diff options
| author | Simon Kagstrom | 2009-08-20 10:13:06 +0200 |
|---|---|---|
| committer | Ben Warren | 2009-08-21 09:57:33 -0700 |
| commit | cad713bf7548b9e90433dac8270165402a6c9cc3 (patch) | |
| tree | a0e8607d951a0efff50ccb68420daf0cc2efabf2 /drivers | |
| parent | bb1ca3b27f7fba8c73cb10279a6a8b8b69a308ff (diff) | |
Wait for the link to come up on kirkwood network init
This patch makes the device wait for up to 5 seconds for the link to
come up, similar to what many of the other network drivers do. This
avoids confusing situations where, e.g., a tftp fails when initiated
early after U-boot has started (before the link has come up).
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/kirkwood_egiga.c | 20 |
1 files changed, 14 insertions, 6 deletions
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 065e3351169..9f366337998 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -400,6 +400,7 @@ static int kwgbe_init(struct eth_device *dev) { struct kwgbe_device *dkwgbe = to_dkwgbe(dev); struct kwgbe_registers *regs = dkwgbe->regs; + int i; /* setup RX rings */ kwgbe_init_rx_desc_ring(dkwgbe); @@ -447,13 +448,20 @@ static int kwgbe_init(struct eth_device *dev) #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) - u16 phyadr; - miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, &phyadr); - if (!miiphy_link(dev->name, phyadr)) { - printf("%s: No link on %s\n", __FUNCTION__, dev->name); - return -1; + /* Wait up to 5s for the link status */ + for (i = 0; i < 5; i++) { + u16 phyadr; + + miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, + KIRKWOOD_PHY_ADR_REQUEST, &phyadr); + /* Return if we get link up */ + if (miiphy_link(dev->name, phyadr)) + return 0; + udelay(1000000); } + + printf("No link on %s\n", dev->name); + return -1; #endif return 0; } |