1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/*
* Miscelaneous DaVinci functions.
*
* Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
* Copyright (C) 2004 Texas Instruments.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include "misc.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return(0);
}
#else
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(volatile void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
#endif
#ifdef CONFIG_DRIVER_TI_EMAC
/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
* Returns 1 if found, 0 otherwise.
*/
int dvevm_read_mac_address(uint8_t *buf)
{
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
/* Read MAC address. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
(uint8_t *) &buf[0], 6))
goto i2cerr;
/* Check that MAC address is valid. */
if (!is_valid_ether_addr(buf))
goto err;
return 1; /* Found */
i2cerr:
printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
err:
#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
return 0;
}
/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
uint8_t env_enetaddr[6];
eth_getenv_enetaddr_by_index(0, env_enetaddr);
if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
/* There is no MAC address in the environment, so we initialize
* it from the value in the EEPROM. */
debug("### Setting environment from EEPROM MAC address = "
"\"%pM\"\n",
env_enetaddr);
eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
}
#endif /* DAVINCI_EMAC */
/*
* Change the setting of a pin multiplexer field.
*
* Takes an array of pinmux settings similar to:
*
* struct pinmux_config uart_pins[] = {
* { &davinci_syscfg_regs->pinmux[8], 2, 7 },
* { &davinci_syscfg_regs->pinmux[9], 2, 0 }
* };
*
* Stepping through the array, each pinmux[n] register has the given value
* set in the pin mux field specified.
*
* The number of pins in the array must be passed (ARRAY_SIZE can provide
* this value conveniently).
*
* Returns 0 if all field numbers and values are in the correct range,
* else returns -1.
*/
int davinci_configure_pin_mux(const struct pinmux_config *pins,
const int n_pins)
{
int i;
/* check for invalid pinmux values */
for (i = 0; i < n_pins; i++) {
if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
(pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
return -1;
}
/* configure the pinmuxes */
for (i = 0; i < n_pins; i++) {
const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
const unsigned int value = pins[i].value << offset;
const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
const dv_reg *mux = pins[i].mux;
writel(value | (readl(mux) & (~mask)), mux);
}
return 0;
}
/*
* Configure multiple pinmux resources.
*
* Takes an pinmux_resource array of pinmux_config and pin counts:
*
* const struct pinmux_resource pinmuxes[] = {
* PINMUX_ITEM(uart_pins),
* PINMUX_ITEM(i2c_pins),
* };
*
* The number of items in the array must be passed (ARRAY_SIZE can provide
* this value conveniently).
*
* Each item entry is configured in the defined order. If configuration
* of any item fails, -1 is returned and none of the following items are
* configured. On success, 0 is returned.
*/
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
const int n_items)
{
int i;
for (i = 0; i < n_items; i++) {
if (davinci_configure_pin_mux(item[i].pins,
item[i].n_pins) != 0)
return -1;
}
return 0;
}
|
