1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP USB2 ChipIdea USB controller
maintainers:
- Xu Yang <xu.yang_2@nxp.com>
properties:
compatible:
oneOf:
- enum:
- fsl,imx27-usb
- items:
- enum:
- fsl,imx23-usb
- fsl,imx25-usb
- fsl,imx28-usb
- fsl,imx35-usb
- fsl,imx50-usb
- fsl,imx51-usb
- fsl,imx53-usb
- fsl,imx6q-usb
- fsl,imx6sl-usb
- fsl,imx6sx-usb
- fsl,imx6ul-usb
- fsl,imx7d-usb
- fsl,vf610-usb
- const: fsl,imx27-usb
- items:
- enum:
- fsl,imx8dxl-usb
- fsl,imx8ulp-usb
- const: fsl,imx7ulp-usb
- const: fsl,imx6ul-usb
- items:
- enum:
- fsl,imx8mm-usb
- fsl,imx8mn-usb
- fsl,imx93-usb
- const: fsl,imx7d-usb
- const: fsl,imx27-usb
- items:
- enum:
- fsl,imx6sll-usb
- fsl,imx7ulp-usb
- const: fsl,imx6ul-usb
- const: fsl,imx27-usb
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 1
maxItems: 3
clock-names:
minItems: 1
maxItems: 3
fsl,usbmisc:
description:
Phandler of non-core register device, with one argument that
indicate usb controller index
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to usbmisc node
- description: index of usb controller
disable-over-current:
type: boolean
description: disable over current detect
over-current-active-low:
type: boolean
description: over current signal polarity is active low
over-current-active-high:
type: boolean
description:
Over current signal polarity is active high. It's recommended to
specify the over current polarity.
power-active-high:
type: boolean
description: power signal polarity is active high
external-vbus-divider:
type: boolean
description: enables off-chip resistor divider for Vbus
samsung,picophy-pre-emp-curr-control:
description:
HS Transmitter Pre-Emphasis Current Control. This signal controls
the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
pins after a J-to-K or K-to-J transition. The range is from 0x0 to
0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
bits of USBNC_n_PHY_CFG1.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0x0
maximum: 0x3
samsung,picophy-dc-vol-level-adjust:
description:
HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
level voltage. The range is from 0x0 to 0xf, the default value is
0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0x0
maximum: 0xf
fsl,picophy-rise-fall-time-adjust:
description:
HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
of the high-speed transmitter waveform. It has no unit. The rise/fall
time will be increased or decreased by a certain percentage relative
to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 1
fsl,usbphy:
description: phandle of usb phy that connects to the port. Use "phys" instead.
$ref: /schemas/types.yaml#/definitions/phandle
deprecated: true
required:
- compatible
allOf:
- $ref: chipidea,usb2-common.yaml#
- if:
properties:
phy_type:
const: hsic
required:
- phy_type
then:
properties:
pinctrl-names:
items:
- const: idle
- const: active
# imx27 Soc needs three clocks
- if:
properties:
compatible:
const: fsl,imx27-usb
then:
properties:
clocks:
minItems: 3
clock-names:
items:
- const: ipg
- const: ahb
- const: per
# imx25 and imx35 Soc need three clocks
- if:
properties:
compatible:
contains:
enum:
- fsl,imx25-usb
- fsl,imx35-usb
then:
properties:
clocks:
minItems: 3
clock-names:
items:
- const: ipg
- const: ahb
- const: per
# imx93 Soc needs two clocks
- if:
properties:
compatible:
contains:
enum:
- fsl,imx93-usb
then:
properties:
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: usb_ctrl_root
- const: usb_wakeup
# imx7d Soc need one clock
- if:
properties:
compatible:
items:
- const: fsl,imx7d-usb
- const: fsl,imx27-usb
then:
properties:
clocks:
maxItems: 1
clock-names: false
# other Soc need one clock
- if:
properties:
compatible:
contains:
enum:
- fsl,imx23-usb
- fsl,imx28-usb
- fsl,imx50-usb
- fsl,imx51-usb
- fsl,imx53-usb
- fsl,imx6q-usb
- fsl,imx6sl-usb
- fsl,imx6sx-usb
- fsl,imx6ul-usb
- fsl,imx8mm-usb
- fsl,imx8mn-usb
- fsl,vf610-usb
then:
properties:
clocks:
maxItems: 1
clock-names: false
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imx7d-clock.h>
usb@30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
phy-clkgate-delay-us = <400>;
};
# Example for HSIC:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
usb@2184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
dr_mode = "host";
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
pinctrl-names = "idle", "active";
pinctrl-0 = <&pinctrl_usbh2_idle>;
pinctrl-1 = <&pinctrl_usbh2_active>;
#address-cells = <1>;
#size-cells = <0>;
ethernet@1 {
compatible = "usb424,9730";
reg = <1>;
};
};
...
|
