Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board

15 files changed, 1221 insertions, 252 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1d6367a3bf3..7fbd0a1d06a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -537,7 +537,8 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 	vf610-bk4r1.dtb
 
 dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
-	imx53-kp.dtb
+	imx53-kp.dtb \
+	imx53-m53menlo.dtb
 
 dtb-$(CONFIG_MX6Q) += \
 	imx6-apalis.dtb \
diff --git a/arch/arm/dts/imx53-m53.dtsi b/arch/arm/dts/imx53-m53.dtsi
new file mode 100644
index 00000000000..fe5e0d308e9
--- /dev/null
+++ b/arch/arm/dts/imx53-m53.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx53-m53menlo-u-boot.dtsi b/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
new file mode 100644
index 00000000000..329fa3b5e27
--- /dev/null
+++ b/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+
+		aips@50000000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio5 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio6 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio7 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/imx53-m53menlo.dts b/arch/arm/dts/imx53-m53menlo.dts
new file mode 100644
index 00000000000..a6805eca9d0
--- /dev/null
+++ b/arch/arm/dts/imx53-m53menlo.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+#include "imx53-m53menlo-u-boot.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm070080dh6";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+				MX53_PAD_EIM_EB3__GPIO2_31		0x1d5
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x1d5
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1d5
+				MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK	0x1d5
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1d5
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1d5
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1d5
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1d5
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1d5
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1d5
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1d5
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1d5
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1d5
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1d5
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1d5
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1c4
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1d5 /* Interrupt */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1d5 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1d5 /* Wake */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			/* LVDS pins only have pin mux configuration */
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x1d5
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1d5
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 211ff5f69ef..ed341cfd9d0 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -1,17 +1,8 @@
-/*
- * Copyright 2016 Beckhoff Automation
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
 #include "imx53-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -19,8 +10,17 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
-		serial1 = &uart2;
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -36,7 +36,45 @@
 		mmc1 = &esdhc2;
 		mmc2 = &esdhc3;
 		mmc3 = &esdhc4;
-		usb1 = &usbh1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
 	};
 
 	tzic: tz-interrupt-controller@fffc000 {
@@ -46,13 +84,143 @@
 		reg = <0x0fffc000 0x4000>;
 	};
 
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
-		u-boot,dm-pre-reloc;
+
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
 
 		aips@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
@@ -92,6 +260,47 @@
 					status = "disabled";
 				};
 
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
 				esdhc3: esdhc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
@@ -117,25 +326,18 @@
 				};
 			};
 
-			iomuxc: iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
 			};
 
-			uart2: serial@53fc0000 {
-				compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
-				dma-names = "rx", "tx";
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
 			};
 
@@ -144,15 +346,37 @@
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
 				dr_mode = "host";
 				status = "disabled";
 			};
 
-			clks: ccm@53fd4000{
-				compatible = "fsl,imx53-ccm";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 			};
 
 			gpio1: gpio@53f84000 {
@@ -195,6 +419,188 @@
 				#interrupt-cells = <2>;
 			};
 
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@53f9c000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
 			gpio5: gpio@53fdc000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fdc000 0x4000>;
@@ -234,6 +640,18 @@
 				clocks = <&clks IMX5_CLK_I2C3_GATE>;
 				status = "disabled";
 			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
@@ -243,25 +661,74 @@
 			reg = <0x60000000 0x10000000>;
 			ranges;
 
+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
+			iim: iim@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
 			sdma: sdma@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			fec: ethernet@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -284,66 +751,65 @@
 				clocks = <&clks IMX5_CLK_I2C1_GATE>;
 				status = "disabled";
 			};
-		};
-
-		ipu: ipu@18000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x08000000>;
-			interrupts = <11 10>;
-			clocks = <&clks IMX5_CLK_IPU_GATE>,
-				 <&clks IMX5_CLK_IPU_DI0_GATE>,
-				 <&clks IMX5_CLK_IPU_DI1_GATE>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 2>;
-			u-boot,dm-pre-reloc;
 
-			ipu_csi0: port@0 {
-				reg = <0>;
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
 			};
 
-			ipu_csi1: port@1 {
-				reg = <1>;
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
 			};
 
-			ipu_di0: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				ipu_di0_disp0: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu_di0_lvds0: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&lvds0_in>;
-				};
+			nfc: nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
 			};
 
-			ipu_di1: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				ipu_di1_disp1: endpoint@0 {
-					reg = <0>;
-				};
-
-				ipu_di1_lvds1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&lvds1_in>;
-				};
+			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
 
-				ipu_di1_tve: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&tve_in>;
-				};
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
 			};
-		};
 
