1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
// SPDX-License-Identifier: GPL-2.0+
#include "pitx_misc.h"
#include <efi.h>
#include <efi_loader.h>
#include <init.h>
#include <mmc.h>
#include <miiphy.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx8mq_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm-generic/gpio.h>
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <linux/delay.h>
#include <linux/kernel.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
static iomux_v3_cfg_t const wdog_pads[] = {
IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
static iomux_v3_cfg_t const uart_pads[] = {
IMX8MQ_PAD_UART3_RXD__UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
IMX8MQ_PAD_UART3_TXD__UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
IMX8MQ_PAD_ECSPI1_SS0__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
IMX8MQ_PAD_ECSPI1_MISO__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)
struct efi_fw_image fw_images[] = {
{
.image_type_id = KONTRON_PITX_IMX8M_FIT_IMAGE_GUID,
.fw_name = u"KONTRON-PITX-IMX8M-UBOOT",
.image_index = 1,
},
};
struct efi_capsule_update_info update_info = {
.dfu_string = "mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1",
.num_images = ARRAY_SIZE(fw_images),
.images = fw_images,
};
#endif /* EFI_HAVE_CAPSULE_SUPPORT */
int board_early_init_f(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
return 0;
}
int board_phys_sdram_size(phys_size_t *memsize)
{
int variant = 0;
variant = get_pitx_board_variant();
switch(variant) {
case 2:
*memsize = 0x80000000;
break;
case 3:
*memsize = 0x100000000;
break;
default:
printf("Unknown DDR type!!!\n");
*memsize = 0x40000000;
break;
}
debug("Memsize: %d MiB\n", (int)(*memsize >> 20));
return 0;
}
#ifdef CONFIG_FEC_MXC
#define FEC_RST_PAD IMX_GPIO_NR(1, 11)
static iomux_v3_cfg_t const fec1_rst_pads[] = {
IMX8MQ_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_fec(void)
{
imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
ARRAY_SIZE(fec1_rst_pads));
}
int board_phy_config(struct phy_device *phydev)
{
unsigned int val;
/*
* Set LED configuration register 1:
* LED2_SEL: 0b1011 (link established, blink on activity)
*/
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x18);
val &= 0xf0ff;
phy_write(phydev, MDIO_DEVAD_NONE, 0x18, val | (0xb << 8));
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#endif
int board_init(void)
{
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3)
init_usb_clk();
#endif
return 0;
}
#ifdef CONFIG_MISC_INIT_R
#define TPM_RESET IMX_GPIO_NR(3, 2)
#define USBHUB_RESET IMX_GPIO_NR(3, 4)
static void reset_device_by_gpio(const char *label, int pin, int delay_ms)
{
gpio_request(pin, label);
gpio_direction_output(pin, 0);
mdelay(delay_ms);
gpio_direction_output(pin, 1);
}
int misc_init_r(void)
{
/*
* reset TPM chip (Infineon SLB9670) as required by datasheet
* (60ms minimum Reset Inactive Time, 70ms implemented)
*/
reset_device_by_gpio("tpm_reset", TPM_RESET, 70);
/*
* reset USB hub as required by datasheet
* (3ms minimum reset duration, 10ms implemented)
*/
reset_device_by_gpio("usbhub_reset", USBHUB_RESET, 10);
return 0;
}
#endif
int board_mmc_get_env_dev(int devno)
{
return devno;
}
uint mmc_get_env_part(struct mmc *mmc)
{
/* part 1 for eMMC, part 1 for SD card */
return (mmc_get_env_dev() == 0) ? 1 : 0;
}
int board_late_init(void)
{
return 0;
}
|
