1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
*
* Modified to add device model (DM) support
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
*
* Modified to add DM and fdt support, removed non DM code
* (C) Copyright 2018 Angelo Dureghello <angelo@sysam.it>
*/
/*
* Minimal serial functions needed to use one of the uart ports
* as serial console interface.
*/
#include <common.h>
#include <dm.h>
#include <dm/platform_data/serial_coldfire.h>
#include <serial.h>
#include <linux/compiler.h>
#include <asm/immap.h>
#include <asm/uart.h>
DECLARE_GLOBAL_DATA_PTR;
extern void uart_port_conf(int port);
static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate)
{
u32 counter;
uart_port_conf(port_idx);
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
writeb(UART_UCR_RESET_RX, &uart->ucr);
writeb(UART_UCR_RESET_TX, &uart->ucr);
writeb(UART_UCR_RESET_ERROR, &uart->ucr);
writeb(UART_UCR_RESET_MR, &uart->ucr);
__asm__("nop");
writeb(0, &uart->uimr);
/* write to CSR: RX/TX baud rate from timers */
writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr);
writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr);
writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr);
/* Setting up BaudRate */
counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
counter = counter / baudrate;
/* write to CTUR: divide counter upper byte */
writeb((u8)((counter & 0xff00) >> 8), &uart->ubg1);
/* write to CTLR: divide counter lower byte */
writeb((u8)(counter & 0x00ff), &uart->ubg2);
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
return (0);
}
static void mcf_serial_setbrg_common(uart_t *uart, int baudrate)
{
u32 counter;
/* Setting up BaudRate */
counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
counter = counter / baudrate;
/* write to CTUR: divide counter upper byte */
writeb(((counter & 0xff00) >> 8), &uart->ubg1);
/* write to CTLR: divide counter lower byte */
writeb((counter & 0x00ff), &uart->ubg2);
writeb(UART_UCR_RESET_RX, &uart->ucr);
writeb(UART_UCR_RESET_TX, &uart->ucr);
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
}
static int coldfire_serial_probe(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev->plat;
plat->port = dev->seq;
return mcf_serial_init_common((uart_t *)plat->base,
plat->port, plat->baudrate);
}
static int coldfire_serial_putc(struct udevice *dev, const char ch)
{
struct coldfire_serial_platdata *plat = dev->plat;
uart_t *uart = (uart_t *)plat->base;
/* Wait for last character to go. */
if (!(readb(&uart->usr) & UART_USR_TXRDY))
return -EAGAIN;
writeb(ch, &uart->utb);
return 0;
}
static int coldfire_serial_getc(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev->plat;
uart_t *uart = (uart_t *)(plat->base);
/* Wait for a character to arrive. */
if (!(readb(&uart->usr) & UART_USR_RXRDY))
return -EAGAIN;
return readb(&uart->urb);
}
int coldfire_serial_setbrg(struct udevice *dev, int baudrate)
{
struct coldfire_serial_platdata *plat = dev->plat;
uart_t *uart = (uart_t *)(plat->base);
mcf_serial_setbrg_common(uart, baudrate);
return 0;
}
static int coldfire_serial_pending(struct udevice *dev, bool input)
{
struct coldfire_serial_platdata *plat = dev->plat;
uart_t *uart = (uart_t *)(plat->base);
if (input)
return readb(&uart->usr) & UART_USR_RXRDY ? 1 : 0;
else
return readb(&uart->usr) & UART_USR_TXRDY ? 0 : 1;
return 0;
}
static int coldfire_ofdata_to_platdata(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr_base;
addr_base = dev_read_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -ENODEV;
plat->base = (uint32_t)addr_base;
plat->baudrate = gd->baudrate;
return 0;
}
static const struct dm_serial_ops coldfire_serial_ops = {
.putc = coldfire_serial_putc,
.pending = coldfire_serial_pending,
.getc = coldfire_serial_getc,
.setbrg = coldfire_serial_setbrg,
};
static const struct udevice_id coldfire_serial_ids[] = {
{ .compatible = "fsl,mcf-uart" },
{ }
};
U_BOOT_DRIVER(serial_coldfire) = {
.name = "serial_coldfire",
.id = UCLASS_SERIAL,
.of_match = coldfire_serial_ids,
.ofdata_to_platdata = coldfire_ofdata_to_platdata,
.plat_auto = sizeof(struct coldfire_serial_platdata),
.probe = coldfire_serial_probe,
.ops = &coldfire_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
|
