1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
|
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <power/pmic.h>
#include <power/stpmu1.h>
#ifdef CONFIG_PMIC_STPMU1
int board_ddr_power_init(void)
{
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
DM_GET_DRIVER(pmic_stpmu1), &dev);
if (ret)
/* No PMIC on board */
return 0;
/* Set LDO3 to sync mode */
ret = pmic_reg_read(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3));
if (ret < 0)
return ret;
ret &= ~STPMU1_LDO3_MODE;
ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
ret = pmic_reg_write(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
ret);
if (ret < 0)
return ret;
/* Set BUCK2 to 1.35V */
ret = pmic_clrsetbits(dev,
STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
STPMU1_BUCK_OUTPUT_MASK,
STPMU1_BUCK2_1350000V);
if (ret < 0)
return ret;
/* Enable BUCK2 and VREF */
ret = pmic_clrsetbits(dev,
STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
STPMU1_BUCK_EN, STPMU1_BUCK_EN);
if (ret < 0)
return ret;
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
ret = pmic_clrsetbits(dev, STPMU1_VREF_CTRL_REG,
STPMU1_VREF_EN, STPMU1_VREF_EN);
if (ret < 0)
return ret;
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
/* Enable LDO3 */
ret = pmic_clrsetbits(dev,
STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
STPMU1_LDO_EN, STPMU1_LDO_EN);
if (ret < 0)
return ret;
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
return 0;
}
#endif
|