-		tve: tve@63ff0000 {
+			tve: tve@63ff0000 {
 				compatible = "fsl,imx53-tve";
 				reg = <0x63ff0000 0x1000>;
 				interrupts = <92>;
@@ -357,68 +823,33 @@
 						remote-endpoint = <&ipu_di1_tve>;
 					};
 				};
-		};
-
-		src: src@53fd0000 {
-				compatible = "fsl,imx53-src", "fsl,imx51-src";
-				reg = <0x53fd0000 0x4000>;
-				#reset-cells = <1>;
-		};
-
-		ldb: ldb@53fa8008 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-ldb";
-				reg = <0x53fa8008 0x4>;
-				gpr = <&gpr>;
-				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-					 <&clks IMX5_CLK_LDB_DI1_SEL>,
-					 <&clks IMX5_CLK_IPU_DI0_SEL>,
-					 <&clks IMX5_CLK_IPU_DI1_SEL>,
-					 <&clks IMX5_CLK_LDB_DI0_GATE>,
-					 <&clks IMX5_CLK_LDB_DI1_GATE>;
-				clock-names = "di0_pll", "di1_pll",
-					      "di0_sel", "di1_sel",
-					      "di0", "di1";
-				status = "disabled";
-
-				lvds-channel@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-
-						lvds0_in: endpoint {
-							remote-endpoint = <&ipu_di0_lvds0>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-					};
-				};
-
-				lvds-channel@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-					status = "disabled";
+			};
 
-					port@1 {
-						reg = <1>;
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
 
-						lvds1_in: endpoint {
-							remote-endpoint = <&ipu_di1_lvds1>;
-						};
-					};
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
 
-					port@2 {
-						reg = <2>;
-					};
-				};
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
 	};
 };
diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c
index d42a15e8772..24d16299e8d 100644
--- a/arch/arm/mach-imx/hab.c
+++ b/arch/arm/mach-imx/hab.c
@@ -17,7 +17,7 @@
 #define ALIGN_SIZE		0x1000
 #define MX6DQ_PU_IROM_MMU_EN_VAR	0x009024a8
 #define MX6DLS_PU_IROM_MMU_EN_VAR	0x00901dd0
-#define MX6SL_PU_IROM_MMU_EN_VAR	0x00900a18
+#define MX6SL_PU_IROM_MMU_EN_VAR	0x00901c60
 #define IS_HAB_ENABLED_BIT \
 	(is_soc_type(MXC_SOC_MX7ULP) ? 0x80000000 :	\
 	 (is_soc_type(MXC_SOC_MX7) ? 0x2000000 : 0x2))
diff --git a/board/menlo/m53menlo/m53menlo.c b/board/menlo/m53menlo/m53menlo.c
index 6bdd6d5b234..31ba44e452d 100644
--- a/board/menlo/m53menlo/m53menlo.c
+++ b/board/menlo/m53menlo/m53menlo.c
@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
@@ -28,6 +29,7 @@
 #include <spl.h>
 #include <splash.h>
 #include <usb/ehci-ci.h>
+#include <video_console.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -80,33 +82,6 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 }
 
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
-	if (port == 0) {
-		/* USB OTG PWRON */
-		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
-						    PAD_CTL_PKE |
-						    PAD_CTL_DSE_HIGH));
-		gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
-
-		/* USB OTG Over Current */
-		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
-	} else if (port == 1) {
-		/* USB Host PWRON */
-		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
-						    PAD_CTL_PKE |
-						    PAD_CTL_DSE_HIGH));
-		gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
-
-		/* USB Host Over Current */
-		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
-	}
-
-	return 0;
-}
-#endif
-
 static void setup_iomux_fec(void)
 {
 	static const iomux_v3_cfg_t fec_pads[] = {
@@ -150,44 +125,6 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = {
-	MMC_SDHC1_BASE_ADDR,
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
-	gpio_direction_input(IMX_GPIO_NR(1, 1));
-
-	return !gpio_get_value(IMX_GPIO_NR(1, 1));
-}
-
-#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-				 PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
-				 PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
-	static const iomux_v3_cfg_t sd1_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
-	};
-
-	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
 static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk)
 {
 	static struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
@@ -215,6 +152,8 @@ static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk)
 
 static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev)
 {
+	gpio_request(IMX_GPIO_NR(6, 0), "LCD");
+
 	/* For ETM0430G0DH6 model, this must be enabled before the clock. */
 	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
 
@@ -227,6 +166,8 @@ static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev)
 
 static void enable_lvds_etm0700g0dh6(struct display_info_t const *dev)
 {
+	gpio_request(IMX_GPIO_NR(6, 0), "LCD");
+
 	/*
 	 * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to
 	 * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
@@ -330,7 +271,6 @@ struct display_info_t const displays[] = {
 };
 
 size_t display_count = ARRAY_SIZE(displays);
-#endif
 
 #ifdef CONFIG_SPLASH_SCREEN
 static struct splash_location default_splash_locations[] = {
@@ -349,6 +289,50 @@ int splash_screen_prepare(void)
 }
 #endif
 
