1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) Siemens AG, 2018-2023
*
* Authors:
* Chao Zeng <chao.zeng@siemens.com>
* Jan Kiszka <jan.kiszka@siemens.com>
*
* AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product
* Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
*
* Product homepage:
* https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
*/
#include "k3-am6548-iot2050-advanced-common.dtsi"
#include "k3-am65-iot2050-common-pg2.dtsi"
#include "k3-am65-iot2050-arduino-connector.dtsi"
#include "k3-am65-iot2050-dp.dtsi"
/ {
compatible = "siemens,iot2050-advanced-m2", "ti,am654";
model = "SIMATIC IOT2050 Advanced M2";
};
&main_pmx0 {
main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */
>;
};
main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */
AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */
>;
};
main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */
AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */
AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7) /* (AF19) GPIO0_89 */
>;
};
};
&main_pmx1 {
main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */
AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */
>;
};
};
&main_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&main_m2_pcie_mux_control>;
};
&main_gpio1 {
pinctrl-names = "default";
pinctrl-0 =
<&main_pcie_enable_pins_default>,
<&main_pmx0_m2_config_pins_default>,
<&main_pmx1_m2_config_pins_default>,
<&cp2102n_reset_pin_default>;
};
/*
* Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only.
* Firmware switches to other modes via device tree overlays.
*/
&serdes0 {
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
};
&pcie0_rc {
pinctrl-names = "default";
pinctrl-0 = <&main_bkey_pcie_reset>;
num-lanes = <2>;
phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
phy-names = "pcie-phy0","pcie-phy1";
reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie1_rc {
status = "disabled";
};
|
