1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
|
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Startup Code for MIPS32 CPU-core
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*/
#include <asm-offsets.h>
#include <config.h>
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#ifndef CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
CONFIG_SYS_INIT_SP_OFFSET)
#endif
#ifdef CONFIG_32BIT
# define MIPS_RELOC 3
# define STATUS_SET 0
#endif
#ifdef CONFIG_64BIT
# ifdef CONFIG_SYS_LITTLE_ENDIAN
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
(((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
# else
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
# endif
# define MIPS_RELOC MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
# define STATUS_SET ST0_KX
#endif
.set noreorder
.macro init_wr sel
MTC0 zero, CP0_WATCHLO,\sel
mtc0 t1, CP0_WATCHHI,\sel
mfc0 t0, CP0_WATCHHI,\sel
bgez t0, wr_done
nop
.endm
.macro uhi_mips_exception
move k0, t9 # preserve t9 in k0
move k1, a0 # preserve a0 in k1
li t9, 15 # UHI exception operation
li a0, 0 # Use hard register context
sdbbp 1 # Invoke UHI operation
.endm
.macro setup_stack_gd
li t0, -16
PTR_LI t1, CONFIG_SYS_INIT_SP_ADDR
and sp, t1, t0 # force 16 byte alignment
PTR_SUBU \
sp, sp, GD_SIZE # reserve space for gd
and sp, sp, t0 # force 16 byte alignment
move k0, sp # save gd pointer
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_SUBU \
sp, sp, t2 # reserve space for early malloc
and sp, sp, t0 # force 16 byte alignment
#endif
move fp, sp
/* Clear gd */
move t0, k0
1:
PTR_S zero, 0(t0)
blt t0, t1, 1b
PTR_ADDIU t0, PTRSIZE
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
#endif
.endm
ENTRY(_start)
/* U-Boot entry point */
b reset
mtc0 zero, CP0_COUNT # clear cp0 count for most accurate boot timing
#if defined(CONFIG_SYS_XWAY_EBU_BOOTCFG)
/*
* Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to
* access external NOR flashes. If the board boots from NOR flash the
* internal BootROM does a blind read at address 0xB0000010 to read the
* initial configuration for that EBU in order to access the flash
* device with correct parameters. This config option is board-specific.
*/
.org 0x10
.word CONFIG_SYS_XWAY_EBU_BOOTCFG
.word 0x0
#endif
#if defined(CONFIG_MALTA)
/*
* Linux expects the Board ID here.
*/
.org 0x10
.word 0x00000420 # 0x420 (Malta Board with CoreLV)
.word 0x00000000
#endif
#if defined(CONFIG_ROM_EXCEPTION_VECTORS)
/*
* Exception vector entry points. When running from ROM, an exception
* cannot be handled. Halt execution and transfer control to debugger,
* if one is attached.
*/
.org 0x200
/* TLB refill, 32 bit task */
uhi_mips_exception
.org 0x280
/* XTLB refill, 64 bit task */
uhi_mips_exception
.org 0x300
/* Cache error exception */
uhi_mips_exception
.org 0x380
/* General exception */
uhi_mips_exception
.org 0x400
/* Catch interrupt exceptions */
uhi_mips_exception
.org 0x480
/* EJTAG debug exception */
1: b 1b
nop
.org 0x500
#endif
reset:
#if __mips_isa_rev >= 6
mfc0 t0, CP0_CONFIG, 5
and t0, t0, MIPS_CONF5_VP
beqz t0, 1f
nop
b 2f
mfc0 t0, CP0_GLOBALNUMBER
#endif
#ifdef CONFIG_ARCH_BMIPS
1: mfc0 t0, CP0_DIAGNOSTIC, 3
and t0, t0, (1 << 31)
#else
1: mfc0 t0, CP0_EBASE
and t0, t0, EBASE_CPUNUM
#endif
/* Hang if this isn't the first CPU in the system */
2: beqz t0, 4f
nop
3: wait
b 3b
nop
/* Init CP0 Status */
4: mfc0 t0, CP0_STATUS
and t0, ST0_IMPL
or t0, ST0_BEV | ST0_ERL | STATUS_SET
mtc0 t0, CP0_STATUS
/*
* Check whether CP0 Config1 is implemented. If not continue
* with legacy Watch register initialization.
*/
mfc0 t0, CP0_CONFIG
bgez t0, wr_legacy
nop
/*
* Check WR bit in CP0 Config1 to determine if Watch registers
* are implemented.
*/
mfc0 t0, CP0_CONFIG, 1
andi t0, (1 << 3)
beqz t0, wr_done
nop
/* Clear Watch Status bits and disable watch exceptions */
li t1, 0x7 # Clear I, R and W conditions
init_wr 0
init_wr 1
init_wr 2
init_wr 3
init_wr 4
init_wr 5
init_wr 6
init_wr 7
b wr_done
nop
wr_legacy:
MTC0 zero, CP0_WATCHLO
mtc0 zero, CP0_WATCHHI
wr_done:
/* Clear WP, IV and SW interrupts */
mtc0 zero, CP0_CAUSE
/* Clear timer interrupt (CP0_COUNT cleared on branch to 'reset') */
mtc0 zero, CP0_COMPARE
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
mfc0 t0, CP0_CONFIG
and t0, t0, MIPS_CONF_IMPL
or t0, t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
ehb
#endif
#ifdef CONFIG_MIPS_CM
PTR_LA t9, mips_cm_map
jalr t9
nop
#endif
#ifdef CONFIG_MIPS_INIT_STACK_IN_SRAM
/* Set up initial stack and global data */
setup_stack_gd
# ifdef CONFIG_DEBUG_UART
/* Earliest point to set up debug uart */
PTR_LA t9, debug_uart_init
jalr t9
nop
# endif
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
# ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* Initialize any external memory */
PTR_LA t9, lowlevel_init
jalr t9
nop
# endif
/* Initialize caches... */
PTR_LA t9, mips_cache_reset
jalr t9
nop
# ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* Initialize any external memory */
PTR_LA t9, lowlevel_init
jalr t9
nop
# endif
#endif
#ifndef CONFIG_MIPS_INIT_STACK_IN_SRAM
/* Set up initial stack and global data */
setup_stack_gd
# ifdef CONFIG_DEBUG_UART
/* Earliest point to set up debug uart */
PTR_LA t9, debug_uart_init
jalr t9
nop
# endif
#endif
move a0, zero # a0 <-- boot_flags = 0
PTR_LA t9, board_init_f
jr t9
move ra, zero
END(_start)
|
