1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
|
/*
* i2c.c - driver for ADI TWI/I2C
*
* Copyright (c) 2006-2014 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <console.h>
#include <i2c.h>
#include <asm/clock.h>
#include <asm/twi.h>
#include <asm/io.h>
static struct twi_regs *i2c_get_base(struct i2c_adapter *adap);
/* Every register is 32bit aligned, but only 16bits in size */
#define ureg(name) u16 name; u16 __pad_##name;
struct twi_regs {
ureg(clkdiv);
ureg(control);
ureg(slave_ctl);
ureg(slave_stat);
ureg(slave_addr);
ureg(master_ctl);
ureg(master_stat);
ureg(master_addr);
ureg(int_stat);
ureg(int_mask);
ureg(fifo_ctl);
ureg(fifo_stat);
char __pad[0x50];
ureg(xmt_data8);
ureg(xmt_data16);
ureg(rcv_data8);
ureg(rcv_data16);
};
#undef ureg
#ifdef TWI_CLKDIV
#define TWI0_CLKDIV TWI_CLKDIV
# ifdef CONFIG_SYS_MAX_I2C_BUS
# undef CONFIG_SYS_MAX_I2C_BUS
# endif
#define CONFIG_SYS_MAX_I2C_BUS 1
#endif
/*
* The way speed is changed into duty often results in integer truncation
* with 50% duty, so we'll force rounding up to the next duty by adding 1
* to the max. In practice this will get us a speed of something like
* 385 KHz. The other limit is easy to handle as it is only 8 bits.
*/
#define I2C_SPEED_MAX 400000
#define I2C_SPEED_TO_DUTY(speed) (5000000 / (speed))
#define I2C_DUTY_MAX (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
#define I2C_DUTY_MIN 0xff /* 8 bit limited */
#define SYS_I2C_DUTY I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
/* Note: duty is inverse of speed, so the comparisons below are correct */
#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
# error "The I2C hardware can only operate 20KHz - 400KHz"
#endif
/* All transfers are described by this data structure */
struct adi_i2c_msg {
u8 flags;
#define I2C_M_COMBO 0x4
#define I2C_M_STOP 0x2
#define I2C_M_READ 0x1
int len; /* msg length */
u8 *buf; /* pointer to msg data */
int alen; /* addr length */
u8 *abuf; /* addr buffer */
};
/* Allow msec timeout per ~byte transfer */
#define I2C_TIMEOUT 10
/**
* wait_for_completion - manage the actual i2c transfer
* @msg: the i2c msg
*/
static int wait_for_completion(struct twi_regs *twi, struct adi_i2c_msg *msg)
{
u16 int_stat, ctl;
ulong timebase = get_timer(0);
do {
int_stat = readw(&twi->int_stat);
if (int_stat & XMTSERV) {
writew(XMTSERV, &twi->int_stat);
if (msg->alen) {
writew(*(msg->abuf++), &twi->xmt_data8);
--msg->alen;
} else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
writew(*(msg->buf++), &twi->xmt_data8);
--msg->len;
} else {
ctl = readw(&twi->master_ctl);
if (msg->flags & I2C_M_COMBO)
writew(ctl | RSTART | MDIR,
&twi->master_ctl);
else
writew(ctl | STOP, &twi->master_ctl);
}
}
if (int_stat & RCVSERV) {
writew(RCVSERV, &twi->int_stat);
if (msg->len) {
*(msg->buf++) = readw(&twi->rcv_data8);
--msg->len;
} else if (msg->flags & I2C_M_STOP) {
ctl = readw(&twi->master_ctl);
writew(ctl | STOP, &twi->master_ctl);
}
}
if (int_stat & MERR) {
writew(MERR, &twi->int_stat);
return msg->len;
}
if (int_stat & MCOMP) {
writew(MCOMP, &twi->int_stat);
if (msg->flags & I2C_M_COMBO && msg->len) {
ctl = readw(&twi->master_ctl);
ctl = (ctl & ~RSTART) |
(min(msg->len, 0xff) << 6) | MEN | MDIR;
writew(ctl, &twi->master_ctl);
} else
break;
}
/* If we were able to do something, reset timeout */
if (int_stat)
timebase = get_timer(0);
} while (get_timer(timebase) < I2C_TIMEOUT);
return msg->len;
}
static int i2c_transfer(struct i2c_adapter *adap, uint8_t chip, uint addr,
int alen, uint8_t *buffer, int len, uint8_t flags)
{
struct twi_regs *twi = i2c_get_base(adap);
