aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-10-08imx: nandbcb: include long help only when enabledParthiban Nallathambi
conditionally include long help text when enabled Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-08misc: imx8: add more scfw apiPeng Fan
Add more scfw api for clk/partition/seco usage The api will be used by ccf/partition/secure boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: Add support to get container image set sizePeng Fan
To avoid hardcoded offset when adding u-boot.cnt to flash.bin, we use flexible offset which is calculated based on the size of the container image generated int the first stage. And pad u-boot.cnt at 1KB alignment. So add code to get the offset when SPL loading u-boot.cnt. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: Add i.MX8MM EVK board support.Peng Fan
Add board and SoC dts Add ddr training code support SD/MMC/GPIO/PINCTRL/UART Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: add i.MX8MM pin funcPeng Fan
Import i.MX8MM pin func from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: import i.MX8MM dtsiPeng Fan
Import i.MX8MM dtsi from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: soc: probe clock device in arch_cpu_init_dmPeng Fan
Because we need to get cpu freq in print_cpuinfo at very early stage, so we need to make sure the ccm be probed. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mmc_env: update runtime SD/MMC boot env devicePeng Fan
When DM_MMC enabled, the USDHC index in U-Boot is the USDHC port. To directly return devno, we could avoid add board specific code. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add clk support for i.MX8MMPeng Fan
Introduce clk implementation for i.MX8MM, including pll configuration, ccm configuration. Mostly will be done clk dm driver, but such as DRAM part, we still use non clk dm driver, because we have limited sram. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: restructure clock.hPeng Fan
i.MX8MQ and i.MX8MM use different analog pll design, but they share same ccm design. Add clock_imx8mq.h for i.MX8MQ keep common part in clock.h Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: rename clock to clock_imx8mqPeng Fan
i.MX8MQ and i.MX8MM has totally different pll design, so rename clock to clock_imx8mq. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: restrict reset_cpuPeng Fan
Make reset_cpu only visible when CONFIG_SYSRESET not defined or CONFIG_SPL_BUILD. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: soc: enable SCTR clock before timer initPeng Fan
To i.MX8MM SCTR clock is disabled by ROM, so before timer init need to enable it. To i.MX8MQ, it does not hurt the clock is enabled again. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: Configure trustzone region 0 for non-secure accessYe Li
Set trustzone region 0 to allow both non-secure and secure access when trust zone is enabled. We found USB controller fails to access DDR if the default region 0 is secure access only. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: set BYPASS ID SWAP to avoid AXI bus errorsPeng Fan
set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to generated AXI bus errors with TZC380 enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: Fix MMU table issue for OPTEE memoryPeng Fan
When running with OPTEE, the MMU table in u-boot does not remove the OPTEE memory from its settings. So ARM speculative prefetch in u-boot may access that OPTEE memory. Due to trust zone is enabled by OPTEE and that memory is set to secure access, then the speculative prefetch will fail and cause various memory issue in u-boot. The fail address register and int_status register in trustzone has logged that speculative access from u-boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add i.MX8MM PE propertyPeng Fan
i.MX8MM does not have LVTTL, it has a PE property Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add pin header for i.MX8MMPeng Fan
Add pin header file for i.MX8MM To IMX8MM_PAD_NAND_WE_B_USDHC3_CLK, IOMUX_CONFIG_SION needs to be selected. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add get_cpu_rev support for i.MX8MMPeng Fan
There are several variants based on i.MX8MM, add the support in get_cpu_rev Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: update imx-regs for i.MX8MMPeng Fan
i.MX8MM has similar architecture with i.MX8MQ, but it has totally different PLL design and register layout change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: imx-regs: drop unused register definitionsPeng Fan
Drop unused register definitions and structures for i.MX8MQ Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: spl: add spl_board_boot_device for i.MX8MMPeng Fan
Differnet board has different controller used, it is hard to use one layout for them all. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add i.MX8MM cpu typePeng Fan
Add i.MX8MM cpu type and related helper functions Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add IMX8MM kconfig entryPeng Fan
Add IMX8MM kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add IMX8MQ kconfig entryPeng Fan
Add IMX8MQ kconfig entry, preparing support IMX8MM Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add image cfg for i.MX8MM lpddr4Peng Fan
There is no HDMI on i.MX8MM, so we need to remove HDMI entry, then we could not reuse imximage.cfg, so create a new one. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mkimage_fit_atf: Fix FIT image for correct boot orderFrieder Schrempf
Fix the FIT image metadata for i.MX8 to result in the intended boot order (SPL -> ATF -> U-Boot). Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ARM: imx: arch/arm/mach-imx/spl_qspi.cfgStefan Roese
Similar to "spl_sd.cfg", this patch introduces "spl_qspi.cfg" so that all i.MX6 based boards can use it, when they use SPL and QSPI boot mode. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2019-10-08ARM: imx: Add QSPI boot mode for i.MX6UL/ULLStefan Roese
This patch adds the missing boot mode detection for QSPI boot on i.MX6UL/ULL. Without it, booting with SPL from QSPI NOR does not work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2019-10-08imx: Kconfig: Reduce default CONFIG_CSF_SIZEBreno Matheus Lima
