This
allows 'make qcheck' to function as expected.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The only change needed is to update get_value() to support the 'bytes'
type correctly with Python 3.
With this the dtoc unit tests pass with both Python 2 and 3:
PYTHONPATH=/tmp/b/sandbox_spl/scripts/dtc/pylibfdt python \
./tools/dtoc/dtoc -t
PYTHONPATH=~/cosarm/dtc/pylibfdt:tools/patman python3 \
./tools/dtoc/dtoc -t
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Since we are now using the bytes type in Python 3, the conversion in
fdt32_to_cpu() is not necessary, so drop it.
Also use 'int' instead of 'long' to convert the integer value, since
'long' is not present in Python 3.
With this, test_fdt passes with both Python 2 and 3:
PYTHONPATH=/tmp/b/sandbox_spl/scripts/dtc/pylibfdt python \
./tools/dtoc/test_fdt -t
PYTHONPATH=~/cosarm/dtc/pylibfdt:tools/patman python3 \
./tools/dtoc/test_fdt -t
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a simple unit test for one of the cases of this function, so that any
fault can be seen directly, rather than appearing through the failure of
another test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present this test does not check the upper 32 bits of the returned
value. Add some additional tests to cover this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The .dtb files are binary so we should open them as binary files. This
allows Python 3 to use the correct 'bytes' type.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update this class to work correctly on Python 3 and to pass its unit
tests. The only required change is to deal with a difference in the
behaviour of sorting with a None value.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update this class to work correctly on Python 3 and to pass its unit
tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In Python 3 bytes and str are separate types. Use bytes to ensure that
the code functions correctly with Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The difference between the bytes and str types in Python 3 requires a
number of minor changes to this function. Update it to handle the input
data using the 'bytes' type. Create two useful helper functions which can
be used by other modules too.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This method does not actually use any members of the Prop class. Move it
out of the class so that it is easier to add unit tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use this helper function which works on both Python 2 and Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the order of struct field emitted by this tool depends on the
internal workings of a Python dictionary. Sort the fields to remove this
uncertainty, so that tests are deterministic.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update a few things in this tool so that they support Python 3:
- print statements
- iteritems()
- xrange()
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix an open() statement to use binary mode, so that it works as expected
with Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
generate define for an alias only if the struct is not
created already.
This prevents compilerwarning:
PLAT spl/dts/dt-platdata.o
spl/dts/dt-platdata.c:11:46: error: missing braces around initializer [-Werror=missing-braces]
static const struct dtd_simple_bus dtv_ahb = {
^
spl/dts/dt-platdata.c:20:46: error: missing braces around initializer [-Werror=missing-braces]
static const struct dtd_simple_bus dtv_apb = {
^
cc1: all warnings being treated as errors
on the at91 based taurus board. Reason is in at91sam9260.dtsi
is defined:
ahb {
compatible = "simple-bus";
ranges;
and later:
pinctrl: pinctrl@fffff400 {
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x600>;
without this patch dtoc generates:
struct dtd_atmel_at91rm9200_pinctrl {
fdt32_t atmel_mux_mask[6];
fdt32_t ranges[3];
fdt32_t reg[6];
};
struct dtd_simple_bus {
bool ranges;
};
"#define dtd_simple_bus dtd_atmel_at91rm9200_pinctrl"
and the line with "define dtd_simple_bus..." introduces
the warning. This define is not needed.
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
The dtoc tests need to be adapted to dtoc being changed to output platdata
structs as const, which has been introduced in commit 7d05d3a8e35f ("dtoc:
make generated platdata structs const").
Fixes: 7d05d3a8e35f ("dtoc: make generated platdata structs const")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
|
|
The platdata initialization structs are currently generated into .rwdata.
Make sure the are put into .rodata by generating them as const.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This does not set the correct value at present. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the tests run one after the other using a single CPU. This is
not very efficient. Bring in the concurrencytest module and run the tests
concurrently, using one process for each CPU by default. A -P option
allows this to be overridden, which is necessary for code-coverage to
function correctly.
This requires fixing a few tests which are currently not fully
independent.
At some point we might consider doing this across all pytests in U-Boot.
There is a pytest version that supports specifying the number of processes
to use, but it did not work for me.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There are a few test cases which print output. Suppress this so that tests
can run silently in the normal case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present 'make check' leaves some temporary directories around. Part of
this is because we call tools.PrepareOutputDir() twice in some cases,
without calling tools.FinaliseOutputDir() in between.
Fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This module is often available in the sandbox_spl build created by
'make check'. Use this as a default path so that just typing 'binman -t'
(without setting PYTHONPATH) will generally run the tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Support creating an Fdt object without having to write the data to a file
first.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a few more functions which allow creating and modifying property
values. If only we could do this so easily in the real world.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a way to add new nodes and sync them back to the blob.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This should be big endian, since that is what device tree uses. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present we require the caller to manually update the device tree using
individual calls to libfdt functions. This is not ideal. It would be
better if we could make changes using the Python structure and then call a
Sync() function to write them back.
Add this feature to the Fdt class. Update binman and the tests to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The enhanced pylibfdt support in U-Boot needed for binman was a
placeholder while upstreaming of this work continued. This is now
complete, so bring in the changes and update the tools as needed.
There are quite a few changes since we decided to split the
implementation into three fdt classes instead of two.
The Fdt.del_node() method was unfortunately missed in this process and
will be dealt with later. It exists in U-Boot but not upstream.
Further syncing of libfdt probably needs to wait until we assess the
code-size impact of all the new checking code on SPL and possibly provide
a way to disable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a function which can decode a property containing a list of phandles.
This is useful for finding nodes linked to a property. Also provide a way
to look up a single phandle and get the Fdt object from a Node.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is useful for clients that want to find a node. Export it so it can
be used by others.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is sometimes useful to have an area of the image which is all zeroes,
or all 0xff. This can often be achieved by padding the size of an an
existing entry and setting the pad byte for an entry or image.
But it is useful to have an explicit means of adding blocks of repeating
data to the image. Add a 'fill' entry type to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sometimes it is useful to pass binman the value of an entry property from
the command line. For example some entries need access to files and it is
not always convenient to put these filenames in the image definition
(device tree).
Add a -a option which can be used like this:
-a<prop>=<value>
where
<prop> is the property to set
<value> is the value to set it to
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This module has a few missing comments. Add them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a few simple functions to add a placeholder integer property, and
set its value.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present some warnings are printed to indicate failures which are a
known part of running the tests. Suppress these.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add more tests to increase dtoc code coverage to 100%.
Correct a whitespace error in some test .dts files at the same time.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a -T option to run a code-coverage test on dtoc. At present this is
about 96%. Future work will increase it to 100%.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix some comments and a printf string which is incorrect.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present a property with a single phandle looks like an integer value
to dtoc. Correct this by adjusting it in the phandle-processing code.
Add a test for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the algortihm is not correct since it will return the root node
if the requested node is not found and there are no slashes in the
requested node name. Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
