path: root/arch/powerpc/cpu/ppc4xx/tlb.c

/*
 * (C) Copyright 2007
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+ 
 */

#include <common.h>

#if defined(CONFIG_440)

#include <asm/ppc440.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/mmu.h>

typedef struct region {
	u64 base;
	u32 size;
	u32 tlb_word2_i_value;
} region_t;

void remove_tlb(u32 vaddr, u32 size)
{
	int i;
	u32 tlb_word0_value;
	u32 tlb_vaddr;
	u32 tlb_size = 0;

	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
		tlb_word0_value = mftlb1(i);
		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
		    (tlb_vaddr >= vaddr)) {
			/*
			 * TLB is enabled and start address is lower or equal
			 * than the area we are looking for. Now we only have
			 * to check the size/end address for a match.
			 */
			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
			case TLB_WORD0_SIZE_1KB:
				tlb_size = 1 << 10;
				break;
			case TLB_WORD0_SIZE_4KB:
				tlb_size = 4 << 10;
				break;
			case TLB_WORD0_SIZE_16KB:
				tlb_size = 16 << 10;
				break;
			case TLB_WORD0_SIZE_64KB:
				tlb_size = 64 << 10;
				break;
			case TLB_WORD0_SIZE_256KB:
				tlb_size = 256 << 10;
				break;
			case TLB_WORD0_SIZE_1MB:
				tlb_size = 1 << 20;
				break;
			case TLB_WORD0_SIZE_16MB:
				tlb_size = 16 << 20;
				break;
			case TLB_WORD0_SIZE_256MB:
				tlb_size = 256 << 20;
				break;
			}

			/*
			 * Now check the end-address if it's in the range
			 */
			if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
				/*
				 * Found a TLB in the range.
				 * Disable it by writing 0 to tlb0 word.
				 */
				mttlb1(i, 0);
		}
	}

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");
}

/*
 * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
 * This function is used to either turn cache on or off in a specific
 * memory area.
 */
void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
{
	int i;
	u32 tlb_word0_value;
	u32 tlb_word2_value;
	u32 tlb_vaddr;
	u32 tlb_size = 0;

	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
		tlb_word0_value = mftlb1(i);
		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
		    (tlb_vaddr >= vaddr)) {
			/*
			 * TLB is enabled and start address is lower or equal
			 * than the area we are looking for. Now we only have
			 * to check the size/end address for a match.
			 */
			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
			case TLB_WORD0_SIZE_1KB:
				tlb_size = 1 << 10;
				break;
			case TLB_WORD0_SIZE_4KB:
				tlb_size = 4 << 10;
				break;
			case TLB_WORD0_SIZE_16KB:
				tlb_size = 16 << 10;
				break;
			case TLB_WORD0_SIZE_64KB:
				tlb_size = 64 << 10;
				break;
			case TLB_WORD0_SIZE_256KB:
				tlb_size = 256 << 10;
				break;
			case TLB_WORD0_SIZE_1MB:
				tlb_size = 1 << 20;
				break;
			case TLB_WORD0_SIZE_16MB:
				tlb_size = 16 << 20;
				break;
			case TLB_WORD0_SIZE_256MB:
				tlb_size = 256 << 20;
				break;
			}

			/*
			 * Now check the end-address if it's in the range
			 */
			if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
			    ((tlb_vaddr < (vaddr + size - 1)) &&
			     ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
				/*
				 * Found a TLB in the range.
				 * Change cache attribute in tlb2 word.
				 */
				tlb_word2_value =
					TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
					TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
					TLB_WORD2_W_DISABLE | tlb_word2_i_value |
					TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
					TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
					TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
					TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
					TLB_WORD2_SR_ENABLE;

				/*
				 * Now either flush or invalidate the dcache
				 */
				if (tlb_word2_i_value)
					flush_dcache();
				else
					invalidate_dcache();

				mttlb3(i, tlb_word2_value);
				asm("iccci 0,0");
			}
		}
	}

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");
}

static int add_tlb_entry(u64 phys_addr,
			 u32 virt_addr,
			 u32 tlb_word0_size_value,
			 u32 tlb_word2_i_value)
{
	int i;
	unsigned long tlb_word0_value;
	unsigned long tlb_word1_value;
	unsigned long tlb_word2_value;

