blob: 0b90367b6d1e3138fd03fef3d455c9303975e316 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Device Tree Source for the RZ/G2LC SMARC EVK board
*
* Copyright (C) 2021 Renesas Electronics Corp.
*/
/dts-v1/;
/*
* DIP-Switch SW1 setting on SoM
* 1 : High; 0: Low
* SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD)
* SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1)
* SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1)
* SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0)
* Please change below macros according to SW1 setting
*/
#define SW_SD0_DEV_SEL 1
#define SW_SCIF_CAN 0
#if (SW_SCIF_CAN)
/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
#define SW_RSPI_CAN 0
#else
/* Please set SW_RSPI_CAN. Default value is 1 */
#define SW_RSPI_CAN 1
#endif
#if (SW_SCIF_CAN && SW_RSPI_CAN)
#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
#endif
/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
#define PMOD1_SER0 1
/*
* To enable MTU3a PWM on PMOD0,
* - Set DIP-Switch SW1-4 to Off position.
* - Set SW_RSPI_CAN macro to 0.
* - Set PMOD_MTU3 macro to 1.
*/
#define PMOD_MTU3 0
#if (PMOD_MTU3 && SW_RSPI_CAN)
#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive"
#endif
#include "r9a07g044c2.dtsi"
#include "rzg2lc-smarc-som.dtsi"
#include "rzg2lc-smarc.dtsi"
/ {
model = "Renesas SMARC EVK based on r9a07g044c2";
compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
};
|
