1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
|
/*
* Copyright (c) 2004 Picture Elements, Inc.
* Stephen Williams (steve@icarus.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
# define SDRAM_LEN 0x08000000
/*
* this is even after checkboard. It returns the size of the SDRAM
* that we have installed. This function is called by board_init_f
* in arch/powerpc/lib/board.c to initialize the memory and return what I
* found.
*/
phys_size_t initdram (int board_type)
{
/* Configure the SDRAMS */
/* disable memory controller */
mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
udelay (500);
/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR0);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR1);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Clear SDRAM0_ECCCFG (disable ECC) */
mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCESR);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
mtdcr (SDRAM0_CFGDATA, 0x010a4016);
/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
mtdcr (SDRAM0_CFGDATA, 0x00084001);
/* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
mtdcr (SDRAM0_CFGDATA, 0x04084001);
/* Memory Bank 2 Config == BE=0 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* Memory Bank 3 Config == BE=0 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* refresh timer = 0x400 */
mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
mtdcr (SDRAM0_CFGDATA, 0x04000000);
/* Power management idle timer set to the default. */
mtdcr (SDRAM0_CFGADDR, SDRAM0_PMIT);
mtdcr (SDRAM0_CFGDATA, 0x07c00000);
udelay (500);
/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */
mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, 0x80e00000);
return SDRAM_LEN;
}
/*
* The U-Boot core, as part of the initialization to prepare for
* loading the monitor into SDRAM, requests of this function that the
* memory be tested. Return 0 if the memory tests OK.
*/
int testdram (void)
{
unsigned long idx;
unsigned val;
unsigned errors;
volatile unsigned long *sdram;
#ifdef DEBUG
printf ("SDRAM Controller Registers --\n");
mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_CFG : 0x%08x\n", val);
mtdcr (SDRAM0_CFGADDR, 0x24);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_STATUS: 0x%08x\n", val);
mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_B0CR : 0x%08x\n", val);
mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_B1CR : 0x%08x\n", val);
mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_TR : 0x%08x\n", val);
mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_RTR : 0x%08x\n", val);
#endif
/* Wait for memory to be ready by testing MRSCMPbit
bit. Really, there should already have been plenty of time,
given it was started long ago. But, best to check. */
for (idx = 0; idx < 1000000; idx += 1) {
mtdcr (SDRAM0_CFGADDR, 0x24);
val = mfdcr (SDRAM0_CFGDATA);
if (val & 0x80000000)
break;
}
if (!(val & 0x80000000)) {
printf ("SDRAM ERROR: SDRAM0_STATUS never set!\n");
return 1;
}
/* Start memory test. */
printf ("test: %u MB - ", SDRAM_LEN / 1048576);
sdram = (unsigned long *) CONFIG_SYS_SDRAM_BASE;
printf ("write - ");
for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) {
sdram[idx + 0] = idx;
sdram[idx + 1] = ~idx;
}
printf ("read - ");
errors = 0;
for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) {
if (sdram[idx + 0] != idx)
errors += 1;
if (sdram[idx + 1] != ~idx)
errors += 1;
if (errors > 0)
break;
}
if (errors > 0) {
printf ("NOT OK\n");
printf ("FIRST ERROR at %p: 0x%08lx:0x%08lx != 0x%08lx:0x%08lx\n",
sdram + idx, sdram[idx + 0], sdram[idx + 1], idx, ~idx);
return 1;
}
printf ("ok\n");
return 0;
}
|