	/* First, find the index of a TLB entry not being used */
	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
		tlb_word0_value = mftlb1(i);
		if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
			break;
	}
	if (i >= PPC4XX_TLB_SIZE)
		return -1;

	/* Second, create the TLB entry */
	tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
		TLB_WORD0_TS_0 | tlb_word0_size_value;
	tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
		TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
	tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
		TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
		TLB_WORD2_W_DISABLE | tlb_word2_i_value |
		TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
		TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
		TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
		TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
		TLB_WORD2_SR_ENABLE;

	/* Wait for all memory accesses to complete */
	sync();

	/* Third, add the TLB entries */
	mttlb1(i, tlb_word0_value);
	mttlb2(i, tlb_word1_value);
	mttlb3(i, tlb_word2_value);

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");

	return 0;
}

static void program_tlb_addr(u64 phys_addr,
			     u32 virt_addr,
			     u32 mem_size,
			     u32 tlb_word2_i_value)
{
	int rc;
	int tlb_i;

	tlb_i = tlb_word2_i_value;
	while (mem_size != 0) {
		rc = 0;
		/* Add the TLB entries in to map the region. */
		if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
		    (mem_size >= TLB_256MB_SIZE)) {
			/* Add a 256MB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
				mem_size -= TLB_256MB_SIZE;
				phys_addr += TLB_256MB_SIZE;
				virt_addr += TLB_256MB_SIZE;
			}
		} else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_16MB_SIZE)) {
			/* Add a 16MB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
				mem_size -= TLB_16MB_SIZE;
				phys_addr += TLB_16MB_SIZE;
				virt_addr += TLB_16MB_SIZE;
			}
		} else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_1MB_SIZE)) {
			/* Add a 1MB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
				mem_size -= TLB_1MB_SIZE;
				phys_addr += TLB_1MB_SIZE;
				virt_addr += TLB_1MB_SIZE;
			}
		} else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_256KB_SIZE)) {
			/* Add a 256KB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
				mem_size -= TLB_256KB_SIZE;
				phys_addr += TLB_256KB_SIZE;
				virt_addr += TLB_256KB_SIZE;
			}
		} else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_64KB_SIZE)) {
			/* Add a 64KB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
				mem_size -= TLB_64KB_SIZE;
				phys_addr += TLB_64KB_SIZE;
				virt_addr += TLB_64KB_SIZE;
			}
		} else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_16KB_SIZE)) {
			/* Add a 16KB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
				mem_size -= TLB_16KB_SIZE;
				phys_addr += TLB_16KB_SIZE;
				virt_addr += TLB_16KB_SIZE;
			}
		} else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_4KB_SIZE)) {
			/* Add a 4KB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
				mem_size -= TLB_4KB_SIZE;
				phys_addr += TLB_4KB_SIZE;
				virt_addr += TLB_4KB_SIZE;
			}
		} else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
			   (mem_size >= TLB_1KB_SIZE)) {
			/* Add a 1KB TLB entry */
			if ((rc = add_tlb_entry(phys_addr, virt_addr,
						TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
				mem_size -= TLB_1KB_SIZE;
				phys_addr += TLB_1KB_SIZE;
				virt_addr += TLB_1KB_SIZE;
			}
		} else {
			printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
				phys_addr);
		}

		if (rc != 0)
			printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
				phys_addr);
	}

	return;
}

/*
 * Program one (or multiple) TLB entries for one memory region
 *
 * Common usage for boards with SDRAM DIMM modules to dynamically
 * configure the TLB's for the SDRAM
 */
void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
{
	region_t region_array;

	region_array.base = phys_addr;
	region_array.size = size;
	region_array.tlb_word2_i_value = tlb_word2_i_value;	/* en-/disable cache */

	/* Call the routine to add in the tlb entries for the memory regions */
	program_tlb_addr(region_array.base, virt_addr, region_array.size,
			 region_array.tlb_word2_i_value);

	return;
}

#endif /* CONFIG_440 */