path: root/dts/upstream/src/arm64/freescale/imx8mm-emcon.dtsi

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright 2018 NXP
// Copyright (C) 2021 emtrion GmbH
//

/dts-v1/;

#include "imx8mm.dtsi"

/ {
	chosen {
		stdout-path = &uart1;
	};

	som_leds: leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_led>;

		led-green {
			label = "som:green";
			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};

		led-red {
			label = "som:red";
			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
	};

	lvds_backlight: lvds-backlight {
		compatible = "pwm-backlight";
		enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
		pwms = <&pwm1 0 50000 0>;
		brightness-levels = <
			0 4 8 16 32 64 80 96 112
			128 144 160 176 250
		>;
		default-brightness-level = <9>;
		status = "disabled";
	};

	reg_usdhc1_vmmc: regulator-emmc {
		compatible = "regulator-fixed";
		regulator-name = "eMMC";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		regulator-name = "sdcard_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};
};

&A53_0 {
	cpu-supply = <&buck2_reg>;
};

&ecspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
				<&gpio5 13 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy0>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
			reset-assert-us = <10000>;
		};
	};
};

&flexspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi0>;
	pinctrl-1 = <&pinctrl_flexspi1>;
	status = "okay";

	flash0: flash@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <40000000>;
	};
};

&iomuxc {
	pinctrl_csi_pwn: csi-pwn-grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
		>;
	};

	pinctrl_ecspi1: ecspi1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
		>;
	};

	pinctrl_ecspi1_cs: ecspi1cs-grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
		>;
	};

	pinctrl_fec1: fec1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC				0x3
			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO			0x3
			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9			0x19
		>;
	};

	pinctrl_flexspi0: flexspi0-grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82
		>;
	};

	pinctrl_flexspi1: flexspi1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK		0x1c2
			MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B	0x82
			MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0	0x82
			MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1	0x82
			MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2	0x82
			MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3	0x82
		>;
	};

	pinctrl_gpio_led: gpio-led-grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x19
			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
		>;
	};

	pinctrl_i2c1: i2c1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
		>;
	};

	pinctrl_i2c3: i2c3-grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
		>;
	};

	pinctrl_lvds: lvds-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x06
		>;
	};

	pinctrl_pcie0: pcie0-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x41
		>;
	};

	pinctrl_pmic: pmicirq-grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
		>;
	};

	pinctrl_pwm1: pwm1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x06
		>;
	};

	pinctrl_sai2: sai2-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
			MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
		>;
	};

	pinctrl_spdif1: spdif1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT		0xd6
			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN			0xd6
		>;
	};

	pinctrl_uart1: uart1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
		>;
	};

	pinctrl_uart2: uart2-grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140

			/* rts and cts */
			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
		>;
	};

	pinctrl_uart3: uart3-grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
		>;
	};

	pinctrl_uart4: uart4-grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x140
			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x140
		>;
	};

	pinctrl_usdhc1: usdhc1-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
		>;
	};

	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
		>;
	};

	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
		>;
	};

	pinctrl_usdhc1_gpio: usdhc1-gpio-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x41
			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c4
		>;
	};

	pinctrl_usdhc2: usdhc2-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};

	/* no reset for sdhc2 interface */
	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x1c4
		>;
	};

	pinctrl_wdog: wdog-grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
		>;
	};
};

&i2c1 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	bd71847: pmic@4b {
		compatible = "rohm,bd71847";
		reg = <0x4b>;
		pinctrl-0 = <&pinctrl_pmic>;
		interrupt-parent = <&gpio3>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		rohm,reset-snvs-powered;

		regulators {
			buck1_reg: BUCK1 {
				regulator-name = "buck1";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <1250>;
			};

			buck2_reg: BUCK2 {
				regulator-name = "buck2";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <1250>;
				rohm,dvs-run-voltage = <1000000>;
				rohm,dvs-idle-voltage = <900000>;
			};

			buck3_reg: BUCK3 {
				// BUCK5 in datasheet
				regulator-name = "buck3";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1350000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck4_reg: BUCK4 {
				// BUCK6 in datasheet
				regulator-name = "buck4";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck5_reg: BUCK5 {
				// BUCK7 in datasheet
				regulator-name = "buck5";
				regulator-min-microvolt = <1605000>;
				regulator-max-microvolt = <1995000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6_reg: BUCK6 {
				// BUCK8 in datasheet
				regulator-name = "buck6";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1_reg: LDO1 {
				regulator-name = "ldo1";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <1900000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo2_reg: LDO2 {
				regulator-name = "ldo2";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <900000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo3_reg: LDO3 {
				regulator-name = "ldo3";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4_reg: LDO4 {
				regulator-name = "ldo4";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo6_reg: LDO6 {
				regulator-name = "ldo6";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};

	rv1805: rtc@69 {
		compatible = "abracon,ab1805";
		reg = <0x69>;
	};
};

&mu {
	status = "okay";
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
};

&sai2 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai2>;
	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <12000000>;
	status = "disabled";
};

&spdif1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spdif1>;
	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <24576000>;
	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
	status = "disabled";
};

&uart1 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	status = "okay";
};

&usbotg1 {
	dr_mode = "otg";
	over-current-active-low;
	status = "okay";
};

&usbotg2 {
	dr_mode = "host";
	disable-over-current;
	status = "disabled";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
	bus-width = <8>;
	vmmc-supply = <&reg_usdhc1_vmmc>;
	keep-power-in-suspend;
	non-removable;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
	bus-width = <4>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	no-1-8-v;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	fsl,ext-reset-output;
	status = "okay";
};