1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
|
/*
* Copyright (C) 2014, Barco (www.barco.com)
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <i2c.h>
#include <miiphy.h>
#include "platinum.h"
#define GPIO_IP_NCONFIG IMX_GPIO_NR(5, 18)
#define GPIO_HK_NCONFIG IMX_GPIO_NR(7, 13)
#define GPIO_LS_NCONFIG IMX_GPIO_NR(5, 19)
#define GPIO_I2C0_SEL0 IMX_GPIO_NR(5, 2)
#define GPIO_I2C0_SEL1 IMX_GPIO_NR(1, 11)
#define GPIO_I2C0_ENBN IMX_GPIO_NR(1, 13)
#define GPIO_I2C2_SEL0 IMX_GPIO_NR(1, 17)
#define GPIO_I2C2_SEL1 IMX_GPIO_NR(1, 20)
#define GPIO_I2C2_ENBN IMX_GPIO_NR(1, 14)
#define GPIO_USB_RESET IMX_GPIO_NR(1, 5)
iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK),
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS),
};
iomux_v3_cfg_t const ecspi2_pads[] = {
MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK),
MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(ECSPI_PAD_SS),
};
iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
/* PHY nRESET */
iomux_v3_cfg_t const phy_reset_pad = {
MX6_PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart5_pads[] = {
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const i2c0_mux_pads[] = {
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
iomux_v3_cfg_t const i2c2_mux_pads[] = {
MX6_PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
struct i2c_pads_info i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL,
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL,
.gp = IMX_GPIO_NR(5, 27)
},
.sda = {
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
.gp = IMX_GPIO_NR(5, 26)
}
};
struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL,
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
/*
* This enet related pin-muxing and GPIO handling is done
* in SPL U-Boot. For early initialization. And to give the
* PHY some time to come out of reset before the U-Boot
* ethernet driver tries to access its registers via MDIO.
*/
int platinum_setup_enet(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
unsigned phy_reset = IMX_GPIO_NR(1, 19);
/* First configure PHY reset GPIO pin */
imx_iomux_v3_setup_pad(phy_reset_pad);
/* Reconfigure enet muxing while PHY is in reset */
gpio_direction_output(phy_reset, 0);
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
mdelay(10);
gpio_set_value(phy_reset, 1);
udelay(100);
/* set GPIO_16 as ENET_REF_CLK_OUT */
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
return enable_fec_anatop_clock(0, ENET_50MHZ);
}
int platinum_setup_i2c(void)
{
imx_iomux_v3_setup_multiple_pads(i2c0_mux_pads,
ARRAY_SIZE(i2c0_mux_pads));
imx_iomux_v3_setup_multiple_pads(i2c2_mux_pads,
ARRAY_SIZE(i2c2_mux_pads));
mdelay(10);
/* Disable i2c mux 0 */
gpio_direction_output(GPIO_I2C0_SEL0, 0);
gpio_direction_output(GPIO_I2C0_SEL1, 0);
gpio_direction_output(GPIO_I2C0_ENBN, 1);
/* Disable i2c mux 1 */
gpio_direction_output(GPIO_I2C2_SEL0, 0);
gpio_direction_output(GPIO_I2C2_SEL1, 0);
gpio_direction_output(GPIO_I2C2_ENBN, 1);
udelay(10);
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
/* Disable all leds */
i2c_set_bus_num(0);
i2c_reg_write(0x60, 0x05, 0x55);
return 0;
}
int platinum_setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads));
return 0;
}
int platinum_setup_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
return 0;
}
int platinum_phy_config(struct phy_device *phydev)
{
/* Use generic infrastructure, no specific setup */
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
int platinum_init_gpio(void)
{
/* Reset FPGA's */
gpio_direction_output(GPIO_IP_NCONFIG, 0);
gpio_direction_output(GPIO_HK_NCONFIG, 0);
gpio_direction_output(GPIO_LS_NCONFIG, 0);
udelay(3);
gpio_set_value(GPIO_IP_NCONFIG, 1);
gpio_set_value(GPIO_HK_NCONFIG, 1);
gpio_set_value(GPIO_LS_NCONFIG, 1);
/* no dmd configuration yet */
return 0;
}
int platinum_init_usb(void)
{
/* Reset usb hub */
gpio_direction_output(GPIO_USB_RESET, 0);
udelay(100);
gpio_set_value(GPIO_USB_RESET, 1);
return 0;
}
int platinum_init_finished(void)
{
/* Enable led 0 */
i2c_set_bus_num(0);
i2c_reg_write(0x60, 0x05, 0x54);
return 0;
}
|
