1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
|
/*
* (C) Copyright 2008
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8260.h>
#include <ioports.h>
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */
/* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_PWRDWN */
/* PA24 */ { 1, 0, 0, 1, 0, 1 }, /* ETH_RESET */
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
/* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_SLEEP */
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
/* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* MDIO */
/* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
/* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
},
/* Port B */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */
/* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */
/* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */
/* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */
/* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */
/* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */
/* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */
/* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */
/* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */
/* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */
/* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */
/* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */
/* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */
/* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
/* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RxD */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB12 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TxD */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
/* PC30 */ { 1, 1, 1, 1, 0, 0 }, /* Timer1 OUT */
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
/* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
/* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC RxCLK 11 */
/* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC TxCLK 12 */
/* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */
/* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
/* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
/* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW1 */
/* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW0 */
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
/* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* SPA_TX_EN */
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */
/* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
/* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */
/* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
/* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
#if defined(CONFIG_HARD_I2C)
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
#else
/* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */
/* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */
#endif
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
}
};
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or1;
*orx_ptr = orx;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
size = get_ram_size ((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
return (size);
}
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize;
#ifndef CONFIG_SYS_RAMBOOT
long sizelittle, sizebig;
#endif
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
(uchar *) CONFIG_SYS_SDRAM_BASE);
sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
(uchar *) CONFIG_SYS_SDRAM_BASE);
if (sizelittle < sizebig) {
psize = sizebig;
} else {
psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
(uchar *) CONFIG_SYS_SDRAM_BASE);
}
#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
return (psize);
}
int checkboard (void)
{
puts ("Board: MUAS3001\n");
return 0;
}
/*
* Early board initalization.
*/
int board_early_init_r (void)
{
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
DECLARE_GLOBAL_DATA_PTR;
/*
* update "memory" property in the blob
*/
void ft_blob_update (void *blob, bd_t *bd)
{
int ret, nodeoffset = 0;
ulong flash_data[4] = {0};
ulong speed = 0;
/* update Flash addr, size */
flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
sizeof (flash_data));
if (ret < 0)
printf ("ft_blob_update): cannot set /localbus/ranges "
"property err:%s\n", fdt_strerror(ret));
} else {
/* memory node is required in dts */
printf ("ft_blob_update(): cannot find /localbus node "
"err:%s\n", fdt_strerror (nodeoffset));
}
/* baudrate */
nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
if (nodeoffset >= 0) {
speed = cpu_to_be32 (gd->baudrate);
ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
sizeof (unsigned long));
if (ret < 0)
printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
"property err:%s\n", fdt_strerror (ret));
} else {
/* baudrate is required in dts */
printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
"err:%s\n", fdt_strerror (nodeoffset));
}
}
void ft_board_setup (void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
|
