1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014-2016, Toradex AG
*/
// Register Output for PF0100 programmer
// Customer: Toradex AG
// Program: Apalis iMX6
// Sample marking:
// Date: 12.02.2014
// Time: 17:16:41
// Generated from Spreadsheet Revision: P1.8
/* sed commands to get from programmer script to struct */
/* sed -e 's/^WRITE_I2C:\(..\):\(..\)/\{pmic_i2c, 0x\1, 0x\2\},/g' -e 's/^DELAY:\([0-9]*\)/\{pmic_delay, 0, \1\},/g' pf0100_otp.txt > pf0100_otp.inc
sed -i -e 's/^VPGM:ON/\{pmic_vpgm, 0, 1},/g' -e 's/^VPGM:OFF/\{pmic_vpgm, 0, 0},/g' pf0100_otp.inc
sed -i -e 's/^PWRON: HIGH/\{pmic_pwr, 0, 1},/g' -e 's/^PWRON:LOW/\{pmic_pwr, 0, 0},/g' pf0100_otp.inc */
enum { pmic_i2c, pmic_delay, pmic_vpgm, pmic_pwr };
struct pmic_otp_prog_t{
unsigned char cmd;
unsigned char reg;
unsigned short value;
};
struct pmic_otp_prog_t pmic_otp_prog[] = {
{pmic_i2c, 0x7F, 0x01}, // Access FSL EXT Page 1
{pmic_i2c, 0xA0, 0x2B}, // Auto gen from Row94
{pmic_i2c, 0xA1, 0x01}, // Auto gen from Row95
{pmic_i2c, 0xA2, 0x05}, // Auto gen from Row96
{pmic_i2c, 0xA8, 0x2B}, // Auto gen from Row102
{pmic_i2c, 0xA9, 0x02}, // Auto gen from Row103
{pmic_i2c, 0xAA, 0x01}, // Auto gen from Row104
{pmic_i2c, 0xAC, 0x18}, // Auto gen from Row106
{pmic_i2c, 0xAE, 0x01}, // Auto gen from Row108
{pmic_i2c, 0xB0, 0x2C}, // Auto gen from Row110
{pmic_i2c, 0xB1, 0x04}, // Auto gen from Row111
{pmic_i2c, 0xB2, 0x01}, // Auto gen from Row112
{pmic_i2c, 0xB4, 0x2C}, // Auto gen from Row114
{pmic_i2c, 0xB5, 0x04}, // Auto gen from Row115
{pmic_i2c, 0xB6, 0x01}, // Auto gen from Row116
{pmic_i2c, 0xB8, 0x18}, // Auto gen from Row118
{pmic_i2c, 0xBA, 0x01}, // Auto gen from Row120
{pmic_i2c, 0xBD, 0x1F}, // Auto gen from Row123
{pmic_i2c, 0xC0, 0x06}, // Auto gen from Row126
{pmic_i2c, 0xC4, 0x04}, // Auto gen from Row130
{pmic_i2c, 0xC8, 0x0E}, // Auto gen from Row134
{pmic_i2c, 0xC9, 0x08}, // Auto gen from Row135
{pmic_i2c, 0xCC, 0x0E}, // Auto gen from Row138
{pmic_i2c, 0xCD, 0x05}, // Auto gen from Row139
{pmic_i2c, 0xD0, 0x0C}, // Auto gen from Row142
{pmic_i2c, 0xD1, 0x05}, // Auto gen from Row143
{pmic_i2c, 0xD5, 0x07}, // Auto gen from Row147
{pmic_i2c, 0xD8, 0x07}, // Auto gen from Row150
{pmic_i2c, 0xD9, 0x06}, // Auto gen from Row151
{pmic_i2c, 0xDC, 0x0A}, // Auto gen from Row154
{pmic_i2c, 0xDD, 0x03}, // Auto gen from Row155
{pmic_i2c, 0xE0, 0x07}, // Auto gen from Row158
#if 0 /* TBB mode */
{pmic_i2c, 0xE4, 0x80}, // TBB_POR = 1
{pmic_delay, 0, 10},
#else
// Write OTP
{pmic_i2c, 0xE4, 0x02}, // FUSE POR1=1
{pmic_i2c, 0xE5, 0x02}, // FUSE POR2=1
{pmic_i2c, 0xE6, 0x02}, // FUSE POR3=1
{pmic_i2c, 0xF0, 0x1F}, // Enable ECC for fuse banks 1 to 5 by writing to OTP EN ECC0 register
{pmic_i2c, 0xF1, 0x1F}, // Enable ECC for fuse banks 6 to 10 by writing to OTP EN ECC1 register
{pmic_i2c, 0x7F, 0x02}, // Access PF0100 EXT Page2
{pmic_i2c, 0xD0, 0x1F}, // Set Auto ECC for fuse banks 1 to 5 by writing to OTP AUTO ECC0 register
{pmic_i2c, 0xD1, 0x1F}, // Set Auto ECC for fuse banks 6 to 10 by writing to OTP AUTO ECC1 register
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
{pmic_vpgm, 0, 1}, // Turn ON 8V SWBST
//VPGM:DOWN:n
//VPGM:UP:n
{pmic_delay, 0, 500}, // Adds 500msec delay to allow VPGM time to ramp up
//-----------------------------------------------------------------------------------
// PF0100 OTP MANUAL-PROGRAMMING (BANK 1 thru 10)
//-----------------------------------------------------------------------------------
// BANK 1
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF1, 0x03}, // Set Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF1, 0x0B}, // Set Bank 1 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF1, 0x03}, // Reset Bank 1 ANTIFUSE_EN
