1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2008
* Gururaja Hebbar gururajakr@sanyo.co.in
*
* reference linux-2.6.20.6/drivers/rtc/rtc-pl031.c
*/
#include <common.h>
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
#ifndef CONFIG_SYS_RTC_PL031_BASE
#error CONFIG_SYS_RTC_PL031_BASE is not defined!
#endif
/*
* Register definitions
*/
#define RTC_DR 0x00 /* Data read register */
#define RTC_MR 0x04 /* Match register */
#define RTC_LR 0x08 /* Data load register */
#define RTC_CR 0x0c /* Control register */
#define RTC_IMSC 0x10 /* Interrupt mask and set register */
#define RTC_RIS 0x14 /* Raw interrupt status register */
#define RTC_MIS 0x18 /* Masked interrupt status register */
#define RTC_ICR 0x1c /* Interrupt clear register */
#define RTC_CR_START (1 << 0)
#define RTC_WRITE_REG(addr, val) \
(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
#define RTC_READ_REG(addr) \
(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
static int pl031_initted = 0;
/* Enable RTC Start in Control register*/
void rtc_init(void)
{
RTC_WRITE_REG(RTC_CR, RTC_CR_START);
pl031_initted = 1;
}
/*
* Reset the RTC. We set the date back to 1970-01-01.
*/
void rtc_reset(void)
{
RTC_WRITE_REG(RTC_LR, 0x00);
if(!pl031_initted)
rtc_init();
}
/*
* Set the RTC
*/
int rtc_set(struct rtc_time *tmp)
{
unsigned long tim;
if(!pl031_initted)
rtc_init();
if (tmp == NULL) {
puts("Error setting the date/time\n");
return -1;
}
/* Calculate number of seconds this incoming time represents */
tim = rtc_mktime(tmp);
RTC_WRITE_REG(RTC_LR, tim);
return -1;
}
/*
* Get the current time from the RTC
*/
int rtc_get(struct rtc_time *tmp)
{
ulong tim;
if(!pl031_initted)
rtc_init();
if (tmp == NULL) {
puts("Error getting the date/time\n");
return -1;
}
tim = RTC_READ_REG(RTC_DR);
rtc_to_tm(tim, tmp);
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return 0;
}
#endif
|
