diff options
Diffstat (limited to 'dts/upstream/Bindings/spi/ti_qspi.txt')
-rw-r--r-- | dts/upstream/Bindings/spi/ti_qspi.txt | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/dts/upstream/Bindings/spi/ti_qspi.txt b/dts/upstream/Bindings/spi/ti_qspi.txt deleted file mode 100644 index 47b184bce41..00000000000 --- a/dts/upstream/Bindings/spi/ti_qspi.txt +++ /dev/null @@ -1,53 +0,0 @@ -TI QSPI controller. - -Required properties: -- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi". -- reg: Should contain QSPI registers location and length. -- reg-names: Should contain the resource reg names. - - qspi_base: Qspi configuration register Address space - - qspi_mmap: Memory mapped Address space - - (optional) qspi_ctrlmod: Control module Address space -- interrupts: should contain the qspi interrupt number. -- #address-cells, #size-cells : Must be present if the device has sub-nodes -- ti,hwmods: Name of the hwmod associated to the QSPI - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -- syscon-chipselects: Handle to system control region contains QSPI - chipselect register and offset of that register. - -NOTE: TI QSPI controller requires different pinmux and IODelay -parameters for Mode-0 and Mode-3 operations, which needs to be set up by -the bootloader (U-Boot). Default configuration only supports Mode-0 -operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be -specified in the slave nodes of TI QSPI controller without appropriate -modification to bootloader. - -Example: - -For am4372: -qspi: qspi@47900000 { - compatible = "ti,am4372-qspi"; - reg = <0x47900000 0x100>, <0x30000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <25000000>; - ti,hwmods = "qspi"; -}; - -For dra7xx: -qspi: qspi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>, - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <48000000>; - ti,hwmods = "qspi"; -}; |