aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2022-02-05spl: Provide more space to be used for storing SPL on imx28 OCRAMLukasz Majewski
2022-02-05ARM: dts: imx6ull: Use the correct name for ESAI_TX0Fabio Estevam
2022-02-05mx6: Use imx6_src_get_boot_mode() to check boot deviceHarald Seiler
2022-02-05ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 boardChristoph Niedermaier
2022-02-05imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO boardAriel D'Alessandro
2022-02-05colibri-imx8x: add on-module gpio expander fxl6408Oleksandr Suvorov
2022-02-05arm: imx8m: imx8mm-cl-iot-gate: detect extension boardYing-Chun Liu (PaulLiu)
2022-02-05arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlaysYing-Chun Liu (PaulLiu)
2022-02-05imx8ulp: implement to obtain the SoC current temperatureAlice Guo
2022-02-05imx8ulp: clock: Handle the DDRLOCKED when setting DDR clockYe Li
2022-02-05imx8ulp: clock: Support to enable/disable the ADC1 clockAlice Guo
2022-02-05imx8ulp: Update ethernet mac to get from fuseYe Li
2022-02-05imx8ulp: clock: Support to reset DCNano and MIPI DSIYe Li
2022-02-05imx8ulp: clock: Reset DDR controller before clock enableYe Li
2022-02-05imx8ulp: Workaround LPOSC_TRIM fuse load issueYe Li
2022-02-05imx8ulp: Remove freescale name from CPU revisionYe Li
2022-02-05imx8ulp: Fix DCNANO QoS settingYe Li
2022-02-05imx8ulp: Set DCNANO read QoS on NIC_LPAV to highestYe Li
2022-02-05imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for displayYe Li
2022-02-05imx8ulp: rdc: allow A35 access flexspi0 memYe Li
2022-02-05imx8ulp: clock: Add MIPI DSI clock and DCNano clockYe Li
2022-02-05imx8ulp: clock: Support LPAV clocks in cgc and pccYe Li
2022-02-05imx8ulp: assign PXP/HIFI4/EPDC to APD domainPeng Fan
2022-02-05arm: imx8ulp: Allocate LPAV resources to AP domainYe Li
2022-02-05imx8ulp: soc: Check the DBD_EN fuse before setting RDCYe Li
2022-02-05ARM: imx8m: support env in fat and ext4Ricardo Salveti
2022-02-05imx: nandbcb: Fix printf format in write_fcbPali Rohár
2022-02-05mxs: power: Change sequence of enabling DCDC switchesLukasz Majewski
2022-02-05imx8mm-venice-gw7902: fix M2_RST# gpio pinmuxTim Harvey
2022-02-05mx7ulp_com: add support for SPLRicardo Salveti
2022-02-05mx7ulp: select soc featuresOleksandr Suvorov
2022-02-05arm: imx: imx8mq: add support to get values for more clocksHeiko Thiery
2022-02-03Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
2022-02-04ARM: dts: suniv: Add device tree files and bindings for F1C100sIcenowy Zheng
2022-02-04mach-sunxi: Add support for SUNIV architectureIcenowy Zheng
2022-02-04sunxi: Add F1C100s DRAM initial supportIcenowy Zheng
2022-02-04ARM: sunxi: Add clock and uart to sunxi headersIcenowy Zheng
2022-02-04arm: arm926ej-s: Add sunxi codeIcenowy Zheng
2022-02-04mach-sunxi: Move timer code to mach folderJesse Taube
2022-02-04arm: arm926ej-s: start.S: port save_boot_params support from armv7 codeIcenowy Zheng
2022-02-04armv8: remove no longer needed lowlevel_init.SAndre Przywara
2022-02-04sunxi: move early "SRAM setup" into separate fileAndre Przywara
2022-02-04sunxi: move Cortex SMPEN setting into start.SAndre Przywara
2022-02-04sunxi: move non-essential code out of s_init()Andre Przywara
2022-02-03armv8: start.S: remove CONFIG_SYS_RESET_SCTRL codeAndre Przywara
2022-02-03armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADERAlper Nebi Yasak
2022-02-01arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet portsVladimir Oltean
2022-02-01arm: dts: ls1028a-rdb: sync device tree with LinuxVladimir Oltean
2022-02-01arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsiVladimir Oltean
2022-02-01arm: dts: ls1028a-rdb: disable I2C buses 1 through 7Vladimir Oltean
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:46:32 +0000