blob: 8f35a7bf3dc691e432154b9ac6608012a38c0961 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
/*
* (C) Copyright 2013-2015
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA210_COMMON_H_
#define _TEGRA210_COMMON_H_
#include "tegra-common.h"
/* Cortex-A57 uses a cache line size of 64 bytes */
#define CONFIG_SYS_CACHELINE_SIZE 64
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
/*
* Miscellaneous configurable options
*/
#define CONFIG_STACKBASE 0x82800000 /* 40MB */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_SYS_TEXT_BASE 0x80110000
/* Generic Interrupt Controller */
#define CONFIG_GICV2
/*
* Memory layout for where various images get loaded by boot scripts:
*
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* pxefile_addr_r can be pretty much anywhere that doesn't conflict with
* something else. Put it above BOOTMAPSZ to eliminate conflicts.
*
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
* should not overlap that area, or the kernel will have to copy itself
* somewhere else before decompression. Similarly, the address of any other
* data passed to the kernel shouldn't overlap the start of RAM. Pushing
* this up to 16M allows for a sizable kernel to be decompressed below the
* compressed load address.
*
* fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
* the compressed kernel to be up to 16M too.
*
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
#define CONFIG_LOADADDR 0x80080000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"fdt_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x82100000\0"
/* Defines for SPL */
#define CONFIG_SPL_TEXT_BASE 0x80108000
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
/* GPU needs setup */
#define CONFIG_TEGRA_GPU
#endif /* _TEGRA210_COMMON_H_ */
|
