1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
|
Dialog Semiconductor DA7219 Audio Codec bindings
DA7219 is an audio codec with advanced accessory detect features.
======
Required properties:
- compatible : Should be "dlg,da7219"
- reg: Specifies the I2C slave address
- interrupts : IRQ line info for DA7219.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
- VDD-supply: VDD power supply for the device
- VDDMIC-supply: VDDMIC power supply for the device
- VDDIO-supply: VDDIO power supply for the device
(See Documentation/devicetree/bindings/regulator/regulator.txt for further
information relating to regulators)
Optional properties:
- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
interrupt is to be used to wake system, otherwise "irq" should be used.
- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
- #clock-cells : Should be set to '<0>', only one clock source provided;
- clock-output-names : Name given for DAI clocks output;
- clocks : phandle and clock specifier for codec MCLK.
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
- dlg,micbias-lvl : Voltage (mV) for Mic Bias
[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
- dlg,mic-amp-in-sel : Mic input source type
["diff", "se_p", "se_n"]
- dlg,mclk-name : String name of MCLK for ACPI
Deprecated properties:
- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
(LDO unavailable in production HW so property no longer required).
======
Child node - 'da7219_aad':
Optional properties:
- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
[<2800>, <2900>]
- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
[<200>, <500>, <750>, <1000>]
- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
- dlg,jack-rem-deb : Debounce time for jack removal (ms)
[<1>, <5>, <10>, <20>]
- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
[0x0 - 0xFF]
- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
[0x0 - 0xFF]
- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
[0x0 - 0xFF]
- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
[0x0 - 0xFF]
- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
[<1>, <2>, <4>, <8>]
- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
[<1>, <2>, <4>, <8>]
======
Example:
codec: da7219@1a {
compatible = "dlg,da7219";
reg = <0x1a>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
VDD-supply = <®_audio>;
VDDMIC-supply = <®_audio>;
VDDIO-supply = <®_audio>;
#clock-cells = <0>;
clock-output-names = "dai-clks";
clocks = <&clks 201>;
clock-names = "mclk";
dlg,ldo-lvl = <1200>;
dlg,micbias-lvl = <2600>;
dlg,mic-amp-in-sel = "diff";
da7219_aad {
dlg,btn-cfg = <50>;
dlg,mic-det-thr = <500>;
dlg,jack-ins-deb = <20>;
dlg,jack-det-rate = "32ms_64ms";
dlg,jack-rem-deb = <1>;
dlg,a-d-btn-thr = <0xa>;
dlg,d-b-btn-thr = <0x16>;
dlg,b-c-btn-thr = <0x21>;
dlg,c-mic-btn-thr = <0x3E>;
dlg,btn-avg = <4>;
dlg,adc-1bit-rpt = <1>;
};
};
|
