1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 STMicroelectronics - All Rights Reserved
* Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
* Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
*
* This rm68200 panel driver is inspired from the Linux Kernel driver
* drivers/gpu/drm/panel/panel-raydium-rm68200.c.
*/
#include <common.h>
#include <backlight.h>
#include <dm.h>
#include <mipi_dsi.h>
#include <panel.h>
#include <asm/gpio.h>
#include <dm/device_compat.h>
#include <linux/delay.h>
#include <power/regulator.h>
/*** Manufacturer Command Set ***/
#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */
#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
/* CMD2 P0 commands (Display Options and Power) */
#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */
#define MCS_SGOPCTR 0x16 /* Source Bias Current */
#define MCS_SDCTR 0x1A /* Source Output Delay Time */
#define MCS_INVCTR 0x1B /* Inversion Type */
#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */
#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */
#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */
#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */
#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */
#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */
#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */
#define MCS_SETVGN 0x52 /* VG M/S N Control */
#define MCS_SETVGP 0x54 /* VG M/S P Control */
#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */
/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
#define GOA_VSTV1 0x00
#define GOA_VSTV2 0x07
#define GOA_VCLK1 0x0E
#define GOA_VCLK2 0x17
#define GOA_VCLK_OPT1 0x20
#define GOA_BICLK1 0x2A
#define GOA_BICLK2 0x37
#define GOA_BICLK3 0x44
#define GOA_BICLK4 0x4F
#define GOA_BICLK_OPT1 0x5B
#define GOA_BICLK_OPT2 0x60
#define MCS_GOA_GPO1 0x6D
#define MCS_GOA_GPO2 0x71
#define MCS_GOA_EQ 0x74
#define MCS_GOA_CLK_GALLON 0x7C
#define MCS_GOA_FS_SEL0 0x7E
#define MCS_GOA_FS_SEL1 0x87
#define MCS_GOA_FS_SEL2 0x91
#define MCS_GOA_FS_SEL3 0x9B
#define MCS_GOA_BS_SEL0 0xAC
#define MCS_GOA_BS_SEL1 0xB5
#define MCS_GOA_BS_SEL2 0xBF
#define MCS_GOA_BS_SEL3 0xC9
#define MCS_GOA_BS_SEL4 0xD3
/* CMD2 P3 commands (Gamma) */
#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */
#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */
struct rm68200_panel_priv {
struct udevice *reg;
struct udevice *backlight;
struct gpio_desc reset;
unsigned int lanes;
enum mipi_dsi_pixel_format format;
unsigned long mode_flags;
};
static const struct display_timing default_timing = {
.pixelclock.typ = 54000000,
.hactive.typ = 720,
.hfront_porch.typ = 48,
.hback_porch.typ = 48,
.hsync_len.typ = 9,
.vactive.typ = 1280,
.vfront_porch.typ = 12,
.vback_porch.typ = 12,
.vsync_len.typ = 5,
};
static void rm68200_dcs_write_buf(struct udevice *dev, const void *data,
size_t len)
{
struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
struct mipi_dsi_device *device = plat->device;
int err;
err = mipi_dsi_dcs_write_buffer(device, data, len);
if (err < 0)
dev_err(dev, "MIPI DSI DCS write buffer failed: %d\n", err);
}
static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value)
{
struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
struct mipi_dsi_device *device = plat->device;
int err;
err = mipi_dsi_dcs_write(device, cmd, &value, 1);
if (err < 0)
dev_err(dev, "MIPI DSI DCS write failed: %d\n", err);
}
#define dcs_write_seq(ctx, seq...) \
({ \
static const u8 d[] = { seq }; \
\
rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
})
/*
* This panel is not able to auto-increment all cmd addresses so for some of
* them, we need to send them one by one...
