1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
// SPDX-License-Identifier: GPL-2.0+
/*
* ARM Cortex M3/M4/M7 SysTick timer driver
* (C) Copyright 2017 Renesas Electronics Europe Ltd
*
* Based on arch/arm/mach-stm32/stm32f1/timer.c
* (C) Copyright 2015
* Kamil Lulko, <kamil.lulko@gmail.com>
*
* Copyright 2015 ATS Advanced Telematics Systems GmbH
* Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
*
* The SysTick timer is a 24-bit count down timer. The clock can be either the
* CPU clock or a reference clock. Since the timer will wrap around very quickly
* when using the CPU clock, and we do not handle the timer interrupts, it is
* expected that this driver is only ever used with a slow reference clock.
*
* The number of reference clock ticks that correspond to 10ms is normally
* defined in the SysTick Calibration register's TENMS field. However, on some
* devices this is wrong, so this driver allows the clock rate to be defined
* using CFG_SYS_HZ_CLOCK.
*/
#include <config.h>
#include <init.h>
#include <time.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
/* SysTick Base Address - fixed for all Cortex M3, M4 and M7 devices */
#define SYSTICK_BASE 0xE000E010
struct cm3_systick {
uint32_t ctrl;
uint32_t reload_val;
uint32_t current_val;
uint32_t calibration;
};
#define TIMER_MAX_VAL 0x00FFFFFF
#define SYSTICK_CTRL_EN BIT(0)
/* Clock source: 0 = Ref clock, 1 = CPU clock */
#define SYSTICK_CTRL_CPU_CLK BIT(2)
#define SYSTICK_CAL_NOREF BIT(31)
#define SYSTICK_CAL_SKEW BIT(30)
#define SYSTICK_CAL_TENMS_MASK 0x00FFFFFF
/* read the 24-bit timer */
static ulong read_timer(void)
{
struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
/* The timer counts down, therefore convert to an incrementing timer */
return TIMER_MAX_VAL - readl(&systick->current_val);
}
int timer_init(void)
{
struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
u32 cal;
writel(TIMER_MAX_VAL, &systick->reload_val);
/* Any write to current_val reg clears it to 0 */
writel(0, &systick->current_val);
cal = readl(&systick->calibration);
if (cal & SYSTICK_CAL_NOREF)
/* Use CPU clock, no interrupts */
writel(SYSTICK_CTRL_EN | SYSTICK_CTRL_CPU_CLK, &systick->ctrl);
else
/* Use external clock, no interrupts */
writel(SYSTICK_CTRL_EN, &systick->ctrl);
/*
* If the TENMS field is inexact or wrong, specify the clock rate using
* CFG_SYS_HZ_CLOCK.
*/
#if defined(CFG_SYS_HZ_CLOCK)
gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK;
#else
gd->arch.timer_rate_hz = (cal & SYSTICK_CAL_TENMS_MASK) * 100;
#endif
gd->arch.tbl = 0;
gd->arch.tbu = 0;
gd->arch.lastinc = read_timer();
return 0;
}
/* return milli-seconds timer value */
ulong get_timer(ulong base)
{
unsigned long long t = get_ticks() * 1000;
return (ulong)((t / gd->arch.timer_rate_hz)) - base;
}
unsigned long long get_ticks(void)
{
u32 now = read_timer();
if (now >= gd->arch.lastinc)
gd->arch.tbl += (now - gd->arch.lastinc);
else
gd->arch.tbl += (TIMER_MAX_VAL - gd->arch.lastinc) + now;
gd->arch.lastinc = now;
return gd->arch.tbl;
}
ulong get_tbclk(void)
{
return gd->arch.timer_rate_hz;
}
|