The default CSF_SIZE defined in Kconfig is too high and SPL cannot fit into the OCRAM in certain cases. The CSF cannot achieve 0x2000 length when using RSA 4K key which is the largest key size supported by HABv4. According to AN12056 "Encrypted Boot on HABv4 and CAAM Enabled Devices" it's recommended to pad CSF binary to 0x2000 and append DEK blob to deploy encrypted boot images. As the maximum DEK blob size is 0x58 we can reduce CSF_SIZE to 0x2060 which should cover both CSF and DEK blob length. Update default_image.c and image.c to align with this change and avoid a U-Boot proper authentication failure in HAB closed devices: Authenticate image from DDR location 0x877fffc0... bad magic magic=0x32 length=0x6131 version=0x38 bad length magic=0x32 length=0x6131 version=0x38 bad version magic=0x32 length=0x6131 version=0x38 spl: ERROR: image authentication fail Fixes: 96d27fb218 (Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets") Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-10-08imx: add the i.MX8M reset controller nodePatrick Wildt
This patch adds the reset controller node to the i.MX8MQ SoC device tree. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08imx: add support for i.MX8MQ power domain controllerPatrick Wildt
Add support for the power domain controller that's used on the i.MX8MQ. This will be needed to be able to power on the PCIe controller. Bindings taken from Linux, driver implementation taken from the i.MX8 power domain controller and adjusted for the i.MX8M SoC. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08ARM: dts: pcl063: add usdhc reset pin of eMMCParthiban Nallathambi
pcl063 phycore SoM with eMMC also got usdhc reset pin, add reset pin to pinmux. Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08imx: wandboard: convert FEC support to DM_ETHAnatolij Gustschin
Remove CONFIG_DM_ETH conversion warning to avoid board removal. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi fileLukasz Majewski
After this change it is possible to use imx28-<board>-u-boot.dtsi with the imx28-u-boot.dtsi explicitly included without breaking setup from imx28-<board>.dts file. The problem is that the imx28.dtsi included in a wrong place overrides the changes made in imx28-<board>.dts. As a result some devices are "disabled" in the final DTB. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon modeLukasz Majewski
This change tries to fix the following problem: - The board boots (to be more precise - ROM loads SPL) from a slow SPI-NOR memory. As a result the spl_boot_device() will return SPI-NOR as a boot device (which is correct). - The problem is that in 'falcon boot' the eMMC is used as a boot medium to load kernel from its partition. Calling spl_boot_device() will break things as it returns SPI-NOR device. To fix this issue the new CONFIG_SPL_FORCE_MMC_BOOT Kconfig flag is introduced to handle this special use case. By default it is not defined, so there is no change in the legacy code flow. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)Lukasz Majewski
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover, the SYSRESET_WATCHDOG driver is used to support 'reset' command. As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is enabled for it. This allows the legacy SPL code to work properly. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: SPI: Convert display5 to use SPI with DM/DTS (but no in SPL)Lukasz Majewski
The DM/DTS support for SPI is disabled on purpose for SPL, as it is not supported as of time of this conversion. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: eth: Switch display5 board to use DM_ETHLukasz Majewski
After this commit the display5 device would use FEC driver supporting driver model (DM_ETH). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: mmc: Switch display5 board to use DM_MMC and BLK (USDHC)Lukasz Majewski
After this commit the display5 device would use eMMC driver supporting driver model (DM_MMC and BLK). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: I2C: Switch display5 board to use DM_I2CLukasz Majewski
After this commit the display5 device would use I2C driver supporting driver model (DM_I2C). The 'i2c' and 'eeprom' commands now use DM I2C drivers and initialize on-bus devices according to device tree description. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08pico-imx6: Add initial supportFabio Estevam
Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08mx6: clock: Allow enable_ipu_clock() to be built for SPL codeFabio Estevam
Allow enable_ipu_clock() to be built for SPL code. This is done in preparation for configuring the NoC registers on i.MX6QP in SPL. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08configs: pico-imx7d: Convert to DM_VIDEOJoris Offouga
This commit convert all pico-imx7d to DM_VIDEO Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: sync device tree with v5.3-rc6Joris Offouga
Synchronize device tree with v5.3-rc6 label Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts changeJoris Offouga
This commit introduce u-boot.dtsi Signed-off-by: Joris Offouga <offougajoris@gmail.com> Suggested-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: cpu: fix mac fuse word for i.MX8QMPeng Fan
i.MX8QM does not share same FUSE MAC word index, so update the word index for i.MX8QM. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.cPeng Fan
Move cpu desc code to cpu driver directory and name it imx8_cpu.c No functional change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: scu_api: add sc_pm_is_partition_startedPeng Fan
Add sc_pm_is_partition_started to check whether a partition has been started. This will be used to detect M4 partition booted up or not, then we could choose which dtb to use. If M4 is up, we need use dtb, such as imx8qm-mek-rpmsg.dtb. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: fdt: add optee nodePeng Fan
Add OP-TEE device tree node for Linux according to args passed from ATF. If ATF has been built with OP-TEE running, boot_pointer[1] will indicate that. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 14:58:47 +0000