+int board_late_init(void)
+{
+#if defined(CONFIG_VIDEO_IPUV3)
+	struct udevice *dev;
+	int xpos, ypos, ret;
+	char *s;
+	void *dst;
+	ulong addr, len;
+
+	splash_get_pos(&xpos, &ypos);
+
+	s = env_get("splashimage");
+	if (!s)
+		return 0;
+
+	addr = simple_strtoul(s, NULL, 16);
+	dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
+	if (!dst)
+		return -ENOMEM;
+
+	ret = splash_screen_prepare();
+	if (ret < 0)
+		return ret;
+
+	len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+	ret = gunzip(dst + 2, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE - 2,
+		     (uchar *)addr, &len);
+	if (ret) {
+		printf("Error: no valid bmp or bmp.gz image at %lx\n", addr);
+		free(dst);
+		return ret;
+	}
+
+	ret = uclass_get_device(UCLASS_VIDEO, 0, &dev);
+	if (ret)
+		return ret;
+
+	ret = video_bmp_display(dev, (ulong)dst + 2, xpos, ypos, true);
+	if (ret)
+		return ret;
+#endif
+	return 0;
+}
+
 #define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
 
@@ -424,6 +408,8 @@ static void m53_set_clock(void)
 	const u32 dramclk = 400;
 	u32 cpuclk;
 
+	gpio_request(IMX_GPIO_NR(4, 0), "CPUCLK");
+
 	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
 					    PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
 	gpio_direction_input(IMX_GPIO_NR(4, 0));
diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README
index f21d8301cbe..6aa0d25af51 100644
--- a/board/technexion/pico-imx7d/README
+++ b/board/technexion/pico-imx7d/README
@@ -11,7 +11,7 @@ $ make mrproper
 $ make pico-imx7d_defconfig
 $ make
 
-This generates the SPL and u-boot.img binaries.
+This generates the SPL and u-boot-dtb.img binaries.
 
 1. Loading U-Boot via USB Serial Download Protocol
 
@@ -32,15 +32,15 @@ to use an externally powered USB hub between the board and the host computer.
 
 Open a terminal program such as minicom.
 
-Copy SPL and u-boot.img to the imx_usb_loader folder.
+Copy SPL and u-boot-dtb.img to the imx_usb_loader folder.
 
 Load the SPL binary via USB:
 
 $ sudo ./imx_usb SPL
 
-Load the u-boot.img binary via USB:
+Load the u-boot-dtb.img binary via USB:
 
-$ sudo ./imx_usb u-boot.img
+$ sudo ./imx_usb u-boot-dtb.img
 
 Then U-Boot starts and its messages appear in the console program.
 
@@ -55,11 +55,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool:
 
 => dfu 0 mmc 0
 
-Flash SPL and u-boot.img into the eMMC running the following commands on a PC:
+Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
 
 $ sudo dfu-util -D SPL -a spl
 
-$ sudo dfu-util -D u-boot.img -a u-boot
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
 
 Remove power from the pico board.
 
diff --git a/common/spl/spl_sdp.c b/common/spl/spl_sdp.c
index 7fc44049718..806bf1327ef 100644
--- a/common/spl/spl_sdp.c
+++ b/common/spl/spl_sdp.c
@@ -29,10 +29,14 @@ static int spl_sdp_load_image(struct spl_image_info *spl_image,
 		return -ENODEV;
 	}
 
-	/* This command typically does not return but jumps to an image */
-	sdp_handle(controller_index);
-	pr_err("SDP ended\n");
+	/*
+	 * This command either loads a legacy image, jumps and never returns,
+	 * or it loads a FIT image and returns it to be handled by the SPL
+	 * code.
+	 */
+	ret = spl_sdp_handle(controller_index, spl_image);
+	debug("SDP ended\n");
 
-	return -EINVAL;
+	return ret;
 }
 SPL_LOAD_IMAGE_METHOD("USB SDP", 0, BOOT_DEVICE_BOARD, spl_sdp_load_image);
diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index 0e5fa01fde2..5a1fbf52985 100644
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x71000000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_TARGET_M53MENLO=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -17,9 +18,8 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/menlo/m53menlo/imximage.cfg"
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttymxc0,115200"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_TEXT_BASE=0x70008000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_NAND_SUPPORT=y
@@ -27,11 +27,14 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -48,27 +51,37 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)"
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx53-m53menlo"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ8XXX=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX5=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_RTC_M41T62=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_MX5=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_IMX_WATCHDOG=y
 CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index ae97ab2b497..fab7ce6f97b 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -638,7 +638,20 @@ static u32 sdp_jump_imxheader(void *address)
 	return 0;
 }
 