int ret;
u16 ctl;
uchar addr_buffer[] = {
(addr >> 0),
(addr >> 8),
(addr >> 16),
};
struct adi_i2c_msg msg = {
.flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
.buf = buffer,
.len = len,
.abuf = addr_buffer,
.alen = alen,
};
/* wait for things to settle */
while (readw(&twi->master_stat) & BUSBUSY)
if (ctrlc())
return 1;
/* Set Transmit device address */
writew(chip, &twi->master_addr);
/* Clear the FIFO before starting things */
writew(XMTFLUSH | RCVFLUSH, &twi->fifo_ctl);
writew(0, &twi->fifo_ctl);
/* prime the pump */
if (msg.alen) {
len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
writew(*(msg.abuf++), &twi->xmt_data8);
--msg.alen;
} else if (!(msg.flags & I2C_M_READ) && msg.len) {
writew(*(msg.buf++), &twi->xmt_data8);
--msg.len;
}
/* clear int stat */
writew(-1, &twi->master_stat);
writew(-1, &twi->int_stat);
writew(0, &twi->int_mask);
/* Master enable */
ctl = readw(&twi->master_ctl);
ctl = (ctl & FAST) | (min(len, 0xff) << 6) | MEN |
((msg.flags & I2C_M_READ) ? MDIR : 0);
writew(ctl, &twi->master_ctl);
/* process the rest */
ret = wait_for_completion(twi, &msg);
if (ret) {
ctl = readw(&twi->master_ctl) & ~MEN;
writew(ctl, &twi->master_ctl);
ctl = readw(&twi->control) & ~TWI_ENA;
writew(ctl, &twi->control);
ctl = readw(&twi->control) | TWI_ENA;
writew(ctl, &twi->control);
}
return ret;
}
static uint adi_i2c_setspeed(struct i2c_adapter *adap, uint speed)
{
struct twi_regs *twi = i2c_get_base(adap);
u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
/* Set TWI interface clock */
if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
return -1;
clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
writew(clkdiv, &twi->clkdiv);
/* Don't turn it on */
writew(speed > 100000 ? FAST : 0, &twi->master_ctl);
return 0;
}
static void adi_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
struct twi_regs *twi = i2c_get_base(adap);
u16 prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
/* Set TWI internal clock as 10MHz */
writew(prescale, &twi->control);
/* Set TWI interface clock as specified */
i2c_set_bus_speed(speed);
/* Enable it */
writew(TWI_ENA | prescale, &twi->control);
}
static int adi_i2c_read(struct i2c_adapter *adap, uint8_t chip,
uint addr, int alen, uint8_t *buffer, int len)
{
return i2c_transfer(adap, chip, addr, alen, buffer,
len, alen ? I2C_M_COMBO : I2C_M_READ);
}
static int adi_i2c_write(struct i2c_adapter *adap, uint8_t chip,
uint addr, int alen, uint8_t *buffer, int len)
{
return i2c_transfer(adap, chip, addr, alen, buffer, len, 0);
}
static int adi_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
{
u8 byte;
return adi_i2c_read(adap, chip, 0, 0, &byte, 1);
}
static struct twi_regs *i2c_get_base(struct i2c_adapter *adap)
{
switch (adap->hwadapnr) {
#if CONFIG_SYS_MAX_I2C_BUS > 2
case 2:
return (struct twi_regs *)TWI2_CLKDIV;
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 1
case 1:
return (struct twi_regs *)TWI1_CLKDIV;
#endif
case 0:
return (struct twi_regs *)TWI0_CLKDIV;
default:
printf("wrong hwadapnr: %d\n", adap->hwadapnr);
}
return NULL;
}
U_BOOT_I2C_ADAP_COMPLETE(adi_i2c0, adi_i2c_init, adi_i2c_probe,
adi_i2c_read, adi_i2c_write,
adi_i2c_setspeed,
CONFIG_SYS_I2C_SPEED,
0,
0)
#if CONFIG_SYS_MAX_I2C_BUS > 1
U_BOOT_I2C_ADAP_COMPLETE(adi_i2c1, adi_i2c_init, adi_i2c_probe,
adi_i2c_read, adi_i2c_write,
adi_i2c_setspeed,
CONFIG_SYS_I2C_SPEED,
0,
1)
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 2
U_BOOT_I2C_ADAP_COMPLETE(adi_i2c2, adi_i2c_init, adi_i2c_probe,
adi_i2c_read, adi_i2c_write,
adi_i2c_setspeed,
CONFIG_SYS_I2C_SPEED,
0,
2)
#endif
|
