1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux-mx53.h>
#include <asm/arch/clock.h>
#include <asm/gpio.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include "kp_id_rev.h"
#define BOOSTER_OFF IMX_GPIO_NR(2, 23)
#define LCD_BACKLIGHT IMX_GPIO_NR(1, 1)
#define KEY1 IMX_GPIO_NR(2, 26)
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
u32 size;
size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
gd->ram_size = size;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
static int power_init(void)
{
struct udevice *dev;
int ret;
ret = pmic_get("mc34708", &dev);
if (ret) {
printf("%s: mc34708 not found !\n", __func__);
return ret;
}
/* Set VDDGP to 1.110V for 800 MHz on SW1 */
pmic_clrsetbits(dev, REG_SW_0, SWx_VOLT_MASK_MC34708,
SWx_1_110V_MC34708);
/* Set VCC as 1.30V on SW2 */
pmic_clrsetbits(dev, REG_SW_1, SWx_VOLT_MASK_MC34708,
SWx_1_300V_MC34708);
/* Set global reset timer to 4s */
pmic_clrsetbits(dev, REG_POWER_CTL2, TIMER_MASK_MC34708,
TIMER_4S_MC34708);
return ret;
}
static void setup_clocks(void)
{
int ret;
u32 ref_clk = MXC_HCLK;
/*
* CPU clock set to 800MHz and DDR to 400MHz
*/
ret = mxc_set_clock(ref_clk, 800, MXC_ARM_CLK);
if (ret)
printf("CPU: Switch CPU clock to 800MHZ failed\n");
ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
if (ret)
printf("CPU: Switch DDR clock to 400MHz failed\n");
}
static void setup_ups(void)
{
gpio_request(BOOSTER_OFF, "BOOSTER_OFF");
gpio_direction_output(BOOSTER_OFF, 0);
}
int board_early_init_f(void)
{
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
void board_disable_display(void)
{
gpio_request(LCD_BACKLIGHT, "LCD_BACKLIGHT");
gpio_direction_output(LCD_BACKLIGHT, 0);
}
void board_misc_setup(void)
{
gpio_request(KEY1, "KEY1_GPIO");
gpio_direction_input(KEY1);
if (gpio_get_value(KEY1))
env_set("key1", "off");
else
env_set("key1", "on");
}
int board_late_init(void)
{
int ret = 0;
board_disable_display();
setup_ups();
if (!power_init())
setup_clocks();
ret = read_eeprom();
if (ret)
printf("Error %d reading EEPROM content!\n", ret);
show_eeprom();
read_board_id();
board_misc_setup();
return ret;
}
|
