1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/*
* Board specific setup info
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/omap2420.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks.h>
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
/**************************************************************************
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
* R1 = SRAM destination address.
*************************************************************************/
.global cpy_clk_code
cpy_clk_code:
/* Copy DPLL code into SRAM */
adr r0, go_to_speed /* get addr of clock setting code */
mov r2, #384 /* r2 size to copy (div by 32 bytes) */
mov r1, r1 /* r1 <- dest address (passed in) */
add r2, r2, r0 /* r2 <- source end address */
next2:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
bne next2
mov pc, lr /* back to caller */
/* ****************************************************************************
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
* -executed from SRAM.
* R0 = PRCM_CLKCFG_CTRL - addr of valid reg
* R1 = CM_CLKEN_PLL - addr dpll ctlr reg
* R2 = dpll value
* R3 = CM_IDLEST_CKGEN - addr dpll lock wait
******************************************************************************/
.global go_to_speed
go_to_speed:
sub sp, sp, #0x4 /* get some stack space */
str r4, [sp] /* save r4's value */
/* move into fast relock bypass */
ldr r8, pll_ctl_add
mov r4, #0x2
str r4, [r8]
ldr r4, pll_stat
block:
ldr r8, [r4] /* wait for bypass to take effect */
and r8, r8, #0x3
cmp r8, #0x1
bne block
/* set new dpll dividers _after_ in bypass */
ldr r4, pll_div_add
ldr r8, pll_div_val
str r8, [r4]
/* now prepare GPMC (flash) for new dpll speed */
/* flash needs to be stable when we jump back to it */
ldr r4, cfg3_0_addr
ldr r8, cfg3_0_val
str r8, [r4]
ldr r4, cfg4_0_addr
ldr r8, cfg4_0_val
str r8, [r4]
ldr r4, cfg1_0_addr
ldr r8, [r4]
orr r8, r8, #0x3 /* up gpmc divider */
str r8, [r4]
/* setup to 2x loop though code. The first loop pre-loads the
* icache, the 2nd commits the prcm config, and locks the dpll
*/
mov r4, #0x1000 /* spin spin spin */
mov r8, #0x4 /* first pass condition & set registers */
cmp r8, #0x4
2:
ldrne r8, [r3] /* DPLL lock check */
and r8, r8, #0x7
cmp r8, #0x2
beq 4f
3:
subeq r8, r8, #0x1
streq r8, [r0] /* commit dividers (2nd time) */
nop
lloop1:
sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
nop
cmp r4, #0x0
bne lloop1
mov r4, #0x40000
cmp r8, #0x1
nop
streq r2, [r1] /* lock dpll (2nd time) */
nop
lloop2:
sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
nop
cmp r4, #0x0
bne lloop2
mov r4, #0x40000
cmp r8, #0x1
nop
ldreq r8, [r3] /* get lock condition for dpll */
cmp r8, #0x4 /* first time though? */
bne 2b
moveq r8, #0x2 /* set to dpll check condition. */
beq 3b /* if condition not true branch */
4:
ldr r4, [sp]
add sp, sp, #0x4 /* return stack space */
mov pc, lr /* back to caller, locked */
_go_to_speed: .word go_to_speed
/* these constants need to be close for PIC code */
cfg3_0_addr:
.word GPMC_CONFIG3_0
cfg3_0_val:
.word H4_24XX_GPMC_CONFIG3_0
cfg4_0_addr:
.word GPMC_CONFIG4_0
cfg4_0_val:
.word H4_24XX_GPMC_CONFIG4_0
cfg1_0_addr:
.word GPMC_CONFIG1_0
pll_ctl_add:
.word CM_CLKEN_PLL
pll_stat:
.word CM_IDLEST_CKGEN
pll_div_add:
.word CM_CLKSEL1_PLL
pll_div_val:
.word DPLL_VAL /* DPLL setting (300MHz default) */
.globl lowlevel_init
lowlevel_init:
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
bl s_init /* go setup pll,mux,memory */
ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */
/* map interrupt controller */
ldr r0, VAL_INTH_SETUP
mcr p15, 0, r0, c15, c2, 4
/* back to arch calling code */
mov pc, lr
/* the literal pools origin */
.ltorg
REG_CONTROL_STATUS:
.word CONTROL_STATUS
VAL_INTH_SETUP:
.word PERIFERAL_PORT_BASE
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK
|
