1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
|
// SPDX-License-Identifier: GPL-2.0+
/*
*
* Copyright (C) 2015 Phil Sutter <phil@nwl.cc>
*/
#include <common.h>
#include <miiphy.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <linux/mbus.h>
#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
#include "../arch/arm/mach-mvebu/serdes/axp/board_env_spec.h"
DECLARE_GLOBAL_DATA_PTR;
/* GPP and MPP settings as found in mvBoardEnvSpec.c of Synology's U-Boot */
#define DS414_GPP_OUT_VAL_LOW (BIT(25) | BIT(30))
#define DS414_GPP_OUT_VAL_MID (BIT(10) | BIT(15))
#define DS414_GPP_OUT_VAL_HIGH (0)
#define DS414_GPP_OUT_POL_LOW (0)
#define DS414_GPP_OUT_POL_MID (0)
#define DS414_GPP_OUT_POL_HIGH (0)
#define DS414_GPP_OUT_ENA_LOW (~(BIT(25) | BIT(30)))
#define DS414_GPP_OUT_ENA_MID (~(BIT(10) | BIT(12) | \
BIT(13) | BIT(14) | BIT(15)))
#define DS414_GPP_OUT_ENA_HIGH (~0)
static const u32 ds414_mpp_control[] = {
0x11111111,
0x22221111,
0x22222222,
0x00000000,
0x11110000,
0x00004000,
0x00000000,
0x00000000,
0x00000000
};
/* DDR3 static MC configuration */
/* 1G_v1 (4x2Gbits) adapted by DS414 */
MV_DRAM_MC_INIT syno_ddr3_b0_667_1g_v1[MV_MAX_DDR3_STATIC_SIZE] = {
{0x00001400, 0x73014A28}, /*DDR SDRAM Configuration Register */
{0x00001404, 0x30000800}, /*Dunit Control Low Register */
{0x00001408, 0x44148887}, /*DDR SDRAM Timing (Low) Register */
{0x0000140C, 0x3AD83FEA}, /*DDR SDRAM Timing (High) Register */
{0x00001410, 0x14000000}, /*DDR SDRAM Address Control Register */
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0000F3FF}, /*Dunit Control High Register */
{0x00001428, 0x000F8830}, /*Dunit Control High Register */
{0x0000142C, 0x054C36F4}, /*Dunit Control High Register */
{0x0000147C, 0x0000C671},
{0x000014a0, 0x00000001},
{0x000014a8, 0x00000100}, /*2:1 */
{0x00020220, 0x00000006},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000001}, /*DDR Dunit ODT Control Register */
{0x000014C0, 0x192424C9}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0x0AAA24C9}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence*/
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x3FFFFFE1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
{0x00001538, 0x00000009}, /*Read Data Sample Delays Register */
{0x0000153C, 0x00000009}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000650}, /*MR0 */
{0x000015D4, 0x00000044}, /*MR1 */
{0x000015D8, 0x00000010}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQC Configuration Register */
{0x000015EC, 0xF800A225}, /*DDR PHY */
{0x0, 0x0}
};
MV_DRAM_MODES ds414_ddr_modes[MV_DDR3_MODES_NUMBER] = {
{"ds414_1333-667", 0x3, 0x5, 0x0, A0, syno_ddr3_b0_667_1g_v1, NULL},
};
extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
MV_BIN_SERDES_CFG ds414_serdes_cfg[] = {
{ MV_PEX_ROOT_COMPLEX, 0x02011111, 0x00000000,
{ PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_DISABLED,
PEX_BUS_DISABLED },
0x0040, serdes_change_m_phy
}
};
MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
{
return &ds414_ddr_modes[0];
}
MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode)
{
return &ds414_serdes_cfg[0];
}
u8 board_sat_r_get(u8 dev_num, u8 reg)
{
return (0x1 << 1 | 1);
}
int board_early_init_f(void)
{
int i;
/* Set GPP Out value */
reg_write(GPP_DATA_OUT_REG(0), DS414_GPP_OUT_VAL_LOW);
reg_write(GPP_DATA_OUT_REG(1), DS414_GPP_OUT_VAL_MID);
reg_write(GPP_DATA_OUT_REG(2), DS414_GPP_OUT_VAL_HIGH);
/* set GPP polarity */
reg_write(GPP_DATA_IN_POL_REG(0), DS414_GPP_OUT_POL_LOW);
reg_write(GPP_DATA_IN_POL_REG(1), DS414_GPP_OUT_POL_MID);
reg_write(GPP_DATA_IN_POL_REG(2), DS414_GPP_OUT_POL_HIGH);
/* Set GPP Out Enable */
reg_write(GPP_DATA_OUT_EN_REG(0), DS414_GPP_OUT_ENA_LOW);
reg_write(GPP_DATA_OUT_EN_REG(1), DS414_GPP_OUT_ENA_MID);
reg_write(GPP_DATA_OUT_EN_REG(2), DS414_GPP_OUT_ENA_HIGH);
for (i = 0; i < ARRAY_SIZE(ds414_mpp_control); i++)
reg_write(MPP_CONTROL_REG(i), ds414_mpp_control[i]);
return 0;
}
int board_init(void)
{
u32 pwr_mng_ctrl_reg;
/* Adress of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
/* Gate unused clocks
*
* Note: Disabling unused PCIe lanes will hang PCI bus scan.
* Once this is resolved, bits 10-12, 26 and 27 can be
* unset here as well.
*/
pwr_mng_ctrl_reg = reg_read(POWER_MNG_CTRL_REG);
pwr_mng_ctrl_reg &= ~(BIT(0)); /* Audio */
pwr_mng_ctrl_reg &= ~(BIT(1) | BIT(2)); /* GE3, GE2 */
pwr_mng_ctrl_reg &= ~(BIT(14) | BIT(15)); /* SATA0 link and core */
pwr_mng_ctrl_reg &= ~(BIT(16)); /* LCD */
pwr_mng_ctrl_reg &= ~(BIT(17)); /* SDIO */
pwr_mng_ctrl_reg &= ~(BIT(19) | BIT(20)); /* USB1 and USB2 */
pwr_mng_ctrl_reg &= ~(BIT(29) | BIT(30)); /* SATA1 link and core */
reg_write(POWER_MNG_CTRL_REG, pwr_mng_ctrl_reg);
return 0;
}
int checkboard(void)
{
puts("Board: DS414\n");
return 0;
}
|