*/
#define dcs_write_cmd_seq(ctx, cmd, seq...) \
({ \
static const u8 d[] = { seq }; \
unsigned int i; \
\
for (i = 0; i < ARRAY_SIZE(d) ; i++) \
rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \
})
static void rm68200_init_sequence(struct udevice *dev)
{
/* Enter CMD2 with page 0 */
dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0);
dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
dcs_write_seq(dev, MCS_BT2CTR, 0xE5);
dcs_write_seq(dev, MCS_SETAVDD, 0x0A);
dcs_write_seq(dev, MCS_SETAVEE, 0x0A);
dcs_write_seq(dev, MCS_SGOPCTR, 0x52);
dcs_write_seq(dev, MCS_BT3CTR, 0x53);
dcs_write_seq(dev, MCS_BT4CTR, 0x5A);
dcs_write_seq(dev, MCS_INVCTR, 0x00);
dcs_write_seq(dev, MCS_STBCTR, 0x0A);
dcs_write_seq(dev, MCS_SDCTR, 0x06);
dcs_write_seq(dev, MCS_VCMCTR, 0x56);
dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00);
dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00);
dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2);
dcs_write_seq(dev, GOA_VSTV1, 0x05);
dcs_write_seq(dev, 0x02, 0x0B);
dcs_write_seq(dev, 0x03, 0x0F);
dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50);
dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
0x50);
dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
0x00, 0x85, 0x08);
dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
0x00, 0x85, 0x08);
dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00);
dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08);
dcs_write_seq(dev, 0x2D, 0x01);
dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
0x00);
dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
dcs_write_seq(dev, 0x3D, 0x40);
dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00);
dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00);
dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00);
dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
0x00, 0x00);
dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00);
dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
0x16, 0x12, 0x08, 0x3F);
dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
0x0A, 0x0E, 0x3F, 0x3F, 0x00);
dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
0x05, 0x01, 0x3F, 0x3F, 0x0F);
dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
0x3F);
dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F);
dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
0x15, 0x11, 0x0F, 0x3F);
dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
0x0D, 0x09, 0x3F, 0x3F, 0x07);
dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
0x02, 0x06, 0x3F, 0x3F, 0x08);
dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x0E, 0x10, 0x14);
dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
dcs_write_seq(dev, 0xDC, 0x02);
dcs_write_seq(dev, 0xDE, 0x12);
dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
dcs_write_seq(dev, 0x01, 0x75);
dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3);
dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
0x12, 0x0C, 0x00);
dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
0x12, 0x0C, 0x00);
/* Exit CMD2 */
dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
}
static int rm68200_panel_enable_backlight(struct udevice *dev)
{
struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
struct mipi_dsi_device *device = plat->device;
struct rm68200_panel_priv *priv = dev_get_priv(dev);
int ret;
ret = mipi_dsi_attach(device);
if (ret < 0)
return ret;
rm68200_init_sequence(dev);
ret = mipi_dsi_dcs_exit_sleep_mode(device);
if (ret)
return ret;
mdelay(125);
ret = mipi_dsi_dcs_set_display_on(device);
if (ret)
return ret;
mdelay(20);
ret = backlight_enable(priv->backlight);
if (ret)
return ret;
return 0;
}
static int rm68200_panel_get_display_timing(struct udevice *dev,
struct display_timing *timings)
{
struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
struct mipi_dsi_device *device = plat->device;
struct rm68200_panel_priv *priv = dev_get_priv(dev);
memcpy(timings, &default_timing, sizeof(*timings));
/* fill characteristics of DSI data link */
device->lanes = priv->lanes;
device->format = priv->format;
device->mode_flags = priv->mode_flags;
return 0;
}
static int rm68200_panel_ofdata_to_platdata(struct udevice *dev)
{
struct rm68200_panel_priv *priv = dev_get_priv(dev);
int ret;
if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
ret = device_get_supply_regulator(dev, "power-supply",
&priv->reg);
if (ret && ret != -ENOENT) {
dev_err(dev, "Warning: cannot get power supply\n");
return ret;
}
}
ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
GPIOD_IS_OUT);
if (ret) {
dev_err(dev, "Warning: cannot get reset GPIO\n");
if (ret != -ENOENT)
return ret;
}
ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
"backlight", &priv->backlight);
if (ret) {
dev_err(dev, "Cannot get backlight: ret=%d\n", ret);
return ret;
}
return 0;
}
static int rm68200_panel_probe(struct udevice *dev)
{
struct rm68200_panel_priv *priv = dev_get_priv(dev);
int ret;
if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
ret = regulator_set_enable(priv->reg, true);
if (ret)
return ret;
}
/* reset panel */
dm_gpio_set_value(&priv->reset, true);
mdelay(1);
dm_gpio_set_value(&priv->reset, false);
mdelay(10);
priv->lanes = 2;
priv->format = MIPI_DSI_FMT_RGB888;
priv->mode_flags = MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM;
return 0;
}
static const struct panel_ops rm68200_panel_ops = {
.enable_backlight = rm68200_panel_enable_backlight,
.get_display_timing = rm68200_panel_get_display_timing,
};
static const struct udevice_id rm68200_panel_ids[] = {
{ .compatible = "raydium,rm68200" },
{ }
};
U_BOOT_DRIVER(rm68200_panel) = {
.name = "rm68200_panel",
.id = UCLASS_PANEL,
.of_match = rm68200_panel_ids,
.ops = &rm68200_panel_ops,
.ofdata_to_platdata = rm68200_panel_ofdata_to_platdata,
.probe = rm68200_panel_probe,
.platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
.priv_auto_alloc_size = sizeof(struct rm68200_panel_priv),
};
|
