1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
|
/*
* (C) Copyright 2006 DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/pxa-regs.h>
DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
.macro wait time
ldr r2, =OSCR
mov r3, #0
str r3, [r2]
0:
ldr r3, [r2]
cmp r3, \time
bls 0b
.endm
.globl lowlevel_init
lowlevel_init:
/* Set up GPIO pins first */
mov r10, lr
/* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */
ldr r0, =GPIO97
ldr r1, =0x801
str r1, [r0]
ldr r0, =GPIO98
ldr r1, =0x801
str r1, [r0]
/* tebrandt - ASCR, clear the RDH bit */
ldr r0, =ASCR
ldr r1, [r0]
bic r1, r1, #0x80000000
str r1, [r0]
mem_init:
/* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */
ldr r0, =ACCR
ldr r1, [r0]
orr r1, r1, #0x3000
str r1, [r0]
ldr r1, [r0]
/* 2. Programm MDCNFG, leaving DMCEN de-asserted */
ldr r0, =MDCNFG
ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13)
/* ldr r1, =0x80000403 */
str r1, [r0]
ldr r1, [r0] /* delay until written */
/* 3. wait nop power up waiting period (200ms)
* optimization: Steps 4+6 can be done during this
*/
wait #0x300
/* 4. Perform an initial Rcomp-calibration cycle */
ldr r0, =RCOMP
ldr r1, =0x80000000
str r1, [r0]
ldr r1, [r0] /* delay until written */
/* missing: program for automatic rcomp evaluation cycles */
/* 5. DDR DRAM strobe delay calibration */
ldr r0, =DDR_HCAL
ldr r1, =0x88000007
str r1, [r0]
wait #5
ldr r1, [r0] /* delay until written */
/* Set MDMRS */
ldr r0, =MDMRS
ldr r1, =0x60000033
str r1, [r0]
wait #300
/* Configure MDREFR */
ldr r0, =MDREFR
ldr r1, =0x00000006
str r1, [r0]
ldr r1, [r0]
/* Enable the dynamic memory controller */
ldr r0, =MDCNFG
ldr r1, [r0]
orr r1, r1, #MDCNFG_DMCEN
str r1, [r0]
#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
/* scrub/init SDRAM if enabled/present */
ldr r8, =CONFIG_SYS_DRAM_BASE /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
ldr r9, =CONFIG_SYS_DRAM_SIZE /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
mov r0, #0 /* scrub with 0x0000:0000 */
mov r1, #0
mov r2, #0
mov r3, #0
mov r4, #0
mov r5, #0
mov r6, #0
mov r7, #0
10: /* fastScrubLoop */
subs r9, r9, #32 /* 8 words/line */
stmia r8!, {r0-r7}
beq 15f
b 10b
#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
15:
/* Mask all interrupts */
mov r1, #0
mcr p6, 0, r1, c1, c0, 0 @ ICMR
/* Disable software and data breakpoints */
mov r0, #0
mcr p15,0,r0,c14,c8,0 /* ibcr0 */
mcr p15,0,r0,c14,c9,0 /* ibcr1 */
mcr p15,0,r0,c14,c4,0 /* dbcon */
/* Enable all debug functionality */
mov r0,#0x80000000
mcr p14,0,r0,c10,c0,0 /* dcsr */
endlowlevel_init:
mov pc, lr
|
