1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
// SPDX-License-Identifier: GPL-2.0+
/*
* LPC32xx SSP interface (SPI mode)
*
* (C) Copyright 2014 DENX Software Engineering GmbH
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
*/
#include <common.h>
#include <linux/compat.h>
#include <asm/io.h>
#include <malloc.h>
#include <spi.h>
#include <asm/arch/clk.h>
/* SSP chip registers */
struct ssp_regs {
u32 cr0;
u32 cr1;
u32 data;
u32 sr;
u32 cpsr;
u32 imsc;
u32 ris;
u32 mis;
u32 icr;
u32 dmacr;
};
/* CR1 register defines */
#define SSP_CR1_SSP_ENABLE 0x0002
/* SR register defines */
#define SSP_SR_TNF 0x0002
/* SSP status RX FIFO not empty bit */
#define SSP_SR_RNE 0x0004
/* lpc32xx spi slave */
struct lpc32xx_spi_slave {
struct spi_slave slave;
struct ssp_regs *regs;
};
static inline struct lpc32xx_spi_slave *to_lpc32xx_spi_slave(
struct spi_slave *slave)
{
return container_of(slave, struct lpc32xx_spi_slave, slave);
}
/* the following is called in sequence by do_spi_xfer() */
struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode)
{
struct lpc32xx_spi_slave *lslave;
/* we only set up SSP0 for now, so ignore bus */
if (mode & SPI_3WIRE) {
pr_err("3-wire mode not supported");
return NULL;
}
if (mode & SPI_SLAVE) {
pr_err("slave mode not supported\n");
return NULL;
}
if (mode & SPI_PREAMBLE) {
pr_err("preamble byte skipping not supported\n");
return NULL;
}
lslave = spi_alloc_slave(struct lpc32xx_spi_slave, bus, cs);
if (!lslave) {
printf("SPI_error: Fail to allocate lpc32xx_spi_slave\n");
return NULL;
}
lslave->regs = (struct ssp_regs *)SSP0_BASE;
/*
* 8 bit frame, SPI fmt, 500kbps -> clock divider is 26.
* Set SCR to 0 and CPSDVSR to 26.
*/
writel(0x7, &lslave->regs->cr0); /* 8-bit chunks, SPI, 1 clk/bit */
writel(26, &lslave->regs->cpsr); /* SSP clock = HCLK/26 = 500kbps */
writel(0, &lslave->regs->imsc); /* do not raise any interrupts */
writel(0, &lslave->regs->icr); /* clear any pending interrupt */
writel(0, &lslave->regs->dmacr); /* do not do DMAs */
writel(SSP_CR1_SSP_ENABLE, &lslave->regs->cr1); /* enable SSP0 */
return &lslave->slave;
}
void spi_free_slave(struct spi_slave *slave)
{
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
debug("(lpc32xx) spi_free_slave: 0x%08x\n", (u32)lslave);
free(lslave);
}
int spi_claim_bus(struct spi_slave *slave)
{
/* only one bus and slave so far, always available */
return 0;
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
int bytelen = bitlen >> 3;
int idx_out = 0;
int idx_in = 0;
int start_time;
start_time = get_timer(0);
while ((idx_out < bytelen) || (idx_in < bytelen)) {
int status = readl(&lslave->regs->sr);
if ((idx_out < bytelen) && (status & SSP_SR_TNF))
writel(((u8 *)dout)[idx_out++], &lslave->regs->data);
if ((idx_in < bytelen) && (status & SSP_SR_RNE))
((u8 *)din)[idx_in++] = readl(&lslave->regs->data);
if (get_timer(start_time) >= CONFIG_LPC32XX_SSP_TIMEOUT)
return -1;
}
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
/* do nothing */
}
|
