1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Linaro
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <errno.h>
#include <asm/cache.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/hi3660.h>
#include <asm/armv8/mmu.h>
#include <asm/psci.h>
#include <linux/arm-smccc.h>
#include <linux/delay.h>
#include <linux/psci.h>
#define PMIC_REG_TO_BUS_ADDR(x) (x << 2)
#define PMIC_VSEL_MASK 0x7
DECLARE_GLOBAL_DATA_PTR;
#if !CONFIG_IS_ENABLED(OF_CONTROL)
#include <dm/platform_data/serial_pl01x.h>
static const struct pl01x_serial_plat serial_plat = {
.base = HI3660_UART6_BASE,
.type = TYPE_PL011,
.clock = 19200000
};
U_BOOT_DRVINFO(hikey960_serial0) = {
.name = "serial_pl01x",
.plat = &serial_plat,
};
#endif
static struct mm_region hikey_mem_map[] = {
{
.virt = 0x0UL, /* DDR */
.phys = 0x0UL,
.size = 0xC0000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
.virt = 0xE0000000UL, /* Peripheral block */
.phys = 0xE0000000UL,
.size = 0x20000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = hikey_mem_map;
int board_early_init_f(void)
{
return 0;
}
int misc_init_r(void)
{
return 0;
}
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
void hikey960_sd_init(void)
{
u32 data;
/* Enable FPLL0 */
data = readl(SCTRL_SCFPLLCTRL0);
data |= SCTRL_SCFPLLCTRL0_FPLL0_EN;
writel(data, SCTRL_SCFPLLCTRL0);
/* Configure LDO16 */
data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79)) &
PMIC_VSEL_MASK;
data |= 6;
writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79));
data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78));
data |= 2;
writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78));
udelay(100);
/* Configure LDO9 */
data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b)) &
PMIC_VSEL_MASK;
data |= 5;
writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b));
data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a));
data |= 2;
writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a));
udelay(100);
/* GPIO CD */
writel(0, PINMUX4_SDDET);
/* SD Pinconf */
writel(15 << 4, PINCONF3_SDCLK);
writel((1 << 0) | (8 << 4), PINCONF3_SDCMD);
writel((1 << 0) | (8 << 4), PINCONF3_SDDATA0);
writel((1 << 0) | (8 << 4), PINCONF3_SDDATA1);
writel((1 << 0) | (8 << 4), PINCONF3_SDDATA2);
writel((1 << 0) | (8 << 4), PINCONF3_SDDATA3);
/* Set SD clock mux */
do {
data = readl(CRG_REG_BASE + 0xb8);
data |= ((1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16));
writel(data, CRG_REG_BASE + 0xb8);
data = readl(CRG_REG_BASE + 0xb8);
} while ((data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4)));
/* Take SD out of reset */
writel(1 << 18, CRG_PERRSTDIS4);
do {
data = readl(CRG_PERRSTSTAT4);
} while ((data & (1 << 18)) == (1 << 18));
/* Enable hclk_gate_sd */
data = readl(CRG_REG_BASE + 0);
data |= (1 << 30);
writel(data, CRG_REG_BASE + 0);
/* Enable clk_andgt_mmc */
data = readl(CRG_REG_BASE + 0xf4);
data |= ((1 << 3) | (1 << 3 << 16));
writel(data, CRG_REG_BASE + 0xf4);
/* Enable clk_gate_sd */
data = readl(CRG_PEREN4);
data |= (1 << 17);
writel(data, CRG_PEREN4);
do {
data = readl(CRG_PERCLKEN4);
} while ((data & (1 << 17)) != (1 << 17));
}
static void show_psci_version(void)
{
struct arm_smccc_res res;
arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
printf("PSCI: v%ld.%ld\n",
PSCI_VERSION_MAJOR(res.a0),
PSCI_VERSION_MINOR(res.a0));
}
int board_init(void)
{
/* Init SD */
hikey960_sd_init();
show_psci_version();
return 0;
}
void reset_cpu(ulong addr)
{
psci_system_reset();
}
|
