1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
maintainers:
- Biju Das <biju.das.jz@bp.renesas.com>
allOf:
- $ref: dai-common.yaml#
properties:
compatible:
items:
- enum:
- renesas,r9a07g043-ssi # RZ/G2UL
- renesas,r9a07g044-ssi # RZ/G2{L,LC}
- renesas,r9a07g054-ssi # RZ/V2L
- const: renesas,rz-ssi
reg:
maxItems: 1
interrupts:
minItems: 2
maxItems: 3
interrupt-names:
oneOf:
- items:
- const: int_req
- const: dma_rx
- const: dma_tx
- items:
- const: int_req
- const: dma_rt
clocks:
maxItems: 4
clock-names:
items:
- const: ssi
- const: ssi_sfr
- const: audio_clk1
- const: audio_clk2
power-domains:
maxItems: 1
resets:
maxItems: 1
dmas:
minItems: 1
maxItems: 2
description:
The first cell represents a phandle to dmac.
The second cell specifies the encoded MID/RID values of the SSI port
connected to the DMA client and the slave channel configuration
parameters.
bits[0:9] - Specifies MID/RID value of a SSI channel as below
MID/RID value of SSI rx0 = 0x256
MID/RID value of SSI tx0 = 0x255
MID/RID value of SSI rx1 = 0x25a
MID/RID value of SSI tx1 = 0x259
MID/RID value of SSI rt2 = 0x25f
MID/RID value of SSI rx3 = 0x262
MID/RID value of SSI tx3 = 0x261
bit[10] - HIEN = 1, Detects a request in response to the rising edge
of the signal
bit[11] - LVL = 0, Detects based on the edge
bits[12:14] - AM = 2, Bus cycle mode
bit[15] - TM = 0, Single transfer mode
dma-names:
oneOf:
- items:
- const: tx
- const: rx
- items:
- const: rt
'#sound-dai-cells':
const: 0
required:
- compatible
- reg
- interrupts
- interrupt-names
- clocks
- clock-names
- resets
- '#sound-dai-cells'
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r9a07g044-cpg.h>
ssi0: ssi@10049c00 {
compatible = "renesas,r9a07g044-ssi",
"renesas,rz-ssi";
reg = <0x10049c00 0x400>;
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "int_req", "dma_rx", "dma_tx";
clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
<&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
<&audio_clk1>,
<&audio_clk2>;
clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
power-domains = <&cpg>;
resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
dmas = <&dmac 0x2655>,
<&dmac 0x2656>;
dma-names = "tx", "rx";
#sound-dai-cells = <0>;
};
|