-static void sdp_handle_in_ep(void)
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_SPL_LOAD_FIT
+static ulong sdp_fit_read(struct spl_load_info *load, ulong sector,
+			  ulong count, void *buf)
+{
+	debug("%s: sector %lx, count %lx, buf %lx\n",
+	      __func__, sector, count, (ulong)buf);
+	memcpy(buf, (void *)(load->dev + sector), count);
+	return count;
+}
+#endif
+#endif
+
+static void sdp_handle_in_ep(struct spl_image_info *spl_image)
 {
 	u8 *data = sdp_func->in_req->buf;
 	u32 status;
@@ -690,10 +703,25 @@ static void sdp_handle_in_ep(void)
 		/* If imx header fails, try some U-Boot specific headers */
 		if (status) {
 #ifdef CONFIG_SPL_BUILD
+			image_header_t *header =
+				sdp_ptr(sdp_func->jmp_address);
+#ifdef CONFIG_SPL_LOAD_FIT
+			if (image_get_magic(header) == FDT_MAGIC) {
+				struct spl_load_info load;
+
+				debug("Found FIT\n");
+				load.dev = header;
+				load.bl_len = 1;
+				load.read = sdp_fit_read;
+				spl_load_simple_fit(spl_image, &load, 0,
+						    header);
+
+				return;
+			}
+#endif
 			/* In SPL, allow jumps to U-Boot images */
 			struct spl_image_info spl_image = {};
-			spl_parse_image_header(&spl_image,
-				(struct image_header *)sdp_func->jmp_address);
+			spl_parse_image_header(&spl_image, header);
 			jump_to_image_no_args(&spl_image);
 #else
 			/* In U-Boot, allow jumps to scripts */
@@ -715,19 +743,32 @@ static void sdp_handle_in_ep(void)
 	};
 }
 
-void sdp_handle(int controller_index)
+#ifndef CONFIG_SPL_BUILD
+int sdp_handle(int controller_index)
+#else
+int spl_sdp_handle(int controller_index, struct spl_image_info *spl_image)
+#endif
 {
 	printf("SDP: handle requests...\n");
 	while (1) {
 		if (ctrlc()) {
 			puts("\rCTRL+C - Operation aborted.\n");
-			return;
+			return -EINVAL;
 		}
 
+#ifdef CONFIG_SPL_BUILD
+		if (spl_image->flags & SPL_FIT_FOUND)
+			return 0;
+#endif
+
 		WATCHDOG_RESET();
 		usb_gadget_handle_interrupts(controller_index);
 
-		sdp_handle_in_ep();
+#ifdef CONFIG_SPL_BUILD
+		sdp_handle_in_ep(spl_image);
+#else
+		sdp_handle_in_ep(NULL);
+#endif
 	}
 }
 
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 4b0a3fb26b3..db37fa7b731 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -58,6 +58,7 @@
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
+#define PHY_ANEG_TIMEOUT		15000 /* PHY needs longer aneg time */
 #define CONFIG_FEC_MXC_PHYADDR		6
 #define CONFIG_TFTP_TSIZE
 
@@ -121,8 +122,8 @@
 	"imx6q-apalis-cam-eval.dtb fat 0 1"
 
 #define EMMC_BOOTCMD \
-	"set_emmcargs emmcargs ip=off root=PARTUUID=${uuid} ro,noatime " \
-		"rootfstype=ext4 rootwait\0" \
+	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
+		"ro,noatime rootfstype=ext4 rootwait\0" \
 	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
 		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 		"${vidargs}; echo Booting from internal eMMC chip...; "	\
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index fc0b1f480ce..7b68c1c0a1e 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -136,7 +136,6 @@
 /*
  * LCD
  */
-#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SPLASH_SCREEN
@@ -145,7 +144,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
-#endif
 
 /* LVDS display */
 #define CONFIG_SYS_LDB_CLOCK			33260000
@@ -205,6 +203,8 @@
 	"splashfile=boot/usplash.bmp.gz\0"				\
 	"splashimage=0x88000000\0"					\
 	"splashpos=m,m\0"						\
+	"stdout=serial,vidconsole\0"					\
+	"stderr=serial,vidconsole\0"					\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 9a3b3b1e80b..91015402efd 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -79,7 +79,6 @@
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"splashpos=m,m\0" \
 	"console=ttymxc4\0" \
diff --git a/include/sdp.h b/include/sdp.h
index f6252d027f0..6ac64fb1f31 100644
--- a/include/sdp.h
+++ b/include/sdp.h
@@ -10,6 +10,13 @@
 #define __SDP_H_
 
 int sdp_init(int controller_index);
-void sdp_handle(int controller_index);
+
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+
+int spl_sdp_handle(int controller_index, struct spl_image_info *spl_image);
+#else
+int sdp_handle(int controller_index);
+#endif
 
 #endif /* __SDP_H_ */