{pmic_i2c, 0xF1, 0x00}, // Reset Bank 1 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 2
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF2, 0x03}, // Set Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF2, 0x0B}, // Set Bank 2 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF2, 0x03}, // Reset Bank 2 ANTIFUSE_EN
{pmic_i2c, 0xF2, 0x00}, // Reset Bank 2 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 3
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF3, 0x03}, // Set Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF3, 0x0B}, // Set Bank 3 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF3, 0x03}, // Reset Bank 3 ANTIFUSE_EN
{pmic_i2c, 0xF3, 0x00}, // Reset Bank 3 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 4
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF4, 0x03}, // Set Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF4, 0x0B}, // Set Bank 4 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF4, 0x03}, // Reset Bank 4 ANTIFUSE_EN
{pmic_i2c, 0xF4, 0x00}, // Reset Bank 4 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 5
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF5, 0x03}, // Set Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF5, 0x0B}, // Set Bank 5 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF5, 0x03}, // Reset Bank 5 ANTIFUSE_EN
{pmic_i2c, 0xF5, 0x00}, // Reset Bank 5 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 6
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF6, 0x03}, // Set Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF6, 0x0B}, // Set Bank 6 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF6, 0x03}, // Reset Bank 6 ANTIFUSE_EN
{pmic_i2c, 0xF6, 0x00}, // Reset Bank 6 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 7
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF7, 0x03}, // Set Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF7, 0x0B}, // Set Bank 7 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF7, 0x03}, // Reset Bank 7 ANTIFUSE_EN
{pmic_i2c, 0xF7, 0x00}, // Reset Bank 7 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 8
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF8, 0x03}, // Set Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF8, 0x0B}, // Set Bank 8 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF8, 0x03}, // Reset Bank 8 ANTIFUSE_EN
{pmic_i2c, 0xF8, 0x00}, // Reset Bank 8 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 9
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF9, 0x03}, // Set Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xF9, 0x0B}, // Set Bank 9 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xF9, 0x03}, // Reset Bank 9 ANTIFUSE_EN
{pmic_i2c, 0xF9, 0x00}, // Reset Bank 9 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
// BANK 10
//-----------------------------------------------------------------------------------
{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xFA, 0x03}, // Set Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
{pmic_i2c, 0xFA, 0x0B}, // Set Bank 10 ANTIFUSE_EN
{pmic_delay, 0, 10}, // Allow time for bank programming to complete
{pmic_i2c, 0xFA, 0x03}, // Reset Bank 10 ANTIFUSE_EN
{pmic_i2c, 0xFA, 0x00}, // Reset Bank 10 ANTIFUSE_RW and ANTIFUSE_BYPASS bits
//-----------------------------------------------------------------------------------
{pmic_vpgm, 0, 0}, // Turn off 8V SWBST
{pmic_delay, 0, 500}, // Adds delay to allow VPGM to bleed off
{pmic_i2c, 0xD0, 0x00}, // Clear
{pmic_i2c, 0xD1, 0x00}, // Clear
{pmic_pwr, 0, 0}, // PWRON LOW to reload new OTP data
{pmic_delay, 0, 500},
{pmic_pwr, 0, 1},
#endif
};
|
