1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
*
* Originally based on the Linux kernel v4.18 drivers/iio/adc/stm32-adc-core.c.
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <power/regulator.h>
#include "stm32-adc-core.h"
/* STM32H7 - common registers for all ADC instances */
#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
/* STM32H7_ADC_CCR - bit fields */
#define STM32H7_PRESC_SHIFT 18
#define STM32H7_PRESC_MASK GENMASK(21, 18)
#define STM32H7_CKMODE_SHIFT 16
#define STM32H7_CKMODE_MASK GENMASK(17, 16)
/* STM32 H7 maximum analog clock rate (from datasheet) */
#define STM32H7_ADC_MAX_CLK_RATE 36000000
/**
* struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock
* @ckmode: ADC clock mode, Async or sync with prescaler.
* @presc: prescaler bitfield for async clock mode
* @div: prescaler division ratio
*/
struct stm32h7_adc_ck_spec {
u32 ckmode;
u32 presc;
int div;
};
static const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = {
/* 00: CK_ADC[1..3]: Asynchronous clock modes */
{ 0, 0, 1 },
{ 0, 1, 2 },
{ 0, 2, 4 },
{ 0, 3, 6 },
{ 0, 4, 8 },
{ 0, 5, 10 },
{ 0, 6, 12 },
{ 0, 7, 16 },
{ 0, 8, 32 },
{ 0, 9, 64 },
{ 0, 10, 128 },
{ 0, 11, 256 },
/* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */
{ 1, 0, 1 },
{ 2, 0, 2 },
{ 3, 0, 4 },
};
static int stm32h7_adc_clk_sel(struct udevice *dev,
struct stm32_adc_common *common)
{
u32 ckmode, presc;
unsigned long rate;
unsigned int i;
int div;
/* stm32h7 bus clock is common for all ADC instances (mandatory) */
if (!clk_valid(&common->bclk)) {
dev_err(dev, "No bclk clock found\n");
return -ENOENT;
}
/*
* stm32h7 can use either 'bus' or 'adc' clock for analog circuitry.
* So, choice is to have bus clock mandatory and adc clock optional.
* If optional 'adc' clock has been found, then try to use it first.
*/
if (clk_valid(&common->aclk)) {
/*
* Asynchronous clock modes (e.g. ckmode == 0)
* From spec: PLL output musn't exceed max rate
*/
rate = clk_get_rate(&common->aclk);
if (!rate) {
dev_err(dev, "Invalid aclk rate: 0\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
presc = stm32h7_adc_ckmodes_spec[i].presc;
div = stm32h7_adc_ckmodes_spec[i].div;
if (ckmode)
continue;
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
goto out;
}
}
/* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */
rate = clk_get_rate(&common->bclk);
if (!rate) {
dev_err(dev, "Invalid bus clock rate: 0\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
presc = stm32h7_adc_ckmodes_spec[i].presc;
div = stm32h7_adc_ckmodes_spec[i].div;
if (!ckmode)
continue;
if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
goto out;
}
dev_err(dev, "clk selection failed\n");
return -EINVAL;
out:
/* rate used later by each ADC instance to control BOOST mode */
common->rate = rate / div;
/* Set common clock mode and prescaler */
clrsetbits_le32(common->base + STM32H7_ADC_CCR,
STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK,
ckmode << STM32H7_CKMODE_SHIFT |
presc << STM32H7_PRESC_SHIFT);
dev_dbg(dev, "Using %s clock/%d source at %ld kHz\n",
ckmode ? "bus" : "adc", div, common->rate / 1000);
return 0;
}
static int stm32_adc_core_probe(struct udevice *dev)
{
struct stm32_adc_common *common = dev_get_priv(dev);
int ret;
common->base = dev_read_addr_ptr(dev);
if (!common->base) {
dev_err(dev, "can't get address\n");
return -ENOENT;
}
ret = device_get_supply_regulator(dev, "vref-supply", &common->vref);
if (ret) {
dev_err(dev, "can't get vref-supply: %d\n", ret);
return ret;
}
ret = regulator_get_value(common->vref);
if (ret < 0) {
dev_err(dev, "can't get vref-supply value: %d\n", ret);
return ret;
}
common->vref_uv = ret;
ret = clk_get_by_name(dev, "adc", &common->aclk);
if (!ret) {
ret = clk_enable(&common->aclk);
if (ret) {
dev_err(dev, "Can't enable aclk: %d\n", ret);
return ret;
}
}
ret = clk_get_by_name(dev, "bus", &common->bclk);
if (!ret) {
ret = clk_enable(&common->bclk);
if (ret) {
dev_err(dev, "Can't enable bclk: %d\n", ret);
goto err_aclk_disable;
}
}
ret = stm32h7_adc_clk_sel(dev, common);
if (ret)
goto err_bclk_disable;
return ret;
err_bclk_disable:
if (clk_valid(&common->bclk))
clk_disable(&common->bclk);
err_aclk_disable:
if (clk_valid(&common->aclk))
clk_disable(&common->aclk);
return ret;
}
static const struct udevice_id stm32_adc_core_ids[] = {
{ .compatible = "st,stm32h7-adc-core" },
{ .compatible = "st,stm32mp1-adc-core" },
{}
};
U_BOOT_DRIVER(stm32_adc_core) = {
.name = "stm32-adc-core",
.id = UCLASS_SIMPLE_BUS,
.of_match = stm32_adc_core_ids,
.probe = stm32_adc_core_probe,
.priv_auto = sizeof(struct stm32_adc_common),
};
|
