diff options
Diffstat (limited to 'dts/upstream/src/arm64/renesas/r9a07g044c2-smarc.dts')
| -rw-r--r-- | dts/upstream/src/arm64/renesas/r9a07g044c2-smarc.dts | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/renesas/r9a07g044c2-smarc.dts b/dts/upstream/src/arm64/renesas/r9a07g044c2-smarc.dts new file mode 100644 index 00000000000..0b90367b6d1 --- /dev/null +++ b/dts/upstream/src/arm64/renesas/r9a07g044c2-smarc.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; + +/* + * DIP-Switch SW1 setting on SoM + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD) + * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1) + * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1) + * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0) + * Please change below macros according to SW1 setting + */ + +#define SW_SD0_DEV_SEL 1 + +#define SW_SCIF_CAN 0 +#if (SW_SCIF_CAN) +/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */ +#define SW_RSPI_CAN 0 +#else +/* Please set SW_RSPI_CAN. Default value is 1 */ +#define SW_RSPI_CAN 1 +#endif + +#if (SW_SCIF_CAN && SW_RSPI_CAN) +#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" +#endif + +/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/* + * To enable MTU3a PWM on PMOD0, + * - Set DIP-Switch SW1-4 to Off position. + * - Set SW_RSPI_CAN macro to 0. + * - Set PMOD_MTU3 macro to 1. + */ +#define PMOD_MTU3 0 + +#if (PMOD_MTU3 && SW_RSPI_CAN) +#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive" +#endif + +#include "r9a07g044c2.dtsi" +#include "rzg2lc-smarc-som.dtsi" +#include "rzg2lc-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g044c2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; +}; |