1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
|
/*
* Simple serial driver for Cogent motherboard serial ports
* for use during boot
*/
#include <common.h>
#include <board/cogent/serial.h>
#include <serial.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
#if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
(defined(CONFIG_8260) && defined(CONFIG_CONS_NONE))
#if CONFIG_CONS_INDEX == 1
#define CMA_MB_SERIAL_BASE CMA_MB_SERIALA_BASE
#elif CONFIG_CONS_INDEX == 2
#define CMA_MB_SERIAL_BASE CMA_MB_SERIALB_BASE
#elif CONFIG_CONS_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SERIAL_BASE CMA_MB_SER2A_BASE
#elif CONFIG_CONS_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SERIAL_BASE CMA_MB_SER2B_BASE
#else
#error CONFIG_CONS_INDEX must be configured for Cogent motherboard serial
#endif
static int cogent_serial_init(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */
serial_setbrg ();
cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */
cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
return (0);
}
static void cogent_serial_setbrg(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
unsigned int divisor;
unsigned char lcr;
if ((divisor = br_to_div (gd->baudrate)) == 0)
divisor = DEFDIV;
lcr = cma_mb_reg_read (&mbsp->ser_lcr);
cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80); /* Access baud rate(set DLAB) */
cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
cma_mb_reg_write (&mbsp->ser_lcr, lcr); /* unset DLAB */
}
static void cogent_serial_putc(const char c)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
if (c == '\n')
serial_putc ('\r');
while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
cma_mb_reg_write (&mbsp->ser_thr, c);
}
static void cogent_serial_puts(const char *s)
{
while (*s != '\0')
serial_putc (*s++);
}
static int cogent_serial_getc(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
}
static int cogent_serial_tstc(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0);
}
static struct serial_device cogent_serial_drv = {
.name = "cogent_serial",
.start = cogent_serial_init,
.stop = NULL,
.setbrg = cogent_serial_setbrg,
.putc = cogent_serial_putc,
.puts = cogent_serial_puts,
.getc = cogent_serial_getc,
.tstc = cogent_serial_tstc,
};
void cogent_serial_initialize(void)
{
serial_register(&cogent_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &cogent_serial_drv;
}
#endif /* CONS_NONE */
#if defined(CONFIG_CMD_KGDB) && \
defined(CONFIG_KGDB_NONE)
#if CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
#error Console and kgdb are on the same serial port - this is not supported
#endif
#if CONFIG_KGDB_INDEX == 1
#define CMA_MB_KGDB_SER_BASE CMA_MB_SERIALA_BASE
#elif CONFIG_KGDB_INDEX == 2
#define CMA_MB_KGDB_SER_BASE CMA_MB_SERIALB_BASE
#elif CONFIG_KGDB_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_KGDB_SER_BASE CMA_MB_SER2A_BASE
#elif CONFIG_KGDB_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_KGDB_SER_BASE CMA_MB_SER2B_BASE
#else
#error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial
#endif
void kgdb_serial_init (void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
unsigned int divisor;
if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0)
divisor = DEFDIV;
cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */
cma_mb_reg_write (&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB) */
cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */
cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
printf ("[on cma10x serial port B] ");
}
void putDebugChar (int c)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
cma_mb_reg_write (&mbsp->ser_thr, c & 0xff);
}
void putDebugStr (const char *str)
{
while (*str != '\0') {
if (*str == '\n')
putDebugChar ('\r');
putDebugChar (*str++);
}
}
int getDebugChar (void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
}
void kgdb_interruptible (int yes)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
if (yes == 1) {
printf ("kgdb: turning serial ints on\n");
cma_mb_reg_write (&mbsp->ser_ier, 0xf);
} else {
printf ("kgdb: turning serial ints off\n");
cma_mb_reg_write (&mbsp->ser_ier, 0x0);
}
}
#endif /* KGDB && KGDB_NONE */
#endif /* CAPS & SERPAR */
|
